Support us on Patreon: https://www.patreon.com/woodshoplife

Guy's Questions:

Hey guys, Have a, “what is your favorite finish” question. While this has been asked and answered a thousand times, I’m struggling to find a good answer for my scenario. I’m putting up a pine tongue and groove wall in a small bathroom. What would you suggest for the best and easiest application for finishing a wood bathroom wall with irregular surfaces? I want a slightly amber but not darkening, matte to approaching semi-gloss finish. I prefer to prefinish the uncut boards and cut to fit. Preferred options for finish application are either my electric spray gun or wipe on finish…although with the irregular surface I don’t want a difficult wipe on finish option. -Zack

Hey guys, I enjoy the podcast. I recently got a festool domino. I wanted to see if you guys could provide some tips that would help a new user. Also if you have bought or made some jigs that you would recommend. Thanks, Scott Birmingham, AL

Brian's Questions:

Hello! I hope you all are doing well! I live in the great state of Alabama just up the road a short bit from Huy in Toney. I greatly enjoy your podcast as it is definitely the best one on the subject of woodworking! I would consider myself a hobbyist woodworker although, I have built some commissioned pieces. I have a Ridgid contractor saw mounted to the mobile stand that it came with. I use this saw for all sorts of projects, including ripping full sheets of plywood. My question is concerning the riving knife. Are there any benefits to the dang thing? I may have bent mine during a previous operation but, it seems to me that it just gets in the way and prevents me from being able to move material smoothly through the blade and is causing burning in some or most of my cuts. Also, I am using the blade that came with the saw. Should I swap to a different blade? Is the brand of blade as important as the type of blade? Thank you very much for answering my questions and I look forward to listening to many more episodes of the podcast. Juston Bohannan

Huys' Questions:

I thought these two might lead to some good conversations. 1. If you were to build a set of dining chairs. What is your absolute tool you couldn’t do without. Would it be a domino or would you spring for a panto router. Maybe a shaper origin. 2. Besides a captured veneered panel could you get away with 1/16 veneers on one side and 3/32 backing veneers on the other side on a panel? Essentially would you veneer a panel with different thickness of veneers on either side. Reason I ask I might make a builtin shelving unit with 1/16” veneer on the front and some 3/32 backing veneer on the back side that faces the wall. It would be captured with the cabinet carcass dado so I would assume it wouldn’t potato chip. But who knows. Jesse @ beechlandfurniture