496 Bedside Tables pt 2

Welcome back to part 2 of the Bedside Table Build. We again have some wide panels that will make up the sides of the tables and they need to be milled and glued up. But rather than tackling the task by “going ALL hand plane” on the wide boards like last week I decided to mix it up a little and use both hand planes AND power tools. In other words, living up to my claim to be a “hybrid woodworker”. The task is a pretty simple one. It’s a matter of knocking down the high spots of the concave side of the board with my Jack plane until it lays flat and doesn’t rock. Then it’s over to the thickness planer to do the rest of the work. Typically it takes more time to run it through the thickness planer than to knock down those high spots, but of course the board I chose for the video was the only one of the 8 pieces that decided to be difficult and took much longer than the others. The other tasks we complete in this episode are gluing up these wide panels, including a quick touch up of the edges with my Edge Trimming Plane and then prepping the stock that will become the legs for each table. In the next episode, we’ll start working on the joinery and begin to assemble the entire project from that point forward. Help support the show - please visit our advertisers: