
Sign up to save your podcasts
Or
I was asked to start sharing these livestreams as a podcast for people who want to listen while working. I'm going to give it a go and see if they jive with the normal podcast uploads or not. This was from the livestream with RC Amigos last night on the CCxRC channel. We discussed the Enduro24 "Tiny Gappin' It" Build Off we are doing.
Who wants to try something a bit different? You do? Cool. The plan is to have a competition to see who can take an Element RC Enduro24 and make it into the fastest drag truck within a 90' x 12' area. You must film the entirety of your run by first verifying the speedometer is zeroed out before driving, then show the run, and end by showing the speed achieved all in one continuous clip. Your run must start and stop within the 90' distance and not veer outside the 12' width of the lane. Cones, tape, or other items can be used to show the width and length of the area. There is a bit of an honor system for the measurements, but you should have them visibly marked.
The goal is to have fun, but friendly competition can be fun too, right? So there are some rules to keep us from going to crazy with this build off.
RULES:
- Final videos must be posted by March 13, 2022 at 11:59pm PDT and a link sent to me through the contact page CCxRC.com: https://www.ccxrc.com/contact
- Start off with an Element RC Enduro24
- Must use at least 2 stock Enduro 24 rails. They can be cut or added onto.
- Must use the rear axle. You can modify it to have different link mounts, or other mods.
- No more than 2 axles
- 12” max wheelbase
- 6” max width
- 40a ESC Max
- Limited to one motor.
- Transmission can be changed or removed and use direct drive
- Max 3s lipo
- 1” max wheels
- 2.5” max tire height
- Dualies are allowed
- Track boundaries are 90ft x 12 ft. Surface must be flat. No hills.
- No Throwing the vehicles for speed. :)
- Cannot have any other added propulsion (rockets, fans, etc).
- Must have a body that covers at least 50% of the chassis
Hastags to use on Instagram during your build:
- Use the hastag #tinygappinit #enduro24 #talkyourfaceoff
- Tag @RC_Amigos and @CCxRC so we can see the progress of your builds HOW TO ENTER YOUR
SUBMISSION:
- Final videos must be posted to Instagram or YouTube by Sunday, March 13 11:59pm PDT (yes, Daylight Savings Time starts that day).
That will give us Monday, March 14 to go through them and find the top speeds.
- Videos are submitted to us by sending a link through the contact page on this site.
- Please tell us the top speed you reached in your message to us on the contact page. This will help us find the top speeds and allows us to verify that rules were met.
If you aren't subscribed to RC Amigos on YouTube or Instagram, now is your chance. You definitely want to. Don't make me use my cat as collateral...
Youtube: https://bit.ly/themanmythandlegend
Instagram: https://www.instagram.com/rc_amigos/
4.6
3232 ratings
I was asked to start sharing these livestreams as a podcast for people who want to listen while working. I'm going to give it a go and see if they jive with the normal podcast uploads or not. This was from the livestream with RC Amigos last night on the CCxRC channel. We discussed the Enduro24 "Tiny Gappin' It" Build Off we are doing.
Who wants to try something a bit different? You do? Cool. The plan is to have a competition to see who can take an Element RC Enduro24 and make it into the fastest drag truck within a 90' x 12' area. You must film the entirety of your run by first verifying the speedometer is zeroed out before driving, then show the run, and end by showing the speed achieved all in one continuous clip. Your run must start and stop within the 90' distance and not veer outside the 12' width of the lane. Cones, tape, or other items can be used to show the width and length of the area. There is a bit of an honor system for the measurements, but you should have them visibly marked.
The goal is to have fun, but friendly competition can be fun too, right? So there are some rules to keep us from going to crazy with this build off.
RULES:
- Final videos must be posted by March 13, 2022 at 11:59pm PDT and a link sent to me through the contact page CCxRC.com: https://www.ccxrc.com/contact
- Start off with an Element RC Enduro24
- Must use at least 2 stock Enduro 24 rails. They can be cut or added onto.
- Must use the rear axle. You can modify it to have different link mounts, or other mods.
- No more than 2 axles
- 12” max wheelbase
- 6” max width
- 40a ESC Max
- Limited to one motor.
- Transmission can be changed or removed and use direct drive
- Max 3s lipo
- 1” max wheels
- 2.5” max tire height
- Dualies are allowed
- Track boundaries are 90ft x 12 ft. Surface must be flat. No hills.
- No Throwing the vehicles for speed. :)
- Cannot have any other added propulsion (rockets, fans, etc).
- Must have a body that covers at least 50% of the chassis
Hastags to use on Instagram during your build:
- Use the hastag #tinygappinit #enduro24 #talkyourfaceoff
- Tag @RC_Amigos and @CCxRC so we can see the progress of your builds HOW TO ENTER YOUR
SUBMISSION:
- Final videos must be posted to Instagram or YouTube by Sunday, March 13 11:59pm PDT (yes, Daylight Savings Time starts that day).
That will give us Monday, March 14 to go through them and find the top speeds.
- Videos are submitted to us by sending a link through the contact page on this site.
- Please tell us the top speed you reached in your message to us on the contact page. This will help us find the top speeds and allows us to verify that rules were met.
If you aren't subscribed to RC Amigos on YouTube or Instagram, now is your chance. You definitely want to. Don't make me use my cat as collateral...
Youtube: https://bit.ly/themanmythandlegend
Instagram: https://www.instagram.com/rc_amigos/
77,477 Listeners
14,014 Listeners
2,065 Listeners
223,304 Listeners
32,031 Listeners
30 Listeners
4,609 Listeners
20,208 Listeners
71 Listeners
14 Listeners
23,735 Listeners
679 Listeners
12,328 Listeners
3 Listeners
4 Listeners