@AuManufacturing Conversations

@AuManufacturing Conversations

By @AuManufacturingBusinessEntrepreneurship
Download on the App Store

@AuManufacturing Conversations episodes

  • Episode 66 -- Meriel Chamberlin from Full Circle Fibres

    Send us Fan Mail

    In this episode of @AuManufacturing Conversations with Brent Balinski, we hear from Meriel Chamberlin, Founder & Creator at Full Circle Fibres, a textile scientist who has worked at many different points within the industry's supply chain over almost three decades. She tells us the difficulty of going from test tube to tonnes in R&D, why we need to pay more attention to the doers rather than the ticket clippers when it comes to the circular economy, how Australia is focussed on developing the sovereign capability to kill but not to care, and more.

    Episode guide

    0:40 – “Yes, we still can make textiles in Australia, although we do have to do one stage overseas…”
    1:40 – The work of a textile scientist is everywhere, but rarely considered.2:50 – Technically creative people “exist in all sorts of industries.”
    5:10 – The twin problems tied to textile-making around the world: waste and slavery. “And the thing that’s really heartbreaking is… none of that’s necessary.”
    7:34 – TCF “a bureaucratic term” particular to Australia.
    8:20 – Textiles and related industries are huge in Australia, “but we don’t connect the dots.”
    11:40 – Assumptions to do with a soft product and the engineering behind it.
    12:40 – Mud to Marle. A project based on systems innovation.
    15:25 – Using already-available, scalable technology with an end in mind rather than blue sky research.
    17:20 – A 12-month project. Currently selecting colours for pilot batches.
    18:06 – The “test tube to tonne” stage in R&D and why bridging this is so important for commercialisation.
    19:40 – Some thoughts about scaling, and the issue in circular economy efforts: not enough doers and too many ticket-clippers.
    21:15 – There is no remanufacturing without manufacturing. It is critical that existing manufacturers be brought along, because they have the expertise.
    22:10 – “We’ve got all this support for research in the circular economy, but we’ll let the manufacturers just die a death of a thousand cuts… It’s like we need to graft the circular economy onto the shrubs and trees of manufacturing. To grow something from seed is so much harder.”
    23:10 – Some attitudes that are holding us back.
    25:10 – Some of the advisors and experts concerned with innovation in this country should probably be replaced.
    26:40 – We can downcycle, but don’t have the ability to do textile-to-textile recycling here. What would it take to fix this? About $3 million and 2,000 square metres.
    29:15 – Ending up in a funny no-man’s-land for attracting investment. “This is not a VC-type investment”.
    31 – “We can’t make a sandbag or a tarp from scratch in this country.” Why we are “frighteningly at risk” for a lot of essential supply chains.

    Relevant links

    Full Circle Fibres' website.

    Onshore textile manufacturing project among Country Road Climate Fund grant winners

    Healthcare PPE, standard protocols and contingency planning: How do we flatten the curve of demand for PPE as we flatten the curve of infection rates?



    34 min
  • Episode 65 -- Keith Milne from Uncle Harry's Vegan Grill

    Send us Fan Mail

    In this episode of @AuManufacturing Conversations with Brent Balinski,  we hear from Keith Milne, the owner and director of Uncle Harry's Vegan Grill.

    Milne bought the business in 2018 at the age of 70, and has no plans to retire soon. He tells us about what made him buy a struggling vegan food business, what he did after that, what he hates about a lot of the vegan/vegetarian products he sees in supermarkets, and the positives of running a business at his age.

    Episode guide

    0:18 – All ready to retire, but then…

    2:50 – background in education, hospitality, and consulting. Bought the company in 2018.

    3:38 – Didn’t want to waste away watching daytime television and saw an opportunity in vegan food.

    5:02 – Chef background translates well to manufacturing.

    6:32 – Finding a point of difference in the crowded plant-based food market.

    9:48 – The pluses and minuses of running a business in your 70s.

    11:20 – The role of staying physically active.

    12:45 – Nobody is looking out for smaller manufacturing businesses, believes Milne.

    Relevant links

    https://uncleharrys.com.au/






    15 min
  • Episode 64 -- Malcolm Rigby from Open Welding

    Send us Fan Mail

    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode we hear from Richard Simpson, Managing Director at Furnace Engineering, a maker of custom furnaces and ovens.

    Simpson tells us about the history of the Notting Hill, Melbourne-based business, which his father began in 1968, the role of confidentiality in projects, and how it approaches innovation.

    Episode guide

    1:15 – What Open Welding does – capturing and analysing welding sounds to understand weld quality.

    2:14 – About Rigby’s career, starting as a plumber, and how it led to a key insight.

    4:05 – “Surely there must be a way we can automate this.”

    5:02 – Years and years of observation.

