Sign up to save your podcasts
Or
Share Episode 64: A Conservation with Tim O'Neill and Fred Dimock about Voiding, Vacuum Reflow, and Oven Profiling
Share to email
Share to Facebook
Share to X
Share to email
Share to Facebook
Share to X
Or
Episode 64: A Conservation with Tim O'Neill and Fred Dimock about Voiding, Vacuum Reflow, and Oven Profiling
Welcome to episode 64 of the Reliability Matters podcast. On this episode, we’ll have a conversation with two industry experts on the subject of solder voiding mitigation and oven profiling, two subjects which influence solder voiding. This will be a two part episode. Today, we’ll dive into void mitigation and how vacuum reflow technology can help reduce or eliminate voiding. Part two, on episode 65 (in two weeks), we’ll discuss profiling best practices.
My guests today, and one the next episode are Tim O’Neill from AIM Solder and Fred Dimock of BTU. Tim will discuss voiding mitigation from a materials standpoint while Fred will bring cover equipment and profiling stragities.
Timothy O'Neill is the Technical Marketing Manager for AIM Solder. Operating out of AIM’s U.S. Headquarters, Tim is responsible for developing and optimizing product and technical information, collaborating with complimentary suppliers and equipment manufacturers and ensuring AIM's products exceed expectations and meet market requirements.
Tim is also a technical writer and presenter for industry trade publications and events. He has co-authored several papers on PCB assembly subjects.
Tim is also an IPC-A-610 Certified IPC Specialist.
Fred Dimock is the Manager of Process Technology at BTU International and recently started a consulting business, FCD-Global services.
Fred holds an Associate Degree in Mechanical Design from Wentworth in Boston and a Bachelors Degree in Ceramic Engineering from the State University of New York.
Fred has authored numerous articles on lead free solder, process control, and the operation of continuous furnaces. His papers have been published in English, Chinese, and German.
He has taught numerous SMTA solder reflow classes and participated in the 5-45 Subcommittee for the development of IPC-7801 Reflow Oven Process Control Standard.
Additionally, he wrote the chapter on solder reflow for the Handbook of Electronic Assembly and A Guide to SMTA Certification by Dr Lasky and Jim Hall.
He received Distinguished Speaker status at SMTA Guadalajara Mexico and is a key presenter for the SMTA Jump Start program for new engineers.
Tim O’Neill may be contacted here:
[email protected]
Fred Dimock may be contacted here:
[email protected]
My guests today, and one the next episode are Tim O’Neill from AIM Solder and Fred Dimock of BTU. Tim will discuss voiding mitigation from a materials standpoint while Fred will bring cover equipment and profiling stragities.
Timothy O'Neill is the Technical Marketing Manager for AIM Solder. Operating out of AIM’s U.S. Headquarters, Tim is responsible for developing and optimizing product and technical information, collaborating with complimentary suppliers and equipment manufacturers and ensuring AIM's products exceed expectations and meet market requirements.
Tim is also a technical writer and presenter for industry trade publications and events. He has co-authored several papers on PCB assembly subjects.
Tim is also an IPC-A-610 Certified IPC Specialist.
Fred Dimock is the Manager of Process Technology at BTU International and recently started a consulting business, FCD-Global services.
Fred holds an Associate Degree in Mechanical Design from Wentworth in Boston and a Bachelors Degree in Ceramic Engineering from the State University of New York.
Fred has authored numerous articles on lead free solder, process control, and the operation of continuous furnaces. His papers have been published in English, Chinese, and German.
He has taught numerous SMTA solder reflow classes and participated in the 5-45 Subcommittee for the development of IPC-7801 Reflow Oven Process Control Standard.
Additionally, he wrote the chapter on solder reflow for the Handbook of Electronic Assembly and A Guide to SMTA Certification by Dr Lasky and Jim Hall.
He received Distinguished Speaker status at SMTA Guadalajara Mexico and is a key presenter for the SMTA Jump Start program for new engineers.
