October 20, 2015

Ham Radio 360: Your 2nd HT. Choices, Options, Reasons…

1 hour 21 minutes

In Episode 37, Ed Bradshaw, W4EDF, joins the show to share his well-thought-out opinions on the features and importance of upgrading from the low-cost Chinese handi-talkie (HT) that many new hams begin with. While the show is not meant to disregard intro-level HTs, it aims to help those looking for an upgrade by discussing the ins and outs of higher-end handi-talkies. The hosts touch on various models, highlighting their commonalities and differences, from battery chemistry and charging circuits to display size and memory banks. Listeners can learn how to wade through the specs to find the right HT for their needs.

As Mentioned:

Linux in the HamShack Podcast

Episode 36-DStar

ARRL QST Magazine

KF7IJZ You Tube Channel

The ID-51A Plus uses 2.5A while transmitting 5W. The charger is rated at 2A. That is the reason you don’t want to use it for anything but charging. You would probably be OK on lower power but it’s best to have a dedicated power source.

Icom says that you can use the car charger for operation but the manual states: “NOTE: Up to 5 W (approximately) of maximum out-put power is possible when using external DC power. However, when the supply voltage exceeds 14 V, the built-in protection circuit activates to reduce the transmit output power to approximately 2.5 W.”

So, as always, check your manual before using your charger during transmit.

Thanks for listening, sharing, subscribing, reviewing and supporting!

73 Y’all

K4CDN

...more