Flares detected in ALMA single-dish images of the Sun by I. Skokić et al. on Wednesday 30 November

The (sub)millimeter radiation of solar flares is poorly understood. Without

spatial resolution, it cannot be compared easily to flare emissions in other

wavelengths. The Atacama Large Millimeter-submillimeter Array (ALMA) offers

sufficient resolution for the first time. However, used as an interferometer,

its field of view is smaller than an active region and ALMA cannot observe on

demand when a flare occurs. We use readily available large scale single-dish

ALMA observations of solar millimeter flares and compare them to well-known

features observed in other wavelengths. The properties of these other flare

emissions, correlating in space and time, may then be used to interpret the

millimeter brightenings and vice versa. The aim is to obtain reliable

associations, limited by the time and space resolution of single-dish

observations. We collected ALMA observations at 3 mm and 1 mm and searched for

millimeter brightenings during times given in a flare catalog. We found five

events with 9 or more images that can be used for comparison in time and space.

The millimeter brightenings are associated with a variety of flare features in

cool (H$\alpha$, 30.4 nm), intermediate (17.1 nm), and hot (9.4 nm) lines. In

several cases, the millimeter brightening peaked at the footpoint of a hot

flare loop. In other cases the peak coincided with the top or footpoint of an

active H{\alpha} filament. We found correlations also with post-flare loops and

tops of a hot loop, and in some cases to no features at all. The wide field of

view provided by the single-dish observations allowed for completely

overviewing the flare activity in millimeter waves for the first time. The

associated phenomena often changed during the flare in type and location, and

may explain the sometimes bewildering behavior of millimeter flare emissions

observed previously without spatial resolution.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16935v1

Effects of the Central Mass Concentration on Bar Formation in Disk Galaxies by Dajeong Jang et al. on Wednesday 30 November

While bars are common in disk galaxies, their formation conditions are not

well understood. We use $N$-body simulations to study bar formation and

evolution in isolated galaxies consisting of a stellar disk, a classical bulge,

and a dark halo. We consider 24 galaxy models that are similar to the Milky Way

but differ in the mass and compactness of the classical bulge and halo

concentration. We find that the bar formation requires

$(Q_{T,\text{min}}/1.2)^2 + (\text{CMC}/0.05)^2\lesssim 1$, where

$Q_{T,\text{min}}$ and CMC refers to the minimum value of the Toomre stability

parameter and the central mass concentration, respectively. Bars tend to be

stronger, longer, and rotate slower in galaxies with a less massive and less

compact bulge and halo. All bars formed in our models correspond to slow bars.

A model with the bulge mass of $\sim10$--$20$\% of the disk under a

concentrated halo produces a bar similar to the Milky-Way bar. We discuss our

findings in relation to other bar formation criteria suggested by previous

studies.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16816v1

Determination of 1929 Asteroid Rotation Periods from WISE Data by Adrian L. H. Lam et al. on Wednesday 30 November

We used 22 $\mu$m (W4) Wide-field Infrared Survey Explorer (WISE)

observations of 4420 asteroids to analyze lightcurves and determined spin

period estimates for 1929 asteroids. We fit second-order Fourier models at a

large number of trial frequencies to the W4 data and analyzed the resulting

periodograms. We initially excluded rotational frequencies exceeding 7.57

rotations per day (P < 3.17 hr), which are not sampled adequately by WISE, and

periods that exceed twice the WISE observation interval, which is typically 36

hr. Three solutions accurately capture the vast majority of the rotational

frequencies in our sample: the best-fit frequency and its mirrors around 3.78

and 7.57 rotations per day. By comparing our solutions to a high-quality

control group of 752 asteroid spin periods, we found that one of our solutions

is accurate (within 5%) in 88% of the cases. The best-fit, secondary, and

tertiary solutions are accurate in 55%, 27%, and 6% of the cases, respectively.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16409v1

A Bayesian approach for torque modelling of BeXRB pulsars with application to super-Eddington accretors by A. S. Karaferias et al. on Wednesday 30 November

In this study we present a method to estimate posterior distributions for

standard accretion torque model parameters and binary orbital parameters for

X-ray binaries using a nested sampling algorithm for Bayesian Parameter

Estimation. We study the spin evolution of two Be X-ray binary systems in the

Magellanic Clouds, RX J0520.5-6932 and RX J0209-7427, during major outbursts,

in which they surpassed the Eddington-limit. Moreover, we apply our method to

the recently discovered Swift J0243.6+6124; the only known Galactic pulsating

ultra-luminous X-ray source. This is an excellent candidate for studying the

disc evolution at super-Eddington accretion rates, for its luminosity span

several orders of magnitude during its outburst, with a maximum $L_{\rm X}$

that exceeded the Eddington limit by a factor of $\sim 10$. Our method, when

applied to RX J0520.5-6932 and RX J0209-7427, is able to identify the more

favourable torque model for each system, while yielding meaningful ranges for

the NS and orbital parameters. Our analysis for Swift J0243.6+6124 illustrates

that, contrary to the standard torque model predictions, the magnetospheric

radius and the Alfv\'en radius are not proportional to each other when

surpassing the Eddington limit. Reported distance estimates of this source

range between 5 and 7 kpc. Smaller distances require non-typical neutron star

properties (i.e. mass and radius) and possibly lower radiative efficiency of

the accretion column.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16079v1

Gravity in the Local Universe : density and velocity fields using CosmicFlows-4 by H. M. Courtois et al. on Wednesday 30 November

