Today we're installing the doors on the Walnut Buffet.  The design requires inset doors, which can be very tricky to get placed correctly for an uniform reveal on all four edges.  Thankfully I chose European style hinges for the hardware.  The benefit of these style hinges vs a traditional pin version is the built in adjusters which make achieving an uniform revel as easy as turning a screw or two. 

But before we get to the hinge installation we need to trim and adjust the solid wood wraps on the walnut plywood to fit in the door openings.  The fastest way to do this I've found is using my block or smoothing plane.  In fact we'll take a closer look at doing just that in the second half of the show.


Help support the show - please visit our advertisers


454 Walnut Buffet Pt 4

This is the video only feed for Matt's Basement Workshop Podcast.  If you prefer to watch your woodworking content this is the feed for you!

Education

Training

Language Courses

Higher Education

K-12

Educational Technology

Games & Hobbies

Video Games

Other Games

Hobbies

Automotive

Aviation

You have questions and comments about the simple thickness planer sled? I have answers; although I can’t guarantee they’re the ones you want to hear. Thanks to everyone who wrote in!

556 Simple Planer Sled Q&A Follow Up

I can't believe this is happening to me, but I'm getting bit by the turning bug and it's obvious it's contagious! Now that my time in the shop is currently less than it use to be, I really want to be able to knock out a project or two from start to finish, and the lathe is probably one of the one tools where this is entirely possible. In today's episode I'm literally turning some scrap maple into a small bowl. What'll I use it for? Probably to hold keys, or spare change, or more likely M&M's! In this episode I made quite a few references to the Easy Wood Tools' gouges and detailers I was using (pretty much the entire time.) If you're interested in purchasing them or just checking them out or yourself, you can find them at Woodcraft.com Help support the show - please visit our advertisers

554 Small bowl for holding stuff

Who doesn't need a little more storage space? Whether it's in the woodshop like me, or any where else throughout your living space, small cabinets help to tuck away the clutter and keep things organized. In this episode we're making a simple, small cabinet from supplies you can easily pick up at just about any home center. For this one I purchased a few "handi-panels" which are pre-glued and dimensioned boards that eliminate most of the milling we'd have to perform to get them ready for cutting and assembling. I also purchased some adjustable "euro-style" hinges and a simple wooden knob for the door. For joinery, it's all about the "blind-rabbet" joint in the corners to assemble the box, but something as simple as pocket-hole joinery or even tongue and groove would work fine too. Of course you could take a step further and use dovetail joinery or such to spruce it up even more. The only real "decorative" feature on this simple cabinet is the raised panel on the door. Originally I planned to leave it a flat panel, but then I wouldn't have had a chance to free-hand the extra wide chamfer all around the edge with my skew rabbet plane. Regardless of what you do with your small cabinet, this is a quick and easy project perfect for a single-day or leisurely weekend build. Help support the show - please visit our advertisers

553 The Small Pine Cabinet

Over the years there have been a lot of questions from new woodworkers. One of the most frequent is "should I buy a full set of chisels or just one or two?" The easy answer is "YES get a full set" but that's not always the correct one. In fact, if I had to rebuild my entire shop from the ground up and retool it, I'd probably avoid an entire set of chisels and instead concentrate on adding one or two high quality versions as needed. In today's episode I share with you the advice I like to offer new woodworkers (and some experienced ones) when it comes to purchasing chisels. With so many different tool manufacturers, sizes and even specialty chisels to choose from, it's hard to decide where to get started when buying your first (or next) chisel(s). My advice is pretty simple, and it can easily transfer to other tools and accessories in your shop later down the road. Help support the show - please visit our advertisers

552 Chisel Talk "3 chisels to start with"

In the previous episode of this two part series "550 Simple Cabinet Construction Pt 1" we started the construction on a pair of overhead cabinets for a laundry room. The cabinets are about as simple in design and construction as possible. A box with a face frame and a pair of full-overlay doors to enclose them. The only detail that could be remotely described as "ornate" is the ogee profile routed on the rail and stiles of the door frames. As far as I'm concerned the simpler the better when it comes to cabinet design. Why? For two reasons; 1) it makes construction a whole lot easier and more predictable, and 2) an entire wall filled with highly ornate cabinets would actually be it's own kind of special craziness. Help support the show - please visit our advertisers

454 Walnut Buffet Pt 4

Download our free app to listen on your phone