<a href="https://macrofab.com/blog/mep-ep291-vaporized-copper-stiction">MEP EP#291: Vaporized Copper Stiction</a> Bias Test system update
<ul>
	<li>Happy with the two A/D Converters. Got *all* channels running</li>
	<li>Made a simple breakout board to be able to access all the pins easier</li>
	<li>16 pin IDC cable is holding up to 450V seemingly ok - real test will be with all signals</li>
	<li>Resistor measurement was adjusted slightly</li>
	<li>Checked against 4 multimeter and getting values “in range”</li>
</ul>
<ul>
	<li>Next steps

<ul>
	<li>Finish a first version of the arduino code</li>
	<li>Merge the skipi communication with my code</li>
	<li>Solder into an actual amp to get real world values</li>
	<li>Schedule next python thing</li>
</ul>
</li>
</ul>
Jiva Materials
<ul>
	<li>“The World’s First Fully Recyclable PCB Substrate”</li>
	<li><a href="https://www.jivamaterials.com/">https://www.jivamaterials.com/</a></li>
	<li>PCB board that when soaked in hot water starts to delaminate

<ul>
	<li>Jiva is in the process of ensuring that Soluboard® is compatible with aqueous PCB fabrication processes. Jiva is also engineering Soluboard® to be resistant to high humidity environments.</li>
</ul>
</li>
	<li>No technical specifications yet</li>
	<li>Circuits/metals are applied in traditional ways (plating and etching)</li>
</ul>
Relay Dissection 
<ul>
	<li>Had a relay stick closed during some “experimenting”</li>
	<li>Cut off the top to find out what happened</li>
</ul>
Fixing circuit boards
<ul>
	<li>Methods </li>
	<li><a href="https://www.reddit.com/r/AskElectronics/comments/p5lgkf/possible_to_fix/" rel="noopener">Reddit post/thread that spawned the converstation</a></li>
</ul>

MEP EP#291: Vaporized Copper Stiction Bias Test system update Happy with the two A/D Converters. Got *all* channels running Made a simple breakout board to be able to access all the pins easier 16 pin IDC cable is holding up to 450V seemingly ok - real test will be with all signals Resistor measurement was adjusted slightly Checked against 4 multimeter and getting values “in range” Next steps Finish a first version of the arduino code Merge the skipi communication with my code Solder into an actual amp to get real world values Schedule next python thing Jiva Materials “The World’s First Fully Recyclable PCB Substrate” https://www.jivamaterials.com/ PCB board that when soaked in hot water starts to delaminate Jiva is in the process of ensuring that Soluboard® is compatible with aqueous PCB fabrication processes. Jiva is also engineering Soluboard® to be resistant to high humidity environments. No technical specifications yet Circuits/metals are applied in traditional ways (plating and etching) Relay Dissection Had a relay stick closed during some “experimenting” Cut off the top to find out what happened Fixing circuit boards Methods Reddit post/thread that spawned the converstation

<a href="https://macrofab.com/blog/mep-ep291-vaporized-copper-stiction" rel="noopener noreferrer">MEP EP#291: Vaporized Copper Stiction</a> Bias Test system update
<ul>
	<li>Happy with the two A/D Converters. Got *all* channels running</li>
	<li>Made a simple breakout board to be able to access all the pins easier</li>
	<li>16 pin IDC cable is holding up to 450V seemingly ok - real test will be with all signals</li>
	<li>Resistor measurement was adjusted slightly</li>
	<li>Checked against 4 multimeter and getting values “in range”</li>
</ul>
<ul>
	<li>Next steps

<ul>
	<li>Finish a first version of the arduino code</li>
	<li>Merge the skipi communication with my code</li>
	<li>Solder into an actual amp to get real world values</li>
	<li>Schedule next python thing</li>
</ul>
</li>
</ul>
Jiva Materials
<ul>
	<li>“The World’s First Fully Recyclable PCB Substrate”</li>
	<li><a href="https://www.jivamaterials.com/" rel="noopener noreferrer">https://www.jivamaterials.com/</a></li>
	<li>PCB board that when soaked in hot water starts to delaminate

