
Sign up to save your podcasts
Or


Jets aren't just faster — they think differently. Chapter 16: spool-up lag and why jet power demands anticipation, swept-wing behavior near the stall, high-altitude aerodynamics and the narrowing margin between too slow and too fast, V-speeds and the takeoff decision, and the energy discipline jet flying demands.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 16. Also referenced: **Chapter taught:** Airplane Flying Handbook (FAA-H-8083-3C), Chapter 16 — Transition to Jet-Powered Airplanes.; **Handbook edition:** FAA-H-8083-3C.; 14 CFR 91.117(a) — 250 KIAS speed limit below 10,000 feet MSL.; 14 CFR 91.213(a) — inoperative instruments/equipment; MEL requirement for turbine-powered airplanes (incl. 91.213(a)(3)(ii) and 91.213(a)(5)).; 14 CFR 25.125 — landing distance definition (transport category).; 14 CFR Part 25 — airworthiness standards, transport category airplanes.; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
The turboprop is where piston habits meet turbine reality. Chapter 15: how a gas turbine actually makes power, free-turbine versus fixed-shaft designs, torque and ITT limits, beta range and reverse thrust, and what changes about engine handling when there's a fire section instead of cylinders.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 15. Also referenced: **Handbook edition:** FAA-H-8083-3C; 14 CFR 91.211 — Supplemental oxygen requirements (referenced in the chapter's high-altitude ground-training outline); **Other references named from the chapter:** RVSM (Reduced Vertical Separation Minimum) operations; RNAV/RNP and RAIM; example engines cited by the handbook — Garrett TPE331 (fixed-shaft constant-speed) and Pratt & Whitney PT-6 (split-shaft/free turbine).; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
Tailwheel airplanes aren't harder to fly — they're just brutally honest. Chapter 14: why the aft CG makes a taildragger want to swap ends, ground loops and how they start, three-point versus wheel landings, and the rudder discipline that tailwheel flying installs in every pilot who learns it.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 14. Also referenced: **Handbook edition:** FAA-H-8083-3C (Airplane Flying Handbook).; **Regulations cited on-air:** 14 CFR 61.31(i) — tailwheel endorsement: training + logbook endorsement from an authorized instructor covering normal/crosswind takeoffs and landings, wheel landings (unless manufacturer recommends against), and go-arounds.; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
A small multiengine airplane flies almost exactly like a single — right up until one engine quits, and then it becomes a completely different animal. In this episode Maya and Rico take on Chapter 13 of the FAA Airplane Flying Handbook, “Transition to Multiengine Airplanes.” They unpack why losing one of two engines costs you fifty percent of your power but eighty to ninety percent of your climb, decode the two most important markings on the airspeed indicator (the red line VMC and the blue line VYSE), and walk through exactly what your hands and feet do when an engine fails after takeoff. Along the way: feathering propellers, why VMC is not a fixed number, finding zero sideslip, and the one ground rule that never changes — the manufacturer’s AFM and POH always win.
