3D Printing Made Easy

By Printara 3D

Bite-sized 3D printing knowledge for hobbyists. New episode every week. Covering materials, printers, settings, and real-world tips.... more

· Technology

Download on the App Store

Download on the App Store

Get it on Google Play

FAQs about 3D Printing Made Easy:

How many episodes does 3D Printing Made Easy have?

The podcast currently has 39 episodes available.

3D Printing Made Easy episodes:

September 17, 2026P1S vs P2S and Why Your Enclosure Won't Dry Filament
Both articles cover the enclosed Bambu Lab P series, and how the sealed chamber that stabilizes temperature still cannot pull deep moisture out of filament, so a dryer stays essential.
In this episode you'll learn:
The Bambu Lab P1S and P2S share the identical 256 x 256 x 256 mm build volume, so the P2S adds no extra print size.

Bambu Lab says the P1S stays in production with no plan to discontinue it, so P1S and P2S sell side by side.

The P2S raises the maximum heated bed temperature, adds hardened wear parts to the print head, and adds a bigger local screen with onboard storage.

The enclosed P series chamber holds a stable inside temperature but will not remove moisture soaked deep into the filament structure.

At melt temperature water molecules irreversibly shorten polymer chains, which permanently degrades strength, heat resistance, and chemical resistance.
Read the full guides on our site: Bambu Lab P1S vs P2S: Specs, Differences, and Who Should Upgrade · Filament Dryers: When You Need One and How to Choose
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
21min
September 11, 2026Bambu Lab A1 vs A1 Mini and Is AMS Lite Worth It
Picking your first Bambu Lab A-series printer means matching build volume and the AMS Lite multicolor upgrade to what you actually plan to print, not to marketing numbers.
In this episode you'll learn:
The A1 has a 256 x 256 x 256 mm build volume; the A1 Mini is limited to 180 x 180 x 180 mm.

The A1 heated bed reaches 100°C while the A1 Mini stops at 80°C; both share a 300°C nozzle ceiling.

AMS Lite is an open stand feeding up to four spools and switching between them automatically during a print.

AMS Lite can act as a backup, switching to the next compatible spool when one runs out so the print continues.

The A1 Combo adds the AMS Lite body, four rotary spool holders, and two 730 mm plus two 830 mm PTFE tubes; the bare A1 ships with a single 600 mm tube.
Read the full guides on our site: Bambu Lab A1 vs A1 Mini: Which First Printer to Buy · Bambu Lab A1 Combo vs A1: Is AMS lite Worth It?
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
22min
September 04, 2026Winter 3D Printer Buying and Safe ABS Printing at Home
Both articles help you match a printer to what you actually print, since choosing ABS for technical parts forces decisions about enclosure and ventilation.
In this episode you'll learn:
ABS prints at a nozzle temperature of roughly 240°C to 260°C with a heated bed around 90°C to 110°C.

ABS releases styrene, other VOCs, and ultrafine particles smaller than 100 nanometers as it melts and cools.

Prusa Research documentation registers 3D printers as producers of harmful VOCs and ultrafine particles.

A standard 0.4 mm brass nozzle handles most everyday prints, but fiber-filled composites require a hardened nozzle.

Activated carbon captures odor and gaseous VOCs but not particles, while a mechanical filter traps particles but lets VOCs pass, so effective filtration combines both.
Read the full guides on our site: Buyer’s Guide 2026: Which 3D Printer to Buy This Winter · Printing ABS at Home Safely: Ventilation, VOCs, Fine Particles
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
18min
August 27, 2026Scaling to a Print Farm Without the Maintenance Meltdown
Both articles cover the jump from a single hobby printer to a small farm of 3 to 10 machines, where standardization and disciplined maintenance decide whether the operation stays profitable.
In this episode you'll learn:
Prusa Research grew its own print farm from 6 printers to 600 and still uses it to make parts for the printers it sells.

The University of Calgary makerspace has run more than 70 MK4 printers and 4 XLs since 2017, serving over 3,000 students a year.

