3D Printing Projects

Display live sensor readings on eInk with Marquee, Adafruit’s experimental new no-code interface builder

Check it out on: https://marquee.adafruit-playground.com

Marquee lets you design e-paper interfaces without writing code, storing images, fonts or rendering graphics on the device

Guide: https://adafruit-playground.com/u/brubell/pages/adafruit-marquee

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Shop for parts to build your own DIY projects http://adafru.it/3dprinting

3D Printing Projects Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Connect with Noe and Pedro on Social Media:

Noe's Twitter / Instagram: @ecken

Pedro's Twitter / Instagram: @videopixil

-----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Adafruit Monthly Deals & FREE Specials

https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

-----------------------------------------

Build an off-grid message board. This IoT project listens for messages sent across a LoRa network and displays them on a tri-color e-ink.

Guide: https://learn.adafruit.com/meshfruit-message-board

It features a STEMMA QT sensor that reads CO2, temperature, and humidity

Powered by the Feather ESP32-S3 and an RFM95 LoRa radio, this is a great combo for building a mesh receiver that runs on battery.

The 3D printed case features a kickstand for a desk and magnets to mount to a fridge or any magnetic surface.

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Shop for parts to build your own DIY projects http://adafru.it/3dprinting

3D Printing Projects Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Connect with Noe and Pedro on Social Media:

Noe's Twitter / Instagram: @ecken

Pedro's Twitter / Instagram: @videopixil

-----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Adafruit Monthly Deals & FREE Specials

https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Music by Dan Q https://soundcloud.com/adafruit

Music by Bartlebeats https://soundcloud.com/adafruit

-----------------------------------------

You can build a Minecraft-inspired compass with GPS.

Guide: learn.adafruit.com/minecraft-gps-compass

Inspired by summer camp adventures, this compass saves and loads waypoints so you always know the way back.

The menu lets you pick previously saved locations and points you toward them as you explore outdoors.

Powered by an Adafruit Feather RP2350, this project pairs a mini GPS module with a gyroscope and accelerometer!

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Shop for parts to build your own DIY projects http://adafru.it/3dprinting

3D Printing Projects Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Connect with Noe and Pedro on Social Media:

Noe's Twitter / Instagram: @ecken

Pedro's Twitter / Instagram: @videopixil

-----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Adafruit Monthly Deals & FREE Specials

https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Music by Bartlebeats https://soundcloud.com/adafruit

-----------------------------------------

Build and play a modern version of the iconic 90's hit game, Bop It. Powered by the Feather RP2040 PropMaker running Circuit Python. Tutorial: https://learn.adafruit.com/prop-it-game

Feather RP2040 Propmaker:

https://www.adafruit.com/product/5768

Alpanumeric LED Display:

https://www.adafruit.com/product/2158

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week:

Enderman

By PeWu

makerworld.com/en/models/1952402-minecraft-enderman-model-kit

Bambu X1C

PolyMaker PLA

1hr 17mins

X:130 Y:19 Z:19mm

.2mm layer / .4mm Nozzle

10% Infill / 1mm Retraction

200C / 60C

16g

230mm/s

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------

You can build wearable headbands with neopixel LEDs that respond to BLE beacons at Disney Theme Parks.

Guide: https://learn.adafruit.com/ble-beacon-neopixels

These NeoPixel accessories interact with Disney BLE devices like MagicBands, Starlight bubble wands, and park statues. This means you can use Disney products like the bubble wands to cast colors to our custom NeoPixel projects.

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Shop for parts to build your own DIY projects http://adafru.it/3dprinting

3D Printing Projects Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Connect with Noe and Pedro on Social Media:

Noe's Twitter / Instagram: @ecken

Pedro's Twitter / Instagram: @videopixil

-----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Adafruit Monthly Deals & FREE Specials

https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Music by Dan Q https://soundcloud.com/adafruit

-----------------------------------------

Build a Star Trek inspired prop with LCARS diagnostics, CO2/Humidity/Temperature graphs

Guide: learn.adafruit.com/star-trek-data-dispenser

This unit displays live CO₂, humidity, temperature and battery level as shaped colored bars that match the on-screen prop graphics. When CO₂ levels get too high, a haptic motor buzzes to alert you.

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Shop for parts to build your own DIY projects http://adafru.it/3dprinting

3D Printing Projects Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Connect with Noe and Pedro on Social Media:

Noe's Twitter / Instagram: @ecken

Pedro's Twitter / Instagram: @videopixil

-----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Adafruit Monthly Deals & FREE Specials

https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Music by Dan Q https://soundcloud.com/adafruit

-----------------------------------------

Build a MIDI visualizer with NeoPixel LEDs and the PropMaker Feather RP2040. A 3D printed grid display is inspired by the light billboard from the movie, Close Encounters of the Third Kind. Links ⬇️

CAD files, code and Tutorial:

https://learn.adafruit.com/midi-neopixel-visualizer

Feather RP2040 PropMaker

https://www.adafruit.com/product/5768

NeoPixel Pebble Strand

https://www.adafruit.com/product/6024

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------

Blurry Analog LED matrix clock with animated backgrounds that change throughout the day.

Guide: learn.adafruit.com/blurry-analog-clock

The clock displays hour and minute hands over a flowing gradient background, inspired by blurry LED art gallery sculptures.

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------

Turn your PyPortal into an IoT-connected art gallery that cycles through art, space, cats and dogs! Pull from image feeds or images from an SD card. Skip images with a tilt or shake.

Guide: https://learn.adafruit.com/pyportal-art-display

Tap the screen to change feeds. Customize your feed, transition animations, and even the audio chirp feedback! 3D print the melted diagonal frame to mount the PyPortal and accelerometer.

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Shop for parts to build your own DIY projects http://adafru.it/3dprinting

3D Printing Projects Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:

https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

Connect with Noe and Pedro on Social Media:

Noe's Twitter / Instagram: @ecken

Pedro's Twitter / Instagram: @videopixil

-----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Adafruit Monthly Deals & FREE Specials

https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting

-----------------------------------------