Protecting Your Home with Crystal Grid Energy

Many crystals are naturally protective, and some well-placed ones can really come together to create Mother Nature’s ultimate home-security grid! Follow these simple steps to create your own special protection grid for security, comfort, and peace of mind.

I am often asked about using crystals for energetic protection. Creating a crystal grid is a simple way to work with crystal energy for protection. In this post, I'm sharing a simple method for energetically protecting your home with crystal grid energy. This crystal grid recipe uses only 2 types of stones. Even better, they can be used effectively in any dwelling.

To create an initial energetic shield to protect your home, place Black Tourmaline in each exterior corner. You can then place Selenite along each of the walls and any exterior doorways or windows. This will energetically connect the Tourmaline stones. The Tourmaline acts to set an energetic protective boundary while the Selenite aids in cleansing and purification.

Watch Now: How to Protect Your Home with Crystal Energy

My ideal grid for protecting your home with crystal grid energy:

The diagram of the home below shows my ideal set up. This setup uses 12 pieces of Black Tourmaline, one in each exterior corner of the home. It also uses 14 pieces of Selenite (at least one on each exterior wall where there is no window PLUS one over each exterior door and each window).

However, if this many stones is not within your budget, or if there would be safety concerns over placing the stones in children's rooms, etc. you can absolutely reduce the total number of stones. Do this by placing the Tourmalines in just the outermost corners of the home. This can be reduced to only 6 pieces.

Additionally, by placing just one piece of Selenite per exterior wall (but still making sure to place one above each exterior window or door), the number of pieces of Selenite used is reduced to only 7 pieces. The resulting grid would still be very effective for most situations. Also, it would only be a fraction of the cost. This makes energetic home protection a bit easier on your pocketbook, which is always a bonus!

Setting Up Your Grid for Energetic Protection:

Before placing the stones, they should be cleansed. As you place each crystal in the grid, hold your intention clearly in your mind. This may be something like, “This crystal adds to the energy of my grid and helps to creates a protective energetic boundary around my home.” OR “This crystal energetically protects me and my family in our home.”

After placing the stones, it is recommended that you “activate” the grid.

Activating your grid means to energetically link the crystals together. Since this is a large scale grid, the activation process is a bit different than it would be for a small, tabletop crystal grid.

To activate your grid, you'll need a Crystal Laser Wand (a single-terminated clear Quartz point) or an additional piece of Selenite. Alternatively, you can even just activate your grid with your finger. Point the crystal or your finger toward the first crystal in the grid.