Ten identical machines mean one print profile, one set of spare parts, and one maintenance procedure, so standardization saves time on a farm.

In the Bambu Lab ecosystem the A1 line suits PLA and PETG, while the enclosed P1S and X1C handle technical materials.

Manufacturers advise checking and servicing key components every few hundred print hours, even on a machine running flawlessly.
Read the full guides on our site: Print Farm: How to Run 3 to 10 Printers Without Chaos · 3D Printer Maintenance: Calibration, Nozzle Swaps, Lube, Cleaning
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
22min
August 20, 2026Dry Spools and Recycled Filament: Full Lifecycle
Both articles treat filament as a long game, one about keeping it dry so it stays printable, the other about where it came from and whether recycled rPLA and rPETG are worth buying.
In this episode you'll learn:
Most FFF filaments are hygroscopic and pull water vapor from the air, so a spool absorbs moisture on the shelf, during long prints, or in packaging that does not seal well.

At melt temperature water molecules irreversibly shorten the polymer chains, producing brittle or oddly flexible prints with reduced thermal and chemical resistance.

Wet filament shows up as popping and hissing in the nozzle, stringing, oozing, blobs, poor layer adhesion, and under-extrusion that can clog the nozzle.

Prusament PLA Recycled is made from 100% Prusament PLA production waste, and because colors are mixed without added pigment every batch has a different shade.

Filamentive uses homogeneous offcuts from partner extruders (fishing line, fencing) and reaches up to 90% recycled content.
Read the full guides on our site: Drying Filament: Why and How (Dryer, Oven, Dry Box) · Recycled Filament rPLA and rPETG: Saves Money and the Planet?
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
21min
August 13, 2026AMS Color Swaps and Soluble Supports Explained
Both multi-color AMS printing and soluble supports run on the same filament-swap mechanics, so both cost you extra material and time you should budget for before you press print.
In this episode you'll learn:
Bambu Lab introduced the AMS in May 2022 alongside the X1 Carbon; the box has four slots, two desiccant compartments, and a humidity sensor but no heater, so it keeps filament dry rather than actively drying it.

A standard 0.4 mm hotend holds roughly 50 to 100 mm3 of molten plastic, so the first few centimeters after each color change carry the old color and must be flushed to a purge tower, a purge object, or the infill.

UltiMaker's data sheet lists PVA with a glass transition of 58.4°C, a melting temperature of 175.4°C, and a density of 1.23 g/cm3; PVA dissolves in plain water and is biodegradable.

Prusa recommends HIPS at a 225°C to 255°C nozzle and a 100°C to 110°C bed, the same range as ABS, and HIPS dissolves in limonene or acetone.

Bambu Lab's general support guide states PVA is not compatible as a support for PETG, and for the H2D warns against printing PVA and PETG at the same time from the left and right nozzles; Prusa recommends BVOH for PETG instead.
Read the full guides on our site: Multi-Color Printing with AMS: When It Pays Off, When It Doesn’t · PVA vs HIPS: Soluble Supports for PLA, PETG and ABS
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
22min
August 06, 2026Choosing a 3D Printer Without Overpaying or Outgrowing It
Both articles argue that picking an FDM printer is about matching the machine to your use case, not chasing the lowest sticker price, because real cost shows up during calibration, maintenance, and expansion.
In this episode you'll learn:
Article 1 splits the FDM market into three buckets: budget (lowest entry barrier), flagship (time, reliability, integrated ecosystem), and DIY/kit (control, openness, unlimited modification).

The budget class saves money exactly on the parts that determine hassle-free printing: automatic bed leveling, frame rigidity, extruder quality, and flow calibration.

The Bambu Lab A1 and P1S are named as machines that raised the bar by integrating auto bed leveling and flow calibration by default.

Article 2's month covered three weeks: choosing a first printer, maintenance and consumables (nozzles, PTFE tubes, print surfaces), and expanding into AMS and multi-material printing.