    5:50 – A literature review. “I had no idea people had been investigating this for almost 80 years.”

    7:37 – The ARC committee and the encouraging feedback from the panel. 

    10:20 – A critique of the university and working with them.

    11:40 – How it’s done. 

    13:10 – Covid puts a black cloud over everything, with product development not finished.

    14:20 – developing a new product associated with compliance and ISO 3834.

    16:10 – the need and the challenge to focus and not dilute their message. 

    17:50 – “We can make anyone a welder in three days if they pass the aptitude test.” The problem is bodies, though.

    19:10 – Lessons from the skills shortage in WWII and how it was met.

    21:30 – Rigby’s opinion on what’s wrong with innovation initiatives.

    23:10 – “Everyone wants to look at stuff that’s sexy. But the problem is, if you don’t get the basics and the foundation right, it doesn’t matter about the sexy stuff. Because you’ve still got to build a launchpad. You’ve still got to build a ship. You’ve still got to build a bridge.”

    26:32 – Innovation hubs at universities and the gap between them and private businesses.

    28:30 – The importance of having a broader mission behind what you’re doing.

    Relevant links

    Open Welding's website

    Lessons from Australia’s most innovative manufacturers

    Nominations flood in for Australia’s 50 most innovative manufacturers campaign



    32 min
  • Episode 63 -- Richard Simpson from Furnace Engineering

    Send us Fan Mail

    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode we hear from Richard Simpson, Managing Director at Furnace Engineering, a maker of custom furnaces and ovens.

    Simpson tells us about the history of the Notting Hill, Melbourne-based business, which his father began in 1968, the role of confidentiality in projects, and how it approaches innovation.

    Episode guide

    1:17 – An introduction to Furnace Engineering and what it makes.

    1:50 – A history going back to the late-1960s and Simpson’s father.

    2:30 – Simpson begins his career as an engineer at Ford, before starting at Furnace and later taking over the business from his father in 2000. Diversifying the company away from the automotive industry and from a licencing model.

    4:44 – The difference between an oven and a furnace.

    5:18 – “Every piece of equipment is customised.”

    6:20 – The importance of export sales, which began in the 1990s with the aluminium industry.

    8:48 – The makeup of the company, which employs between 60 and 80 depending on demand.

    10:27 – The importance of performing stimulating projects and being discreet about them. “Culturally we’re very, very comfortable with the idea that we need to respect people’s confidentiality. And if we jump out there and [are] willing to talk about everyone’s processes, whether they’ve given us permission or not, it’s probably not culturally aligned with what a lot of our customers would expect.”

    13:24 – Furnace’s role in the emergence of a carbon fibre industry in Australia, particularly around Deakin University.

    15:30 – Continuing with carbon fibre and its role in manufacturing locally.

    17:32 – How innovation is understood and pursued at the company: novel solutions plus an appropriate amount of stretching.

    18:48 – Continuing with the right amount of stretching.

    20:39 – An important recent project with Deakin on a new, more energy-efficient process for making carbon fibre. A two-stage prototyping process, “a really interesting exercise” and a new patent for the team.

    24:03 – One of the problem areas regarding collaboration with research institutions.

    24:52 – There’s a lot of lip-service paid to the importance of manufacturing by governments.

    Relevant links

    Furnace Engineering's website
    https://www.furnace.com.au

    Lessons from Australia’s most innovative manufacturers

    Nominations flood in for Australia’s 50 most innovative manufacturers campaign



     


    28 min
  • Episode 62 -- Dr Munib Karavdic and Thomas Kerr from WAVE Design

    Send us Fan Mail

    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode we hear from Dr Munib Karavdic and Thomas Kerr, CEO and Design Lead respectively at WAVE Design.

    Karavdic and Kerr tell us about avoiding the spectacle and focussing on the reality of innovation, getting from idea to implementation, why customer case should come before business case, and much more.

    Episode guide

    1:30 – introduction to guests

    3:58 – What WAVE Design does – “our main focus is on helping established organisations to navigate innovation and leverage human-centred design as a way of delivering outcomes for customers and clients.”

    5:46 – How they understand innovation. And why it needs discipline and structure, a focus on human needs and desires, and not spectacle.

    8:08 – How you put a human at the centre.

    9:34 – Establishing a customer case before you establish a business case.

    10:58 – Why you need to keep learning, experimenting, and even failing. “If you haven’t done anything wrong, you actually didn’t learn.”

    12:10 – Knowers versus learners.

    13:30 – Organisational knowledge increases, but your connection with end users might not be keeping pace.

    14:32 – A story about leaps of faith versus leaps of logic and the importance of validating assumptions.

    16:10 – Avoiding “nice landing, wrong airport.”

