Today we're talking with, Erik Larson, who is a firmware engineer with some interesting background! He joins Chris to review the Advanced BLE-Cell (ABC) board, which is also a new course on Contextual Electronics.

Erik has worked at places like Honeywell Aerospace, Apriva and Hologram (where he and Chris met). Erik is now a full time consultant for his own company, Statropy Software LLC.

Erik was the firmware engineer on the Hologram Dash, which was an embedded module that Hologram used to make for people to get started making cellular connected devices.

During his career, he had to learn how to code remotely on a VAX! This meant being very careful with code check-ins

Erik and Chris review some of the "Must check" sections of schematics, in order to get firmware and hardware talking properly:

Pin selection on a microcontroller

Programming elements, including the bootloader

Understanding the peripherals of the specific chip you're using

The board we're reviewing is the Advanced BLE-CELL (ABC) board, which is designed as part of a Contextual Electronics course. You can follow along and watch the entire design of this board if you're a member of Contextual Electronics.

Here is the schematic, as shown in the video (has since been updated for the course, as has the layout)

Check out the nRF52840 Product Specification (datasheet)

Erik recommends getting a development board and breakout boards before the hardware arrives.

You can hire Erik to help with your next firmware project on his website, Statropy Software, LLC

 

That's our third episode, which is the last in our initial release of shows!

Please follow us on social media:

@Chris_Gammell on Twitter

@ContextualElec on Twitter

Contextual Electronics on Facebook

Contextual Electronics on LinkedIn

Please consider leaving us a review

iTunes page for subscribing and reviewing

Video version of the podcast:

Audio version of the podcast: