Professor

Professor

By Gordon F Snyder JrTechnology
Download on the App Store

Professor episodes

  • Cable Breakthrough and Wardriving by Train [28:29]

    Intro Mike:

    On November 6, 2006, BroadLogic Network Technologies, a San Jose chip manufacturer, announced The World's First Massively Parallel, Multi-Channel Video Processor, a terapixel-speed video processing chip that will allow cable providers to recover bandwidth that can then be used to deliver more high definition channels, video on demand and high bandwidth data services without major network upgrades.

    Mike: Gordon, before we discuss the Boradlogic product, can you give us an idea of how current cable delivery systems work?

    Traditional cable delivery systems work by allocating 6MHz of analog bandwidth for each channel. Most cable providers offer approximately 80 channels that consume (6 MHz/channel x 80 channels) 480 MHz of bandwidth. Typical cable networks provide only 750 MHz of bandwidth and with 480 MHz used for video, there is not much left for other services.

    Let's think about this a little bit more - one channel consumes 6 MHz of bandwidth but it takes 480 MHz of bandwidth to deliver that single channel to your TV while "wasting" (480 MHz - 6 Mhz) 474 MHz of bandwidth. Not very efficient even if you have a few TV's going in your house watching different channels at the same time. In summary and according to an article at Light Reading and linked in the show notes:

    Each analog channel consumes 6 MHz of capacity (or roughly 1/125th of the total capacity of an upgraded cable plant). Re-claiming that channel slot frees up enough capacity to launch 2 more channels in HDTV (each of which consumes about 2.4 MHz), or ten more digital Standard Definition (SD) channels (each of which consumes about 0.6 MHz), another ten QAMs, each capable of delivering an additional VOD stream, or more broadband [Internet] capacity.

    Many of the hundreds of digital broadcast TV channels a cable operator delivers are not being watched at any given time. It is a network inefficiency that can be remedied by simply switching off those channels that are not being watched. By reclaiming much of this analog spectrum, splitting fiber nodes, and employing switched broadcast video (SBV) techniques, there is lots of room for cable to expand service offerings, including HDTV and VOD.

    SBV has attracted major interest to this point and involves the delivery of all 80 or so channels in digital format � it works but requires every attached TV in the house to be connected through a set-top box with each box having its own remote controller - we have 6 connected TVs in my home now so 6 boxes plus 6 more controllers - expensive and we have enough time keeping track of a single remote.

    Light Reading says Comcast Corp. has an aggressive plan to cut the average number of analog channels it carries in half over the next five years, from 70 to 35. That means moving some three dozen basic cable networks from analog to digital-only carriage.

    This is where things get interesting:

    Until digital penetration reaches 100% being left off the analog tier means reduced distribution. And that means lower affiliate fees, and lower advertising revenue.

    It's gonna be slow because subscribers will not want to pay for the extra boxes, will not have room for them on their shelves, etc.

    This means the programmers will fight this tooth and nail. Ironically, it is SBV that may well help prove their case is built on a house of cards. Cable TV programming networks sell themselves to advertisers based on their total distribution footprint - say 40, 60, or 80 million homes. The metric is bogus, as only a small fraction of homes are viewing it. With SBV, MSOs will have all the statistical details on who is watching, and eventually, so will advertisers.

    Mike: So last week along comes Broadlogic, what does this product do?

    According to Broadlogic website:

    The BL80000 TeraPIX chip is capable of decoding dozens of digital video streams and generating a full analog and digital service tier, including an 80-plus analog channel lineup, that any number of cable-ready devices (TVs, DVRs, PCs with tuner cards, etc.) can view, plus up to 160SD or 50HD programs.

    The TeraPIX processor powers a new type of Residential Gateway, installed outside or just inside a residence, which allows the network to be all-digital, while subscribers continue to receive the cable-ready analog video, digital video, high speed data and voice services they crave. Conventional set-top boxes output one channel at a time and thus feed only one TV. Cable MSOs can use this technology to take their networks all digital, thus tripling their digital capacity at a time when rising content and competitive requirements demand it.