This episode is built from the FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 13 — “Transition to Multiengine Airplanes.” Regulations and references cited on air: 14 CFR § 23.2135(c) (current definition of VMC); 14 CFR § 23.149 (historical VMC determination, including the 5-degree bank and 150-lb rudder-force conditions); 14 CFR § 23.2005 (certification levels and performance-level classification); 14 CFR § 23.2120(b) (single-engine climb-gradient certification, 1.5% at 5,000 ft); and amendment 81 FR 96689 (effective December 30, 2016). Multiengine-class Airman Certification Standards tasks for the VMC demonstration and in-flight feathering/unfeathering are referenced. Current as of June 2025.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
Your first complex airplane hands you three new levers and a whole new failure mode. Chapter 12: how retractable gear systems work and how pilots still land gear-up anyway, the constant-speed propeller and what manifold pressure really tells you, cowl flaps, and the flows and checklists that keep the step-up from biting.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 12. Also referenced: **Handbook edition:** FAA-H-8083-3C.; 14 CFR 61.31(f)(1) — high-performance airplane definition (engine of more than 200 horsepower).; 14 CFR 61.1 — complex airplane definition (retractable landing gear, flaps, and controllable-pitch propeller; seaplane variant; FADEC provision).; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
Performance maneuvers exist to make your hands smarter. Chapter 10: steep turns and the overbanking tendency, the steep spiral, the chandelle's climbing 180, and the lazy eight — the maneuver that punishes anyone who tries to muscle it. What each maneuver is actually teaching, and the common errors examiners see every week.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 10. Also referenced: **Handbook edition:** FAA-H-8083-3C.; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
Every flight ends the same way, and Chapter 9 is the biggest chapter in the book for a reason. Maya and Rico work through the whole arrival: what a stabilized approach actually means, the roundout and flare that everyone struggles with, crosswind technique, short and soft fields, and the golden rule that a go-around is never a failure.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 9. Also referenced: **Handbook edition:** FAA-H-8083-3C (Airplane Flying Handbook).; **Cross-referenced FAA publications (as cited in the chapter):** Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25, as revised); Risk Management Handbook (FAA-H-8083-2, as revised).; **Episode-description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
The traffic pattern is aviation's town square: everyone passes through, and the rules exist so nobody trades paint. Chapter 8 covers the standard pattern and its legs, entries done right, towered versus non-towered flow, and the collision-avoidance habits that keep the busiest square mile of sky orderly.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 8. Also referenced: **Chapter taught:** Airplane Flying Handbook (FAA-H-8083-3C), Chapter 8 — Airport Traffic Patterns.; 14 CFR part 91, section 91.117 — aircraft speed limits; the handbook cites it as the restraint on traffic-pattern airspeeds (at most towered airports, no greater than 200 knots / 230 mph).; Aeronautical Information Manual (AIM) — cited as a source of general information on airport operations and traffic patterns.; Traffic patterns ensure air traffic moves into and out of an airport safely; direction, placement, and altitude may depend on local conditions found in the Chart Supplements/AIM.; Manufacturer-recommended pattern speeds generally 70–90 knots for typical piston singles; 14 CFR 91.117 restrains speeds (≤200 knots / 230 mph at most towered airports); match the airspeed of other traffic.; **Handbook edition:** FAA-H-8083-3C.; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
Ground reference maneuvers are where the wind stops being a number and becomes something you fly against. Chapter 7: drift and crab, the rectangular course, S-turns across a road, and turns around a point — the maneuvers that teach your hands to correct for wind while your eyes stay outside.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 7. Also referenced: **Chapter taught:** Airplane Flying Handbook (FAA-H-8083-3C), Chapter 7 — Ground Reference Maneuvers.; **Handbook edition:** FAA-H-8083-3C.; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
The takeoff is short, dense, and completely unforgiving of autopilot-brain. Chapter 6 walks the whole sequence — lineup, the roll, rotation, lift-off, and the first five hundred feet — plus the crosswind technique that separates tidy takeoffs from scary ones, and when to reject the takeoff entirely.
In this episode:
Sources: FAA Airplane Flying Handbook (FAA-H-8083-3C), Chapter 6. Also referenced: **Chapter taught:** Airplane Flying Handbook (FAA-H-8083-3C), Chapter 6 — Takeoffs and Departure Climbs.; Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25, as revised) — referenced by the chapter for a fuller discussion of density altitude.; **Handbook edition:** FAA-H-8083-3C.; **Episode description disclosure:** Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.. Current as of August 2026 — always verify against the current FAR/AIM.
Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain source material. Education and entertainment only — not flight instruction; always consult your CFI and the current FAR/AIM.
From the publisher's feed
Flying by the Book takes the FAA Airplane Flying Handbook one chapter at a time — and makes it stick. Maya and Rico are AI-generated hosts. Episodes are produced from official FAA public-domain…