Climbing and Rigging

Climbing and Rigging

By International Society of Arboriculture
Download on the App Store

Climbing and Rigging episodes

  • Valdôtain Tresse (VT)
    Learn how to tie the most common variation of the “French Prusiks”, the Valdôtain tresse. The Valdôtain tresse is a knot that holds securely and releases very easily. View this video to see how it grabs a hold of the rope without even tying a knot in the line!
    0 min
  • Half Hitch and Running Bowline
    Learn how to use these knots for butt-hitching sections of a tree. The half hitch shares the load and makes it is easier to remove the piece. Watch this episode of Climbing and Rigging to find out how to tie this combination!
    0 min
  • Clove Hitch and Marline Hitch
    Climbers often tie either a marline hitch or a half hitch in addition to the primary rigging knot on a piece being cut. The purpose is to reduce the chances of the primary knot slipping off the piece and to create a more favorable bend ratio in the line before the primary knot. The clove hitch can be used to send equipment up to the climber as a midline knot, or as an endline knot, when backed up with half hitches, to tie off limbs or sections of wood. Watch this month’s Climbing and Rigging episode to learn how to use them together!
    0 min
  • Zeppelin Bend
    The zeppelin bend can be used to attach two lines together for a line that will be heavily loaded. It is a symmetrical knot that is easy to untie even after loading. Find out how this easy knot carries heavy loads in this episode of Climbing and Rigging! This CEU quiz covers material from the following Climbing and Rigging episodes: Sheet Bend, Slip Knot, Cow Hitch, Timber Hitch, and Zeppelin Bend. Be sure to watch the podcast and follow our experts as they show you the proper way to tie these knots, and teach you the advantages and limitations associated with the different knots. .5 CEU (A,U,M,T,L,Bp)
    0 min
  • Sheet Bend
    Do you know how to join two ropes of different diameters using a sheet bend? The sheet bend is most easily remembered as a bowline tied with two separate lines. In this episode of Climbing & Rigging, we’ll show how you can join two ropes using a sheet bend or a slippery bend. The slippery bend is easy to untie and can be instantly spilled by pulling out the bight, but it’s suitable only for passing ropes to the climber. See in the video how these bends are tied!
    0 min
  • Slip Knot
    You can tie this knot even with one hand! In addition to being very easy to tie, experienced climbers find many used for this directional knot. This knot is asymmetric, and it will slip if pulled from the part of the rope used to create the bight (in this instance, the working end). Keep in mind that this directional dependence is important in some applications of this knot.
    0 min
  • Cow Hitch
    A cow hitch is used for securing hardware to a tree and it is a variation on the girth hitch where it is formed with a line instead of a loop. Did you know that the direction of this half hitch should be against the bight, so that the working end exits back along the direction it entered? Learn some important features about this hitch in this episode of Climbing & Rigging.
    0 min
  • Timber Hitch
    A timber hitch can be used for securing hardware to a tree using an eye sling. This directionally dependent hitch is commonly used when the eye sling is too short to create a cow hitch. This hitch must be secured and set properly to maintain integrity. Learn some important features about this hitch in this episode of Climbing & Rigging.
    0 min
  • French Prusik Hitches
    There are many knot variations in the family of “French Prusiks.” These friction hitches can be tied with a variety of rope diameters and constructions and are used in both rigging and climbing operations. In this video we highlight the Valdôtain tresse (Vt) and the Machard tresse (Mt). Learn the advantages and limitations of these hitches.
    0 min
  • Klemheist
    This hitch is often used as an alternative to a Prusik hitch, and is tied with a Prusik loop. It can be used on doubled rope for footlock ascent. One of the advantages of this hitch is that it can be easily tied and untied when using an endless loop of smaller-diameter cordage.
    0 min

About Climbing and Rigging

From the publisher's feed

This ArborPod™ series offers videos that can help an arborist identify parts of a line; select and use the appropriate knots; and learn about other equipment, resources, and techniques valuable in a variety of climbing and rigging scenarios.