
Sign up to save your podcasts
Or
This podcast is the Santa Fe Panel from the 4th Annual HVACR Training Symposium. The panel focused on dehumidification, was moderated by Nikki Krueger, and featured Andy Ask and Ken Gehring.
"Matchmaking" a residence to the climate requires us to design and install equipment that keeps occupants healthy and comfortable. HVAC contractors need to focus on the dew points, especially as they remain high at night and in the shoulder seasons. Humidity loads tend to hold steady (even peak dew points), while sensible loads increase and drop, making it difficult to control latent heat loads the same way we control sensible loads.
The equipment will typically be less efficient if you focus on long runtimes to remove latent heat under partial load conditions and maintain 50% humidity. Dehumidifier efficiency is determined on a pint per kilowatt basis, but a constantly running dehumidifier will do its job a lot more efficiently than one that starts and stops regularly.
The dehumidifier adds heat to the house and should only come on when the HVAC system is having trouble maintaining the desired humidity load; the dehumidifier has a reheat effect, but the HVAC system will need to deal with the increased heat load. When you add a whole-house dehumidifier, adding a fresh air ventilation component is highly recommended.
Nikki, Ken, and Andy also cover:
Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.
If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.
Check out our handy calculators HERE.
4.9
981981 ratings
This podcast is the Santa Fe Panel from the 4th Annual HVACR Training Symposium. The panel focused on dehumidification, was moderated by Nikki Krueger, and featured Andy Ask and Ken Gehring.
"Matchmaking" a residence to the climate requires us to design and install equipment that keeps occupants healthy and comfortable. HVAC contractors need to focus on the dew points, especially as they remain high at night and in the shoulder seasons. Humidity loads tend to hold steady (even peak dew points), while sensible loads increase and drop, making it difficult to control latent heat loads the same way we control sensible loads.
The equipment will typically be less efficient if you focus on long runtimes to remove latent heat under partial load conditions and maintain 50% humidity. Dehumidifier efficiency is determined on a pint per kilowatt basis, but a constantly running dehumidifier will do its job a lot more efficiently than one that starts and stops regularly.
The dehumidifier adds heat to the house and should only come on when the HVAC system is having trouble maintaining the desired humidity load; the dehumidifier has a reheat effect, but the HVAC system will need to deal with the increased heat load. When you add a whole-house dehumidifier, adding a fresh air ventilation component is highly recommended.
Nikki, Ken, and Andy also cover:
Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.
If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.
Check out our handy calculators HERE.
149 Listeners
70 Listeners
722 Listeners
209 Listeners
110 Listeners
107 Listeners
17 Listeners
89 Listeners
443 Listeners
87 Listeners
329 Listeners
15 Listeners
30 Listeners
11 Listeners
6 Listeners