Tim O’Neill may be contacted here:
[email protected]
Fred Dimock may be contacted here:
[email protected]
View all episodes
By Mike Konrad
4.8
88 ratings
Welcome to episode 64 of the Reliability Matters podcast. On this episode, we’ll have a conversation with two industry experts on the subject of solder voiding mitigation and oven profiling, two subjects which influence solder voiding. This will be a two part episode. Today, we’ll dive into void mitigation and how vacuum reflow technology can help reduce or eliminate voiding. Part two, on episode 65 (in two weeks), we’ll discuss profiling best practices.
My guests today, and one the next episode are Tim O’Neill from AIM Solder and Fred Dimock of BTU. Tim will discuss voiding mitigation from a materials standpoint while Fred will bring cover equipment and profiling stragities.
Timothy O'Neill is the Technical Marketing Manager for AIM Solder. Operating out of AIM’s U.S. Headquarters, Tim is responsible for developing and optimizing product and technical information, collaborating with complimentary suppliers and equipment manufacturers and ensuring AIM's products exceed expectations and meet market requirements.
Tim is also a technical writer and presenter for industry trade publications and events. He has co-authored several papers on PCB assembly subjects.
Tim is also an IPC-A-610 Certified IPC Specialist.
Fred Dimock is the Manager of Process Technology at BTU International and recently started a consulting business, FCD-Global services.
Fred holds an Associate Degree in Mechanical Design from Wentworth in Boston and a Bachelors Degree in Ceramic Engineering from the State University of New York.
Fred has authored numerous articles on lead free solder, process control, and the operation of continuous furnaces. His papers have been published in English, Chinese, and German.
He has taught numerous SMTA solder reflow classes and participated in the 5-45 Subcommittee for the development of IPC-7801 Reflow Oven Process Control Standard.
Additionally, he wrote the chapter on solder reflow for the Handbook of Electronic Assembly and A Guide to SMTA Certification by Dr Lasky and Jim Hall.
He received Distinguished Speaker status at SMTA Guadalajara Mexico and is a key presenter for the SMTA Jump Start program for new engineers.
Tim O’Neill may be contacted here:
[email protected]
Fred Dimock may be contacted here:
[email protected]
My guests today, and one the next episode are Tim O’Neill from AIM Solder and Fred Dimock of BTU. Tim will discuss voiding mitigation from a materials standpoint while Fred will bring cover equipment and profiling stragities.
Timothy O'Neill is the Technical Marketing Manager for AIM Solder. Operating out of AIM’s U.S. Headquarters, Tim is responsible for developing and optimizing product and technical information, collaborating with complimentary suppliers and equipment manufacturers and ensuring AIM's products exceed expectations and meet market requirements.
Tim is also a technical writer and presenter for industry trade publications and events. He has co-authored several papers on PCB assembly subjects.
Tim is also an IPC-A-610 Certified IPC Specialist.
Fred Dimock is the Manager of Process Technology at BTU International and recently started a consulting business, FCD-Global services.
Fred holds an Associate Degree in Mechanical Design from Wentworth in Boston and a Bachelors Degree in Ceramic Engineering from the State University of New York.
Fred has authored numerous articles on lead free solder, process control, and the operation of continuous furnaces. His papers have been published in English, Chinese, and German.
He has taught numerous SMTA solder reflow classes and participated in the 5-45 Subcommittee for the development of IPC-7801 Reflow Oven Process Control Standard.
Additionally, he wrote the chapter on solder reflow for the Handbook of Electronic Assembly and A Guide to SMTA Certification by Dr Lasky and Jim Hall.
He received Distinguished Speaker status at SMTA Guadalajara Mexico and is a key presenter for the SMTA Jump Start program for new engineers.
Tim O’Neill may be contacted here:
[email protected]
Fred Dimock may be contacted here:
[email protected]
More shows like Reliability Matters
View all
Freakonomics Radio
32,174 Listeners
99% Invisible
26,189 Listeners
Gemba Academy Podcast: Lean Six Sigma | Toyota Kata | Productivity | Leadership
195 Listeners
The Daily
111,521 Listeners
Pick, Place, Podcast
26 Listeners