    Mike: It sounds like the Broadlogic chip may be a much more cost effective solution - can you give more detail?

    More according to Broadlogic website:

    The BroadLogic TeraPIX video processor works by decoding bandwidth-conserving digital video signals delivered by a cable operator, and generating 80-plus high-quality channels of television. Cable operators get their extra bandwidth, and consumers get the channel lineups they're used to without having to get more set-tops, run more coax, or lose more remotes.

    The TeraPIX processor enables solutions that support virtually all existing analog and digital consumer devices. For example, if a subscriber has a DVR set-top from their cable operator, the digital signals are passed through TeraPIX to the DVR.

    The price of an individual chip is around $300 when purchased in bulk (1000 or greater numbers) and cable companies are saying this could be a cost effective way to increase network bandwidth.

    The technology is moving at such an incredible pace and it is easy to see more bandwidth and more applications and, from an academic perspective, the ability to provide more and more quality IP delivered content to our students at a distance. Very exciting stuff and - what's next??

    Mike: Let's change the subject a bit - I know you took a train ride last week and performed an interesting "experiment". Can you fill us in with some details?

    On Tuesday I had an excellent visit with the Borough of Manhattan Community College Video Arts and Technology Program (http://www.bmcc.cuny.edu/speech/VAT/VAT.html ) faculty and administrators. BMCC has an NSF project grant titled "Creatiing Career Pathways for Women and Minorities in Digital Video Technology" , an exciting project with an HDTV focus. We're looking forward to lots of good results from the VAT group at BMCC.

    Instead of driving I took the AMTRAK train down to New York City from Springfield, MA. I had my notebook computer with me and on the way home, as I was doing some work, I decided to let NetStumbler ( http://netstumbler.com/ ) run in the background. NetStumbler is a Windows application that allows you to detect 802.11b, 802.11a and 802.11g Wireless Local Area Network Access Points (WLAN AP's). In addition to Netstumbler, there is MacStumbler for Macintosh computers, and Kismet for machines running Linux.

    Many people use Netstumbler for wardriving that involves driving a car around with a wireless enabled laptop or PDA and logging wireless Wi-Fi networks. According to the Netstumbler website wardriving was first started in the San Francisco area by the Bay Area Wireless Users Group (BAWUG) and is similar to using a scanner for radio. Many wardrivers will use GPS devices to find the exact location of the network found and log it on a website. In fact, if you have a GPS device attached to your computer Netstumbler will automatically log the latitude and longitude settings for future reference. There are several active databases on the web that maintain lists of open hotspots - one of them is maintained and accessed via the Netstumbler site.

    In the train I started up Netstumbler on my PC at the New Rochelle, NY stop and just let it run until I got to Springfield, MA with some interesting results. Netstumbler logs, among other things, the access point MAC address, SSID and whether or not the AP is running any kind of encryption. An un-encryped access point is one that is wide open for access. Between New Rochelle and Springfield I logged 1441 access points, many unencryped and wide open for public access. SSIDs were sometimes very descriptive and I found open access points from at least one large insurance company, one law firm and the 36th floor conference room of an unknown company. I also got a kick out of some of the creative SSID names people are using.

    Hundreds of the access points still had the Vendor SSID with linksys, NETGEAR and default [note: SSID default is commonly used by no-name routers sold by the big box retailers] popping up on my screen as we rocked along the tracks at 60 mph. Hundreds were setup for open access - I could not actually log in to any because we were moving to fast but I'm convinced I could walk the tracks from New Rochelle to Springfield and maintain free wireless access by piggy-backing on these networks.

    I don't want to get into a debate on what's legal and what is not - my concern is seeing so many open access points with many likely connected directly into corporate networks. I thought we had this security problem licked but it appears many are still buying these things and just plugging them in.

    Anyone want to carry a load of batteries?

    References:

    Netstumbler Website: http://www.netstumbler.com

    BROADLOGIC UNCLOAKS CABLE�S SECRET WEAPON; Nov 6, 2006; http://broadlogic.com/11062006press.htm

    Light Reading: http://www.lightreading.com/document.asp?doc_id=106730
    29 min
  • Flat World Strategies: Changing Technologies [CC Journal Article Podcast 23:25]

    Flat Word Strategies: New Technologies Create Interactive Learning

    Introduction

    In "The World is Flat," Thomas Friedman makes the case that a number of forces have converged to flatten and restructure the global competitive landscape, and that this process is continuing and accelerating. This flattening has empowered individuals to compete and collaborate on a global scale like never before. As educators, we must understand the implications for us, our students and our institutions and more globally on education and learning. Key flatteners that are already impacting education include the Internet, open source software, search, wireless/mobility, VoIP, digitalization, personalization and virtualization. One of the key observations of this less predictable, less hierarchical flattened world is that knowledge is widely distributed and rapidly changing leaving traditional course-based learning increasingly unable to meet the needs of students. Bridging this divide requires new paradigms in education that incorporate "flat' world strategies such as informal learner-driven knowledge transfer and new technologies and forms of learning.

    Question from Mike: Gordon, can you give us a little background on some of the new tools being used?

    In the 1990's many of us first started to use the Internet to deliver and supplement content for our courses. We developed relatively static web pages that included text and pictures in similar format to traditional textbooks. Today with the combination of high bandwidth access and new development tools, fresh web content looks and feels much different. With "Web 2.0" tools and delivery methods, instructors are discovering new ways to develop and deliver content to and engage their students. Among the new tools finding their way into business and into the hands of our students are:

    • Search,
    • Instant Messaging,
    • Blogging/Podcasting,
    • Wikis,
    • RSS/Subscription, and
    • Wireless/Mobility.

    While many faculty are well-versed at using websites, email, and course management systems to interact and engage with their students, most have been slow to adopt some of these "new" technologies into and outside of their classroom.

    These new tools are part of the dynamic, interactive new Internet many are calling Web 2.0. According to techtarget.com, the term Web 2.0 was first used by O'Reilly Media and MediaLive International in 2004 during a next generation web conference. Web 2.0 based technological advances have continued over the last two years and new applications are coming out daily that allow faculty and their students to experience new ways of interacting and learning. Much of this new technology is built around two fundamental technologies, AJAX and RSS.

    Question from Gordon: AJAX � that�s soap, right Mike? Jesse James Garrett of Adaptive Path (www.adaptivepath.com) is responsible for coining the acronym AJAX in a February 2005 article. In the article, Garrett describes AJAX or Asynchronous JavaScript and XML, as a new approach to web applications. In terms of user interaction, what makes AJAX stand out is that it allows developers to create web applications that start to approach the richness and responsiveness of desktop applications. AJAX is not a technology, nor is it code or an application that can be downloaded. Instead, it is a collection of technologies that have all matured and when combined together provide for a new paradigm for the architecture of web applications. More precisely, AJAX includes XHTML and CSS; DOM or the Document Object Model; XML and XSLT; XMLHttpRequest; and JavaScript.

    Technologies

    Role

    XHTML + CSS

    Standards-based presentation

    Document Object Model (DOM)

    Dynamic display and interaction

    XML + XSLT

    data exchange and manipulation

    XMLHttpRequest

    Asynchronous data retrieval

    JavaScript

    Binds everything together

    To understand how AJAX works, we first have to understand the classic or traditional client-server web application model. In this model, user actions (typically through a web browser interface) trigger an HTTP request back to the web server, which processes the request (retrieving data, performing calculations, etc) and responds to the client (user) with an HTML page. While this model has been extremely successful at building out the Internet, it breaks down when developers try to replicate the user experience of desktop applications. That�s where AJAX comes in. AJAX represents a fundamental shift in what's possible on the Web. To provide this functionality, we introduce an AJAX engine as an intermediary into the traditional client-server model. Simply put, instead of loading a web page at the start of the session, the browser loads the AJAX engine on the client side of the relationship. This engine is JavaScript code that coexists with the browser, usually in a hidden frame, and is responsible for rendering the web interface and communicating with the web server on the user's behalf. Practically speaking, what this does is ensures that the user is never looking at an empty browser window waiting for the server to respond and the page to refresh. With first generation web technology, user actions would generate an HTTP request; with AJAX these requests are JavaScript calls to the AJAX engine. Many user actions don't require communication with the server and can be handled by the engine. If the server is needed, the engine makes the request asynchronously using XML, with no interruption of the user-application interaction.

    Question from Mike: Gordon could you tell us a little bit about RSS?

    RSS (RDF Site Summary and also referred to as Really Simple Syndication) is a technology used to push content out to subscribers using an aggregator application like My.Yahoo or Google Reader. In addition web browsers like FireFox and Internet Explorer 7.0, along with Mac OS X and Microsoft's upcoming Vista operating system, have built in aggregator functionality. These applications allow the user to subscribe to different feeds and have content pushed out to the aggregator. Here's an example of how you can use this technology � if you have a free Yahoo account, you can configure your account to aggregate, or collect, different types of content. Once setup, you can go to any computer with a browser and an Internet connection, go to My.Yahoo.com, log in with your username and password and have your custom page come up with all of your subscribed feeds listed. Your feeds are selected by you and you can add and remove as you see fit. Here are some the feeds we like and subscribe to: Gizmodo for breaking gadget news, Broadband Reports for news on delivery technology and Information Week for breaking IT news. Let's look at how it works � let's say Information Week publishes an article on a IT workforce needs � if you are logged in to your aggregator and subscribed to the Information Week feed, you see the title, a brief summary of the article and how long ago it was published (minutes, hours, days, weeks, etc) on your aggregator page. If the article looks interesting you can click the link and then read the entire article. This technology has allowed many to cut back considerably on hard copy technology journal reading and email subscriptions � most common journals and periodicals are now publishing content with RSS feeds, allowing readers to subscribe and rapidly scan and review content.

    RSS developers create an XML file that describes content as it is posted on websites. The blog at nctt.org/blog is a good example if you want to take a look at an XML file. The blog is written using a word processor and then the content is typically copied and pasted into a blog editor with the XML file automatically updated with the latest content. If you are a subscriber to nctt.org/blog your aggregator checks the NCTT blog site periodically for updates and, if it finds one, it lists the content on the aggregator screen. You can see a brief summary on the aggregator and, if you wish to read further, you can click the link and read the entire blog.

    Your current students are using this technology on, in some cases, a minute by minute basis. Let's take a look at how it can be used. Let's say you wake up one morning not feeling well and have to cancel your classes. When and how do your students find out you are out sick? Maybe you send out an email which requires students check their campus email account or (worst case) you call in and a note goes on the door or board. In both cases many, if not all, of your students will show up for class and be disappointed to find out you will not be there. Using a simple RSS feed, you could give your students the option of subscribing and actually push the message out to their cell phone or other connected device. Students get the message and do not end up showing up for a class that has been cancelled.

    Question from Gordon: Mike, What are some of the popular apps out there now that people are using?

    The �killer app� or application that demonstrated the potential and viability of AJAX is Google�s gmail service. The use of AJAX has since exploded. Examples include the aggregators we mentioned earlier, which all leverage AJAX technology to provide for a more pleasing user experience, as well as a whole class of �webware� � web-based applications that attempt to replicate desktop applications, including Writely, ZohoWriter, ZohoShow, Google Spreadsheets, and DabbleDB. With these applications, you and your students have access to a virtual office suite, allowing students to interact and collaborate online. This new class of tools and technologies provide faculty with an opportunity to engage their students inside and outside of the classroom.

    Question: Gordon: Where can people find the content of this article?

    You can find the content of this podcast in the Oct/Nov 2006 edition of Community College Journal, at nctt.org/blog and at nctt.org/podcast. In addition you will find a maintained list of several interesting links that further demonstrate these technologies. You can reach the authors at [email protected] and [email protected] and at their National Science Foundation center and project websites at www.nctt.org and www.maitt.org

    24 min
  • Podcast Can I See Your Notes? [10:55]
    Researched and written by: Michael QaissauneeIn Death by Powerpoint, we talked about becoming a better presenter, but we (myself included) take for granted that the copious notes students take in class capture the key aspects of our great lectures, are well organized, and will provide what students need to retain for tests and for further courses. Have you ever looked at your students' notes? As an exercise, try collecting and reviewing notes from a cross-section of your classes. Most faculty won't be surprised to learn that good note-taking is a lost art. This got me to thinking ... Where do our students and our kids learn to take notes? What I've concluded is that we don't, at any level, do any formal education on note-taking - it's all ad-hoc; most teachers are rightly focused on the content. But what's really troubling here, is that good note-taking is a critical part of learning and clearly we don't do enough to teach it and to reinforce with students the importance of good note-taking.

    What I'd like to introduce to you today is the Cornell Note-taking method. Developed by Cornell's Walter Pauk to help Cornell University students better organize their notes, this system is just one of many different strategies designed to help students take more effective notes. No one method is better than another, the goal is to find a method that works for you. I encourage you to share this method with your students and encourage them to give the method a chance. At the very least, it will get them and you thinking about how they take notes.

    The Cornell Note-Taking System

    To use this system, separate your page into 3 separate sections (nice illustration here), as follows:

    1. The Notes column (6-6.5 inches wide on right) is the largest and primary section. This is where the notes go, whether they're lecture or textbook notes. Stress using bulleted lists for easy skimming, as well as economy of language - abbreviations (see resources below), short sentences and fragments and eliminating all unnecessary words.
    2. The Cues column (2-2.5 inches wide on left) is used to highlight main ideas, clarify meanings, give examples, draw diagrams, or link ideas and examples. If done well, this area is where you do the bulk of your studying from.
    3. The Summary area (1-2 inches high on bottom) is used to reinforce concepts and provide an overview area where you write a sentence or two to summarize the notes on the page. This section is great for skimming your notes and locating information.

    Now for the technology You didn't think I'd do a blog without including some sort of technology did you? I really don't have the time nor the inclination to sit with pencil, paper and a ruler to layout the Cornell method. So instead, here are a couple useful links:

    • The Cornell Method PDF Generator is a web-based form that creates printable PDF's in the Cornell style with either unlined, ruled, or graphed notes sections.
    • Cornell Word Templates provides instructions for creating your own Microsoft Word Cornell template, as well as down-loadable template that can be customized to suit your needs.
    Other Resources

    Note Taking - Symbols and Abbreviations

    This site provides a great list of common abbreviations that can help students take down their lecture notes as quickly as possible.

    Temple University: The Cornell Note-Taking Method

    This link shows an example of a page of notes taken using the Cornell method. Using this as a handout is a quick and easy way to illustrate the method to students.

    Temple University: General Note-Taking Tips

    A site with more general tips and suggestions for better note-taking. A great place to send students as they start to think about their note-taking.

    BYU: The Cornell Note-Taking System

    A nice overview of the Cornell system. Not the only place to learn about the system, but a good starting point.

    Some additional PDF resources on the web can be found at PDF Pad. PDF Pad allows you to generate pdf version of a variety of useful documents, including

    • Calendars
    • Flags
    • Graph Paper
    • Smith Chart (for Electrical Engineering)
    • Staff Paper (for musically inclined)
    • Storyboards (for aspiring directors and producers; and maybe control freaks)
    • Sudoku

    11 min
  • Blogcast 9: Show Updates and Writely at 10,000 Feet [12:45]

    Writely and other Google products like Google Spreadsheets, Google Calendar, Google Talk and Gmail have become a pretty formidable combination. The only disadvantage at this time is you have to be online to use. Next year, with new browser versions coming out, things will change significantly.

    13 min
  • Blogcast 8: Jajah – Web Activated Telephony [8:16]
    Jajah, started by Roman Scharf and Daniel Mattes in 2004, is offering an interesting service that may challenge Skype and other similar products. Jajah provides a paid service that allows calls to be routed landline/cell to landline/cell in many parts of the world without long distance fees. Here's how it works: Let's say I'm a Jajah customer and I want to call my brother who is living in London. I log into my Jajah account at jajah.com, enter my brother's landline or cell number and my landline or cell number. Jajah makes the connection and rings my phone and then my brothers phone over connections that are local to each of us.See www.nctt.org/blog for complete note set.
    9 min
  • Blogcast 7: Death By Powerpoint
    Many people have very strong - mostly negative - opinions about Powerpoint. The phrase "death by Powerpoint" has been used (some would say over-used) to describe the painful experience of sitting through a bad Powerpoint presentation. The sentiment can be summed up by borrowing and adapting a phrase from Security Consultant and blogger Steve Riley - Powerpoint is "... the place where knowledge goes to die." While we don't disagree with critics that the use of Powerpoint is part of an ever-present misconception that technology fixes things or makes things better, we're not here to pile on - instead we'd like to offer some ideas to make Powerpoint more effective in your classroom.
    15 min
  • Blogcast 6: WiMAX - Why Not? [17:20]

    WiMax - Why Not?

    Craig McCaw is a visionary, who has had an uncanny ability to predict the future of technology. WiMAX has the potential to do for broadband access what cell phones have done for telephony - replacing cable and DSL services, providing universal Internet access just about anywhere - especially for suburban and rural blackout areas.

    Just like in the early 1980's Clearwire's Craig O. McCaw has been buying up licensed radio spectrum. You may not have heard of Craig but in the early 80's he recognized local cell permits being sold by the the FCC were greatly undervalued and he started bidding cellular phone licenses. He did his buying under the radar screen of the telcos and, by the time they recognized what he was doing it was basically too late � Craig had already purchased and owned licenses in most of the major markets.

    Of course he had the money - in 1986 Craig and his brothers sold a cable television business their father had left them for $755 million and concentrated on building a national cellular phone network. The story continues - MCI Communications sold its cellular and paging operations to Craig in 1986 for $122 million and their company went public with the brothers holding around 40% of the company. His last big acquisition in the cell market was the $3.5 billion deal for LIN Broadcasting where he outbid Bell South. With the LIN acquisition Craig and his brothers had almost complete control of the 1989 U. S. cell market.

    McCaw brothers sold the company to AT&T in 1994 for $11.5 billion and a lot of people figured they would just ride off into the sunset � not the case!

    Fast forward to today - Clearwire, under Craig's direction, has quietly purchased enough licensed radio spectrum to build a national WiMAX network.

    What is WiMax?Let's begin by putting WiMax in context. You and I both have cable modems. This is Broadband access - for residential access either a DSL or cable modem and at the office either a T1 or a T3 line - pretty expensive and not available in all areasWe also have WiFi access - at home, at work or on the road WiFi routers or wireless access points provide mobility with connectivity - hot spots are very small, so coverage is sparsenot that many years ago, we both used dial-up access - many (71%) use dial-up either because broadband is not available or too expensive - painfully slowThat's where WiMax comes in to the picture. WiMAX or Worldwide Interoperability for Microwave Access is the name given to the IEEE 802.16 wireless standard, which provides:

    • speed of comparable to broadband service
    • wireless access (significantly cheaper than cable or DSL and much easier to extend to suburban and rural areas)
    • broad coverage - much more like a cellular network rather than small isolated WiFi hotspots
    WiMAX works much like WiFi but supports higher speeds, greater distances and a greater number of users. What's needed for WiMax?WiMAX components include:
    • A WiMAX tower, not unlike a cell-phone tower, but able to cover a much larger area - up to 3000 square miles for a single tower versus 10 sqr miles for cell [Rhole Island is 1045 sqr miles; Bermuda 22 sqr miles; and Delaware 2489 sqr miles]
    • The second component is a WiMAX receiver (a small box or PCMCIA card, or integrated into a laptop - like WiFi in Centrino/Pentium M)
    A WiMAX tower can connect directly to the Internet using a wired connection (e.g. a T3 line) or connect to another WiMAX tower using a line-of-sight, microwave link.