    19:55 – Taking an organisation’s culture from using innovation tools to having an innovation mindset. And why it’s not as hard as it sounds.

    22:45 – An example of investing time understanding the problem and why it mattered at a pharmaceutical company and the longer-term results in culture.

    24:30 – A few thoughts about lifting innovation among the nation’s manufacturers, concerning scale, culture, government support and IP.

    28:10 – Some closing comments about what leaders need to know about innovation.  


    Relevant links

    WAVE Design's website
    http://www.wave.design

    Lessons from Australia’s most innovative manufacturers

    Nominations flood in for Australia’s 50 most innovative manufacturers campaign






     

    32 min
  • Episode 61 -- Paul Riley from Samsara Eco

    Send us Fan Mail

    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode, We hear from Paul Riley, CEO and founder of Samsara Eco. He tells us about how Samsara's enzyme-based technology works, how the company innovates, why the nation needs to reverse the hollowing out of its plastics industry, and more.


    Episode guide

    1:20 – An introduction to Riley and Samsara.

    3:25 – The approach has always been with a view to handling a mixed bale of plastic.

    4:04 – Enzymatic depolymerisation explained, and its genesis in a discovery in Japan. “The enzyme is like a little Pac-Man.

    5:48 - Displacing fossil fuels by harvesting monomers from waste plastic.

    7:10 – Enzymes that are designed by computer and new to nature. They can currently handle five types of plastic.

    8:58 – How it addresses some of the challenges in scaling up.

    10:03 – The only waste that comes out of the process.

    11:05 – The low carbon footprint of the process and why this is commercially beneficial.

    12:38 – The enzymes like to operate in a temperature range of 45 - 55 degree range and can produce monomers in an hour.

    13:20 – The plastic is never melted, which is “fundamentally different” to other recycling approaches.

    14:28 – How the enzymes are designed, developed and grown.

    15:35 – The timing of their Series A raise and the downturn in venture investment.

    16:55 – Why circular plastics hubs are needed and who would be involved.

    18:55 – Australia lacks polymer processing capacity, and this presents “enormous sovereign risk.” 

    20:06 – Innovation and what it means at Samsara.

    23:30 – One company is only one part of the solution. Things like redesigning are very important.

    25:20 – Why we need to reverse the long-term offshoring trend.


    Relevant links

    Samsara's website
    https://www.samsaraeco.com/

    We are trying to identify Australia’s 50 most innovative manufacturers. Nominate now

    Samsara’s designer enzymes to turn old plastics into new sportswear

    “Infinite recycling” startup Samsara raises $54 million in Series A

    Digesting the issue: Woolies-backed startup prepares to set its enzymes on our waste plastic

    Samsara aims for infinitely recyclable plastics

    Lessons from Australia’s most innovative manufacturers

    28 min
  • Episode 60 -- Simon McKean from XFrame

    Send us Fan Mail

    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode, we hear from Simon McKean, CFO of XFrame, a company based on a novel framing system for construction projects, and which hopes to enable a more circular building industry. McKean tells us about the company’s story so far, an emphasis on distributed production, looking towards large-scale residential projects, and more.

    Episode guide

    1:18 – The background. Five years in.

    3:10 – Clients so far. Almost 20 installations at ANZ bank sites in Australia. Presence at Tonsley in Adelaide and New Zealand where the company was founded.

    4:30 – The problem – construction industry waste – that inspired PhD student Ged Finch to develop XFrame.

    7:05 – The outsourcing model and how it works. Partnership with Bedford Group.

    8:30 – International customers.

    11:14 – Going from drawing to tender. Plus the bits that aren’t automated in this.

    13:10 – Construction, fitouts and furniture. The current work on roof trusses.

    15:44 – The innovation question. What it means at XFrame and what problems drive it.

    18:14 – Expanding on roof trusses.

    20:50 – International growth.

    Relevant links

    XFrame's website
    https://xframe.com.au/

    TONSLEY COMPANIES FOCUS ON INTERNATIONAL MARKETS

    CEFC COMMITS $75 MILLION IN FINANCE FOR PINKENBA RECYCLING FACTORY

    AUSTRALIA NEEDS CONSTRUCTION WASTE RECYCLING PLANTS — BUT LOCALS FIRST NEED TO BE WON OVER

    NEW $18 MILLION CENTRE FOR TRANSFORMING CONSTRUCTION WASTE ANNOUNCED




    23 min
  • Episode 59 -- Mark Croudace from MGA Thermal

    Send us Fan Mail


    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode, we hear from Mark Croudace of MGA Thermal. He tells us about their upcoming onsite demonstrator project, their approach to innovation, a new partnership with knode on Western Australia’s energy shift, and more.

