Brians Questions:

I hear a lot of talk on forums and social media about buying smaller tools to make more room in your shop. I can see how something like a 52 inch rip fence will take up more room but in my little pea brain it takes as much room to plane and joint a 4 foot board on a 72 inch bed jointer and a 15 inch planer and it does a 46 inch bed jointer and a lunch box planer. Am I wrong? Should I take this into consideration when buying tools? I'm fortunate to have a 1000 sqft shop so space isn't necessarily at a premium but I'll also be shop building large built in closets and wine rooms and such so it may get tighter than I think. Thanks for all the info and keep it up. Michael

I know how to sand through the grits. And I know why to sand through the grits. But how long (in general) should you stay at each grit? Obviously higher grits are easy. I usually stay there until any major imperfections are smoothed out. But as I progress, I’m always thinking I should stay there for one more round. Especially at my final grit. Normally I just keep going until the piece “feels” nice and smooth and flat. So far that’s worked for me. I’m sure I’m overthinking it, but figured I’d ask the experts what they do. I’m using an Orbital sander by the way. Sorry for the long winded question, you obviously don’t have to read all that. I ramble haha. Thanks so much. Mick at Broken Levee Woodworks

Guys Questions:

Hey guys and Guy. I’m building a dining table for a friend out of walnut and quarter sawn WO and am starting to think about applying finish. I’m wondering about applying a couple of coats of shellac to deepen the grain and following up with water based poly for the top coat(s). After hearing Guy tout the water based conversion varnish, I’m considering the General Finishes product that has the catalyst you have to mix in. Is that what you use Guy? As far as the shellac, is that a bad idea? I don’t feel confident getting an even coat, especially on the top, using a hand application so I would like to spray. Does that sound feasible? I also don’t want to change the color, jus deepen the grain so what flavor of shellac and cut should I use? Enjoy you guys a lot. My favorite woodworking podcast. Tom Bigmuddy Woodworks

Hey fellas, I have a question about the Domino 500 and 700. What rule(s) of thumb do you use for when to use the 700 instead of the 500 when it's not an obvious situation? Other than the 3rd's of the stock thickness. Thanks for all of your different points of view on how to tackle situations we find ourselves in. Matt in AL

Huy's Questions:

Where do you find the most objective tool reviews? Have a great day Chuck

Alabama ww said he has done half blind dovetails where you cut thru dovetails and add an 1/8 piece on the front. Could you expand on your process for doing this specifically adding the false front and getting it flush to sub front sides. Thank you, Schatz