PeerTube de WeKeys

Another video of Paignton seafront, pointing from below the shoreline café and restaurant, towards the harbour. Again trying to avoid getting people in the video.

A simple video of Paignton beach / seafront, weather was calm, so the sea is gently washing up on to the shoreline.

I have tried to avoid recording people.

foto love story neues ausm perlkatalog, die moderne hausfrau macht ki oder so.

Pre-launch page: https://www.crowdsupply.com/wake-electronics/tinta

How the 4.2-inch enclosure is built, feature by feature: every sketch appears on the body it is drawn on, then the pad or pocket it produces. Bezel first, lying face down the way it is printed, then the e-paper module, then the case on top of it, the board, the battery holder, and finally the wall mount, whose plate lifts off at the end to show the four hooks that carry the sign.

These are the features of the actual FreeCAD file, shown one at a time, not an illustration of them. Firmware, PCB and 3D-printable case are open source.

https://wake-electronics.com

Open Sounds Hackenheim Synth Nerds Meetup from september 11th to 13th, 2026.

This is the Livestream from saturday evenings jam session.

September 9th

Pre-launch page: https://www.crowdsupply.com/wake-electronics/tinta

Rendering of the 7.5-inch Tinta going onto its baseplate. Press it on, slide it sideways, done — no screws, no tools, and the plate stays on the wall when the sign comes off again.

Drawn and animated in FreeCAD. Firmware, PCB and 3D-printable case are open source.

https://wake-electronics.com

Pre-launch page: https://www.crowdsupply.com/wake-electronics/tinta

Rendering of wall mount of the 7.5-inch Tinta: the view behind the sign, the rails taking the case, and a section through one of them. Then the sign clipping on, seen from the front.

Drawn and animated in FreeCAD. Firmware, PCB and 3D-printable case are open source.

https://wake-electronics.com

Pre-launch page: https://www.crowdsupply.com/wake-electronics/tinta

On and off again, in real time, with one hand.

Firmware, PCB and 3D-printable case are open source.

https://wake-electronics.com