    Relevant links

    MGA Thermal's website
    https://www.mgathermal.com/

    MGA THERMAL’S PILOT PROJECT AWARDED $560,000 BACKING FROM SHELL

    @AUMANUFACTURING CONVERSATIONS EPISODE 13 — ARDEN JARRETT FROM MGA THERMAL

    MGA THERMAL AWARDED $1.27 MILLION BY ARENA TO BUILD DEMONSTRATOR FACILITY



    21 min
  • Episode 58 -- Dario Valenza from Carbonix

    Send us Fan Mail

    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode, we hear from Dario Valenza from UAV builder Carbonix, which has its origins in Valenza's time working with composites on America's Cup racing teams.

    Episode guide

    1:16 – Origin story. 

    2:25 – Background in America’s Cup racing and why that’s important.

    3:15 – Why linear infrastructure has become the priority. 

    5:10 – Relationship with Quickstep, and why they are a good fit as a contract manufacturer as volumes increase.

    6:50 – The types of skills present at the company. 

    8:16 – Innovation at Carbonix. “The short version is innovation is really about questioning the parameters and testing and finding out whether your theories are correct or not.”

    10:30 – The new airframe developed in response to a need for improved climb rates and remote communications. 

    11:40 – Moving to understand and answer customer considerations e.g. power lines, and then juggling engineering and design tradeoffs.

    12:57 – The mission – operating drones at scale and how this is acted on.

    13:40 – Hydrogen electric propulsion and drones, and why Carbonix is partnering with H3 Dynamics on this.

    15:40 – Which industries UAVs will change, and the appeal of “remote one to many” applications. 

    18:20 – “There’s a tendency to undervalue manufacturing” and what this leads to. And why there are signs this is changing.

    19:38 – Attracting and developing talent.

    Relevant links

    Carbonix's website
    https://carbonix.com.au

    QUICKSTEP SIGNS $1.5 M DEAL TO MANUFACTURE FOR DRONE DELIVERY COMPANY

    CARBONIX BOOSTS DRONE PRODUCTION WITH QUICKSTEP ORDER

    CARBONIX AND H3 DYNAMICS TO DEVELOP HYDROGEN-ELECTRIC DRONE

    CARBONIX TO SUPPLY DRONES TO FUGRO

    CARBONIX DRONES MONITOR REMOTE POWER LINES

    CARBONIX BACKS DRONE OPERATION ROADMAP






     




    21 min
  • Episode 57 -- Ian Lowrey from Wireman

    Send us Fan Mail

    Welcome to this special episode of @AuManufacturing Conversations with Brent Balinski, one which we're running as part of our quest to identify Australia’s 50 Most Innovative Manufacturers.

    Australia’s 50 Most Innovative Manufacturers is a new campaign by @AuManufacturing. It has been made possible by the generous support of  MYOB, SMC Corporation Australia, and Bosch Australia Manufacturing Solutions. Be sure to check our website and social media channels for regular updates, including profiles of nominees and other information.

    In this episode, Ian Lowrey, Director at Wireman, tells us about trying to contribute simple though meaningful innovations to the fencing industry, a place where a lot of products "haven’t really been looked at in any great detail for well over 100 years."

    Episode guide

    1:12 – An introduction to Wireman and Ian Lowrey, a product designer who was introduced to the problems of wire fencing by his patent attorney.

    2:20 – Started looking at barbed wire and the challenges faced by contractors. Invented the DeBarber.

    3:10 – Everyone wanted better wire grippers, so they developed these.

    4:14 – The issues with torsion springs.

    6:18 – Fencing is a dangerous thing. 

    6:45 – Adoption of 3D printing at the business. Printing in aluminium has been “quite a big deal.” 

    7:20 – The main considerations in product development

    8:30 – How they understand innovation and what they rule in and out when product ideas are considered.

    10:35 – How product testing and customer feedback influence Wireman. 

    12 – A mixture of contract and in-house production. 

    13:30 – How wire grippers have been a good “gateway product”.

    15:25 – Why there’s been a deliberate effort to make smaller-sized equipment.

    16:55 – A boost from being featured on the Farm Learning with Tim Thompson Youtube program, and why Youtube is an important medium for people in the bush.

    18:40 – “A lot of room to move” in their sector, though there are challenges to having their products adopted.

    19:55 – Issues around IP for manufacturers trying to scale up.

    Relevant links

    Wireman's website
    https://wireman.com.au/

    WE ARE TRYING TO IDENTIFY AUSTRALIA’S 50 MOST INNOVATIVE MANUFACTURERS. NOMINATE NOW






    21 min

About @AuManufacturing Conversations

From the publisher's feed

@AuManufacturing Conversations is a regular interview program hosted by Brent Balinski (with other hosts occasionally) bringing you discussions with the folks who are contributing to a critical…