Additive Insight

Additive Insight

By TCT MagazineTechnology
Download on the App Store

All Additive Insight episodes

  • “We’re 100% in on AM” – Align EVP of R&D Srini Kaza on the company’s application of 3D printing
    On this episode of the Additive Insight podcast, TCT Group Content Manager Sam Davies is joined by Srini Kaza, the Executive Vice President of Research & Development at Align Technology.
    Align Technology are not only considered to be the leader in the dental aligner market, but are also highly regarded as a 3D printing super user.
    The company has been utilizing 3D printing to produce aligner moulds for around a quarter of a century, scaling into millions of parts a week.
    Today, Kaza joins the Additive Insight podcast to take us through that journey, detailing the evolutions of the company’s manufacturing workflow, the challenge of requiring 100% yield, and the target of additively manufacturing end use aligners.
    He also offers advice to other manufacturers looking to adopt 3D printing and explains what R&D challenges Align is trying to address next.
    This episode of Additive Insight is sponsored by ASTM International's Additive Manufacturing Center of Excellence. Visit https://amcoe.org/
    39 min
  • #228 DEEP Manufacturing CEO Peter Richards on deploying WAAM for a subsea world first
    For our latest Executive Interview, we're joined by Peter Richards, CEO of DEEP Manufacturing.
    DEEP Manufacturing is a UK-based advanced manufacturing specialist, and a division of DEEP, a company developing next-generation underwater pressure vessels for subsea human habitats.
    The company specialises in the application of wire arc additive manufacturing for complex large-scale structural parts in offshore, defence, maritime, energy, and aviation sectors, and has developed its own six arm robotic additive manufacturing platform - the HexBot.
    On this episode, Peter discusses how the HexBot is pushing the boundaries of metal part production, the crucial role of standards in developing pressure vessels for human occupancy, and delivering a world first for subsea exploration. 
    This episode of Additive Insight is sponsored by ASTM International's Additive Manufacturing Center of Excellence. Visit https://amcoe.org/
    37 min
  • #227 3D printing your career from artist to engineer | Kat Ermant x Brianne Malloy
    In the latest instalment of TCT's Innovators on Innovators series, Kat Ermant, Lead Prototype Technician at Peloton, is joined by Brianne Malloy, Senior 3D Printing Engineer at Estee Lauder.
    Over the past ten years, Kat and Brianne have forged careers in the additive manufacturing sector, working primarily in design, prototyping and product development at Peloton and Estee Lauder, respectively. Their academic backgrounds, however, are in fine art.
    Today, they come together to discuss their journeys from fine art undergraduates to additive manufacturing engineers, touching on how they get the better of imposter syndrome, the importance of networking for career progression, and their pursuit of additional qualifications while in full-time work.
    They also dig into the definition of an engineer and offer advice to graduates and young professionals.
    This episode of Additive Insight is sponsored by ASTM International's Additive Manufacturing Center of Excellence. Visit https://amcoe.org/
    40 min
  • #226 TCT 3Sixty 2025: Insights from the UK home of additive manufacturing
    On this latest edition of Additive Insight, TCT editors Laura Griffiths and Sam Davies reflect on a week of additive manufacturing activity in the UK.
    The week kicked off with the third annual TCT UK User Group, followed by the UK's definitive AM event TCT 3Sixty and the TCT Awards. Listen to hear a round-up of technology debuts from UltiMaker, Pollen AM, Additive Manufacturing Solutions and more, plus conference takeaways from the Ministry of Defence, ASTM International and Breakthrough Sports on how additive manufacturing is creating new production opportunities across industries. Plus, a celebration of this years TCT Awards winners, Hall of Famers and more.
    58 min
  • #225 'From interested party to full time adopter' – Maj Gen Phil Prosser on the MOD’s interest in AM
    On this episode of the Additive Insight podcast, we're joined by Major General Phil Prosser, who has served as a British Army officer and engineer for 33 years.
    In that time, General Prosser has operated primarily across engineering, logistics and supply chain, with tours in Afghanistan, Iraq and Kosovo, and a deployment to support the National Health Service’s Covid-19 effort in 2020.
    Through his current role as Director Joint Support in Defence Support, General Prosser is responsible for, among other things, building out supply chain resilience. This is increasingly bringing him into contact with additive manufacturing technology, with General Prosser joining the Additive Insight podcast to discuss the opportunities for AM in defence.
    Throughout the conversation, we touch on the MOD’s ongoing Project Tampa initiative, the development of digital part inventories, and the use of AM on the front lines.
    30 min
  • #224 'We either innovate or we die.' - Rapid Fusion on its Medusa hybrid manufacturing platform
    On this episode of the Additive Insight podcast, TCT Group Content Manager Sam Davies is hosted by Rapid Fusion Managing Director Jake Hand and CTO Martin Jewell at the company’s offices in Exeter.
    Founded in 2023 by 3D printing distributor Evo3D, Rapid Fusion is developing and commercialising its own large-format additive manufacturing technology.
    Having launched its hybrid Medusa platform earlier this year, Hand and Jewell join the Additive Insight podcast to discuss the industrial opportunities for large-format 3D printing, how its new Medusa system works, and the UK additive manufacturing supply chain.
    They also provide insight on their collaborations with the likes of Rolls Royce and share their vision for the company moving forward.
    59 min
  • #222 3D printing insights from AMUG Conference & RAPID + TCT with Todd Grimm
    On a bonus edition of the Additive Insight podcast, TCT Magazine editors Laura Griffiths and Sam Davies sit down with Todd Grimm to reflect on a jam-packed fortnight in the North America additive manufacturing market. 
    After the AMUG Conference and RAPID + TCT events came to a close, our panel discuss the emergence of Chinese competitors in North America, the key takeaways from AMUG and the most interesting technology on show at RAPID + TCT.
    48 min
  • #221 Caracol CEO Francesco De Stefano on the company's expansion into metal DED 3D printing
    On this episode of the Additive Insight podcast, we’re joined by Caracol co-founder and CEO Francesco DeStefano.
    Though initially set up as an additive manufacturing service bureau, Caracol has evolved to become a provider of large-format additive manufacturing equipment.
    De Stefano joins the podcast to discuss the development of the company’s large-format polymer 3D printing offering, its recent expansion into metal DED technology, and the application opportunities Caracol has opened up along the way.
    We also touch on the challenges is looking to address next and what DeStefano’s vision for the company is moving forward.
    36 min
  • #220 ‘I’ve always been driven by cool technologies.’ – Tuan Tranpham on his 20-year career in AM
    On this episode of the Additive Insight podcast, we're joined by Tuan Tranpham, an additive manufacturing veteran who currently works as the President of Americas and Asia Pacific for Anisoprint.
    Tranpham came into the additive manufacturing industry more than 20 years ago, starting with a sales role at Z Corp and only a beginner’s knowledge of 3D printing.
    Since then, he has gone on to work for the likes of 3D Systems, Arcam and Desktop Metal, selling metal, polymer and composite 3D printing technologies and becoming the most followed AM professional on LinkedIn.
    Joining the Additive Insight podcast, Tranpham shares his thoughts on the progression of additive technology, how machine OEMs should handle application development, and what attracted him to his latest role at Anisoprint.
    We also discuss his time at Desktop Metal, and touch on what else he wants to achieve in his career.
    58 min