<ul>
	<li>Jiva is in the process of ensuring that Soluboard® is compatible with aqueous PCB fabrication processes. Jiva is also engineering Soluboard® to be resistant to high humidity environments.</li>
</ul>
</li>
	<li>No technical specifications yet</li>
	<li>Circuits/metals are applied in traditional ways (plating and etching)</li>
</ul>
Relay Dissection 
<ul>
	<li>Had a relay stick closed during some “experimenting”</li>
	<li>Cut off the top to find out what happened</li>
</ul>
Fixing circuit boards
<ul>
	<li>Methods </li>
	<li><a href="https://www.reddit.com/r/AskElectronics/comments/p5lgkf/possible_to_fix/" rel="noopener noreferrer">Reddit post/thread that spawned the converstation</a></li>
</ul>

MEP EP#291: Vaporized Copper Stiction

Dive into the electrifying world of electrical engineering with Circuit Break, a MacroFab podcast hosted by Parker Dillmann and Stephen Kraig. This dynamic duo, armed with practical experience and a palpable passion for tech, explores the latest innovations, industry news, and practical challenges in the field. From DIY project hurdles to deep dives with industry experts, Parker and Stephen's real-world insights provide an engaging learning experience that bridges theory and practice for engineers at any stage of their career.

Whether you're a student eager to grasp what the job market seeks, or an engineer keen to stay ahead in the fast-paced tech world, Circuit Break is your go-to. The hosts, alongside a vibrant community of engineers, makers, and leaders, dissect product evolutions, demystify the journey of tech from lab to market, and reverse engineer the processes behind groundbreaking advancements. Their candid discussions not only enlighten but also inspire listeners to explore the limitless possibilities within electrical engineering.

Presented by MacroFab, a leader in electronics manufacturing services, Circuit Break connects listeners directly to the forefront of PCB design, assembly, and innovation. MacroFab's platform exemplifies the seamless integration of design and manufacturing, catering to a broad audience from hobbyists to professionals.

About the hosts: Parker, an expert in Embedded System Design and DSP, and Stephen, an aficionado of audio electronics and brewing tech, bring a wealth of knowledge and a unique perspective to the show. Their backgrounds in engineering and hands-on projects make each episode a blend of expertise, enthusiasm, and practical advice.

Join the conversation and community at our online engineering forum, where we delve deeper into each episode's content, gather your feedback, and explore the topics you're curious about. Subscribe to Circuit Break on your favorite podcast platform and become part of our journey through the fascinating world of electrical engineering.

Science

Technology

Dive into the electrifying world of electrical engineering with Circuit Break, a MacroFab podcast hosted by Parker Dillmann and Stephen Kraig. This dynamic duo, armed with practical experience and a palpable passion for tech, explores the latest innovations, industry news, and practical challenges in the field. From DIY project hurdles to deep dives with industry experts, Parker and Stephen's real-world insights provide an engaging learning experience that bridges theory and practice for engineers at any stage of their career. Whether you're a student eager to grasp what the job market seeks, or an engineer keen to stay ahead in the fast-paced tech world, Circuit Break is your go-to. The hosts, alongside a vibrant community of engineers, makers, and leaders, dissect product evolutions, demystify the journey of tech from lab to market, and reverse engineer the processes behind groundbreaking advancements. Their candid discussions not only enlighten but also inspire listeners to explore the limitless possibilities within electrical engineering. Presented by MacroFab, a leader in electronics manufacturing services, Circuit Break connects listeners directly to the forefront of PCB design, assembly, and innovation. MacroFab's platform exemplifies the seamless integration of design and manufacturing, catering to a broad audience from hobbyists to professionals. About the hosts: Parker, an expert in Embedded System Design and DSP, and Stephen, an aficionado of audio electronics and brewing tech, bring a wealth of knowledge and a unique perspective to the show. Their backgrounds in engineering and hands-on projects make each episode a blend of expertise, enthusiasm, and practical advice. Join the conversation and community at our online engineering forum, where we delve deeper into each episode's content, gather your feedback, and explore the topics you're curious about. Subscribe to Circuit Break on your favorite podcast platform and become part of our journey through the fascinating world of electrical engineering.

Share MEP EP#291: Vaporized Copper Stiction

Sign up to save your podcasts

MEP EP#291: Vaporized Copper Stiction

MEP EP#291: Vaporized Copper Stiction

More shows like Circuit Break - A MacroFab Podcast

The Amp Hour Electronics Podcast

Embedded

All Ears English Podcast

Recording Studio Rockstars

Well There‘s Your Problem

The Rest Is History

The Carmudgeon Show