Climbing and Rigging

Climbing and Rigging

By International Society of Arboriculture
Download on the App Store

Climbing and Rigging episodes

  • Top Removal with an Arborist Block pt 1
    Rip Tompkins demonstrates taking the top out of a tree using an arborist’s block rigged below the cut. In this first part he sets up the rigging paying particular attention to a safe descent of the large piece once it’s cut, and safety for the climber.
    4 min
  • Natural-Crotch Rigging Tips
    Sometimes all you need is a rope, as long as you rig it properly. Ken Palmer walks us through two natural-crotch rigging scenarios where getting it right can mean the difference between success and potential failure.
    0 min
  • Forces in Top Removal
    Topping a tree can be one of the most dangerous jobs an arborist can do. Ken Palmer and Rip Tompkins walk you through the forces at play, and tips on mitigating those forces, when topping. The accompanying quiz covers the episodes Rigging Force Experiments parts 1 and 2, Dynamometer Drop Tests parts 1 and 2, Work Positioning When Topping, and Forces in Top Removal (A,T,Bp)
    0 min
  • Work Positioning When Topping
    Blocking out the stem once a tree has been limbed out puts the arborists in a precarious position, the climber needs to be close enough to safely make the cut, but runs the risk of the reaction forces from dropping a large piece of wood flipping the lanyard and climbing line off the end of the stem. Rip demonstrates techniques to secure yourself before making the cut, and how to set up your climbing line as an emergency life line.
    0 min
  • Dynamometer Drop Tests part 2
    Ken and Rip intentionally create a worse case rigging scenario to test the forces ropes and equipment can be subjected to in the second part of the Dynamometer drop tests.
    0 min
  • Dynamometer Drop Tests part 1
    Ken and Rip demonstrate the dramatic amount of force created when dropping large pieces into a rigging system. Using dynamometers to measure at both the anchor point and at the in tree rigging point.
    0 min
  • Rigging Force Experiements-part 2
    Peter Donzelli explains the many variables that go into the amount of force a rigging system is subjected to on the job, and how understanding these variables can be used to determine the best way to reduce the force on a system.
    0 min
  • Basic Blocking Techniques part 2
    Rip Tompkins finishes safely removing a large piece of stem using an arborist’s block rigged directly below the cut. The available quiz covers the episodes: Speedline with redirect and ground anchor, knotless rigging, knotless rigging and speedline, and basic blocking parts 1 & 2 (A,T,Bp)
    0 min

About Climbing and Rigging

From the publisher's feed

This ArborPod™ series offers videos that can help an arborist identify parts of a line; select and use the appropriate knots; and learn about other equipment, resources, and techniques valuable in a variety of climbing and rigging scenarios.