This article publicly releases three-dimensional reconstructions of the local

Universe gravitational field below z=0.8 that were computed using the full

catalogue CosmicFlows-4 of 56,000 galaxy distances and its sub-sample of 1,008

type Ia supernovae distances. The article also provides some first CF4

measurements of the growth rate of structure using the pairwise correlation of

peculiar velocities fsigma8 = 0.44(+/-0.01) and of the bulk flow in the Local

Universe of 200+/-88 kms-1 at distance 300 h-1Mpc.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16390v1

Exoplanet Detection by Machine Learning with Data Augmentation by Koray Aydoğan. on Wednesday 30 November

It has recently been demonstrated that deep learning has significant

potential to automate parts of the exoplanet detection pipeline using light

curve data from satellites such as Kepler \cite{borucki2010kepler}

\cite{koch2010kepler} and NASA's Transiting Exoplanet Survey Satellite (TESS)

\cite{ricker2010transiting}. Unfortunately, the smallness of the available

datasets makes it difficult to realize the level of performance one expects

from powerful network architectures.

In this paper, we investigate the use of data augmentation techniques on

light curve data from to train neural networks to identify exoplanets. The

augmentation techniques used are of two classes: Simple (e.g. additive noise

augmentation) and learning-based (e.g. first training a GAN

\cite{goodfellow2020generative} to generate new examples). We demonstrate that

data augmentation has a potential to improve model performance for the

exoplanet detection problem, and recommend the use of augmentation based on

generative models as more data becomes available.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15577v1

Palatini formulation for gauge theory: implications for slow-roll inflation by Syksy Rasanen et al. on Wednesday 30 November

We consider a formulation of gauge field theory where the gauge field

$A_\alpha$ and the field strength $F_{\alpha\beta}$ are independent variables,

as in the Palatini formulation of gravity. For the simplest gauge field action,

this is known to be equivalent to the usual formulation. We add non-minimal

couplings between $F_{\alpha\beta}$ and a scalar field, solve for

$F_{\alpha\beta}$ and insert it back into the action. This leads to modified

gauge field and scalar field terms. We consider slow-roll inflation and show

that because of the modifications to the scalar sector, adding higher order

terms to the inflaton potential does not spoil its flatness, unlike in the

usual case. Instead they make the effective potential closer to quadratic. The

modifications also solve the problem that Higgs inflation in the Palatini

formulation is sensitive to higher order terms.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15584v1

Observational studies of high-mass star formation by Igor I. Zinchenko. on Wednesday 30 November

We present a review of observational studies of high-mass star formation,

based mainly on our own research. It includes surveys of high-mass star-forming

regions in various molecular lines and in continuum, investigations of

filamentary infrared dark clouds, which represent the earliest phases of

massive star formation, detailed studies of individual high-mass star-forming

regions, dense cores and disks harboring massive (proto)stars, and associated

outflows. Chemistry in these regions is discussed, too.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.15586v1

Line-of-sight effects in strong gravitational lensing by Pierre Fleury et al. on Wednesday 30 November

While most strong-gravitational-lensing systems may be roughly modelled by a

single massive object between the source and the observer, in the details all

the structures near the light path contribute to the observed images. These

additional contributions, known as line-of-sight effects, are non-negligible in

practice. This article proposes a new theoretical framework to model the

line-of-sight effects, together with very promising applications at the

interface of weak and strong lensing. Our approach relies on the dominant-lens

approximation, where one deflector is treated as the main lens while the others

are treated as perturbations. The resulting framework is technically simpler to

handle than the multi-plane lensing formalism, while allowing one to

consistently model any sub-critical perturbation. In particular, it is not

limited to the usual external-convergence and external-shear parameterisation.

As a first application, we identify a specific notion of line-of-sight shear

that is not degenerate with the ellipticity of the main lens, and which could

thus be extracted from strong-lensing images. This result supports and improves

the recent proposal that Einstein rings might be powerful probes of cosmic

shear. As a second application, we investigate the distortions of

strong-lensing critical curves under line-of-sight effects, and more

particularly their correlations across the sky. We find that such correlations

may be used to probe, not only the large-scale structure of the Universe, but

also the dark-matter halo profiles of strong lenses. This last possibility

would be a key asset to improve the accuracy of the measurement of the

Hubble-Lema\^itre constant via time-delay cosmography.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2104.08883v5

Determination of 1929 Asteroid Rotation Periods from WISE Data by Adrian L. H. Lam et al. on Wednesday 30 November

We used 22 $\mu$m (W4) Wide-field Infrared Survey Explorer (WISE)

observations of 4420 asteroids to analyze lightcurves and determined spin

period estimates for 1929 asteroids. We fit second-order Fourier models at a

large number of trial frequencies to the W4 data and analyzed the resulting

periodograms. We initially excluded rotational frequencies exceeding 7.57

rotations per day (P < 3.17 hr), which are not sampled adequately by WISE, and

periods that exceed twice the WISE observation interval, which is typically 36

hr. Three solutions accurately capture the vast majority of the rotational

frequencies in our sample: the best-fit frequency and its mirrors around 3.78

and 7.57 rotations per day. By comparing our solutions to a high-quality

control group of 752 asteroid spin periods, we found that one of our solutions

is accurate (within 5%) in 88% of the cases. The best-fit, secondary, and

tertiary solutions are accurate in 55%, 27%, and 6% of the cases, respectively.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.16409v1