
Sign up to save your podcasts
Or


Seven seconds of how the parts go together: 3D-printed case, PCB, e-paper module, three AAA cells. Firmware, PCB and 3D-printable case are open source.
https://wake-electronics.com
The coil is wound into the enclosure frame of Tinta. The antenna is tuned by bringing the resonance to 13.56 MHz with the trim capacitor. Measured by the pico of the circuit via DAC and transmitted via USB to the PC: A ascii-Art tuning tool! Firmware, PCB and 3D-printable case are open source.
https://github.com/c0de111/tinta
This is a continuous broadcast, there is no schedule, I stream whenever I have internet, time, and mood
Experiments on NFC with a simple home-build circuit: My phone's 13.56 MHz field delivers energy to a ST25 chip via a hand-wound coil, powering it up, receiving a simple command via NFC, subsequently waking up a Pico microcontroller that executes the command. In this case, slow or fast flashing of a LED. Firmware, PCB and 3D-printable case are open source.
This work was given an honourable mention in the "Least Power" category of the Hackaday Green-Powered Challenge 2026.
https://hackaday.io/project/205461-harvesting-nfc-energy-to-transmit-commands
From the publisher's feed