Osborne's Marine Residue Dissolver is a boat propeller cleaning product developed for the DIY market that works to loosen and lift stubborn marine growth. Formulated using organic salts this product is a simple to use alternative to acids and power tools for cleaning your running gear (Shafts, Rudders, Trim Tabs and Propellers).

The Green Boater meets up with JODY BELL, VP of Sales and Marketing, Osborne Propellers, at the 2019 Vancouver Boat Show to learn about their Residue Dissolver.

This prop cleaner is an effective alternative for barnacle removal from boat propellers made from brass or stainless steel. It is easy and safe to use and does not harm the environment.

NOTE:  Not to be used on bare aluminum.

=> Watch Full Episode on The Green Boater TV:  https://youtu.be/icykTOvtmNg

INSTRUCTIONS TO USE BOAT PROP CLEANER

1. Spray the area to be cleaned with water before applying Osborne’s marine residue dissolver product.

2. Twist the spray lock on the bottle to the spray position by pushing down on the yellow plastic pin and turning the

end of the nozzle at the same time; selecting the desired spray pattern (wide or narrow)

3. Spray the product onto the surface to be cleaned and allow to sit for 30 seconds to 1 minute. Work in small

sections (1 face of 1 propeller blade at a time).

4. Use a suitable metal scraper to remove the bulk of the marine growth and barnacles re-spraying as needed until

the surface is basically free of materials.

5. Rinse well with water

6. Re-spray the area with Barnacle Dissolver and then scrub vigorously with 3M Stripping pad (or similar)

7. Re-spray the area with Barnacle Dissolver and then polish with a 60 grit sanding sponge.

8. RINSE WELL WITH WATER

Osborne Propellers

http://www.osbornepropellers.com