Total ownership cost beyond purchase price includes filament consumption, spare nozzles, a build plate, and time spent tuning.
Read the full guides on our site: 3D Printer Buying Guide: Budget vs Flagship vs DIY · 3D Printer Buying Mistakes: Reader Q&A on Hardware
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
23min
July 30, 2026Fusion 360 vs Blender: Pick Your First CAD Tool
Both articles compare the two main free modeling paths hobbyists use for 3D printing: parametric CAD in Fusion 360 for precise functional parts, and mesh sculpting in Blender for organic shapes.
In this episode you'll learn:
Fusion 360 offers a free personal-use license for hobbyists that includes most features needed for 3D printing, though with limits versus the paid subscription.

Prusa Research offers a structured online course in 3D modeling with Autodesk Fusion aimed at complete beginners.

For 3D printing, most Fusion 360 users only touch a subset of tools: sketch, extrude, fillet, and chamfer.

Blender is fully free and works with a polygonal mesh of thousands to millions of triangles and quads that you shape like digital clay.

Blender navigation uses middle mouse button to rotate, Shift plus middle button to pan, and scroll to zoom, with three core modes: Object, Edit, and Sculpt.
Read the full guides on our site: Fusion 360 for 3D Printing: Your First Model in 30 Minutes · Blender for 3D Printing: Organic Modeling Without CAD
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
26min
July 24, 2026Prusa XL vs Voron 2.4: Buy the Toolchanger or Build It
Both articles tackle the advanced maker's fork in the road for flagship CoreXY machines: pay for a finished 5-tool toolchanger (Prusa XL) or build an open-source printer yourself (Voron 2.4).
In this episode you'll learn:
The Original Prusa XL is a CoreXY printer with a 360x360x360 mm build volume and a toolchanger holding up to five independent print heads, each with its own nozzle, filament, and temperature.

Each XL tool is built on the Nextruder extruder and parks in a docking station at the edge of the machine; the carriage sets down one head and mechanically couples with the next in a few seconds.

Because each XL tool stays permanently heated and ready, color changes swap the whole head instead of purging one shared nozzle, cutting the waste of a purge tower that can exceed the size of the part itself.

The Voron 2.4 is an open-source CoreXY printer released in May 2020 by the Voron Design team founded by Maks Zolin, with public documentation, CAD, STL parts, and firmware; you build it from a bill of materials or a third-party kit.

The Voron 2.4 uses a flying gantry raised by four independently driven Z motors that self-levels against the bed, plus the community StealthBurner direct-drive toolhead, and ships fully enclosed.
Read the full guides on our site: Prusa XL: 5-Tool Toolchanger for Dual-Color & Multi-Material · Voron 2.4 in 2026: Is Building Your Own Printer Worth It?
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
21min
July 16, 2026Under 15000 CZK in 2026: A1 mini as Your First Printer
Both articles show that sub-15000 CZK FDM printers now ship with full auto-calibration, and the Bambu A1 mini is the cheapest gateway into color-capable, hands-off printing for a first-time buyer.
In this episode you'll learn:
The Bambu Lab A1 mini base version runs around 299 dollars, and the Combo with AMS lite is around 459 dollars.

The A1 mini build volume is 180 x 180 x 180 mm; the full-size A1 offers a 256 mm print area.

Bambu Lab introduced the A series in late 2023, targeting everyday consumers and beginners rather than prosumers.

The A1 mini arrives pre-assembled and pre-leveled, and the manufacturer says it is ready for a first print in roughly 20 minutes.

The enclosed Creality K1C typically sits in the 11000 to 13000 CZK range depending on the current deal.
Read the full guides on our site: Bambu Lab A1 mini: Cheapest Way Into the Bambu Ecosystem · 3D Printer Under $600: Bambu A1, Creality K1C, Kobra 3
New to 3D printing? Take our free beginner course: printara3d.com/course
Watch on YouTube: 3D Printing Made Easy playlist
We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.
This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.
...more
21min

FAQs about 3D Printing Made Easy:

How many episodes does 3D Printing Made Easy have?

The podcast currently has 39 episodes available.