    Can you give us some specs for WiMaxWiMAX can provide two forms of wireless service:non-line-of-sight, WiFi sort of service,

    • a small antenna on your computer connects to the tower

    • uses a lower frequency range -- 2 GHz to 11 GHz (similar to WiFi)

    • lower-wavelength transmissions provide greater immunity to physical obstructions

    • limited to a 4-to-6 mile radius (~25 square miles of coverage; similar in range to a cell tower)

    line-of-sight service,
    • fixed dish antenna points to the WiMAX tower from a rooftop or pole
    • stronger and more stable, so it's able to send a lot of data with fewer errors
    • use higher frequencies (up to 66 GHz)
    • at higher frequencies - less interference; more bandwidth.

    Currently, the fastest WiFi connection is up to 54 megabits per second under optimal conditions. WiMAX is predicted to handle up to 70 megabits per second - providing the equivalent of cable modem speeds even when shared by several dozen businesses or a few hundred home users. Distance is where WiMax really outshines WiFi - while WiFi has a range of about 300 feet, WiMAX will provide wireless access for a radius of 30 miles. The increased range is due to the frequencies used and the power of the transmitter. Of course, at that distance, terrain, weather and large buildings will act to reduce the maximum range in some circumstances, but the potential is there to cover large geographic areas.

    What would happen if I got WiMAX

    An Internet service provider sets up a WiMAX base station 10 miles from your home. You'll need a WiMAX-enabled computer or upgrade your old computer to add WiMAX capability. You would receive a special encryption code that would give you access to the base station. Potentially, the cost could be much lower than current high-speed Internet fees because the provider never had to run cables. For your home network, things wouldn't change much. A WiMAX base station would send data to a WiMAX-enabled router, which would then send the data to the different computers on your network. You could even combine WiFi with WiMAX by having the router send the data to the computers via WiFi.

    Craig has also attracted some major investors with Motorola and Intel giving him close to $900 million in July. Rumor has it that, with Clearwire's potential network, within 3 years the company will be able to offer nationwide WiMAX service for around $25 per month which is significantly less that people are currently paying for other providers nationwide lower bandwidth data services.

    Clearwire is not without competition. According to WiMAXTrends.com:

    On August 8 Sprint Nextel President and CEO Gary Forsee announced that Sprint will adopt WiMAX as it technology choice for its next generation "4G" network. Mr. Forsee announced that its current EV-DO network will complement a mobile WiMAX network. The mobile WiMAX network will be utilized with a full range of WiMAX-embedded devices.

    The products are coming and the providers are committed to build the network. This makes me think seriously about the Muni WiFi initiatives we are seeing springing up in most U.S. cities. Will they survive? If I'm a business person on the road do I take my chances on Muni WiFi or do I just pay Clearwire $25 per month for guranteed access?

    References:

    A Wake Up Call from Craig McCaw, Business Week Magazine, July 24, 2006

    The Wizard of Wireless: http://www.achievement.org/autodoc/page/mcc0bio-1

    SPRINT NEXTEL ANNOUNCES THAT WIMAX IS TECHNOLOGY CHOICE FOR ITS NEXT GENERATION "4G" NETWORK: http://WiMAXTrends.com

    18 min
  • Blogcast 5: Google, Gdrive, and Platypus: Infinite Storage, Bandwidth, and CPU Power [17:54]
    Since the launch of Gmail and the (at the time) unheard of storage space of 2 gigabytes, a number of developers have created tools to allow users to use their Gmail accounts for file storage. Examples include the GMail Drive shell extension, an add-on for the Firefox browser - Gmail Space, and even an equivalent for Mac OS X. Each of these add-ons/applications allows users to seamlessly email files to their Gmail accounts, while appearing to the native OS as another drive. Likewise, there's been a lot of buzz about Google's launch of Google Spreadsheets , and their acquistion and integration of Upstartle and their online wordprocessor Writely. In this blogcast we discuss some of these online tools.See www.nctt.org/blog for complete show notes.
    18 min
  • Six Trends Driving the Global Economy [23:49]

    The most recent issue of Wired magazine details six trends that are driving the global economy. Not surprisingly, 5 of the 6 are spearheaded by ICT-enabled companies and rely on a number of technologies that we seem to be discussing with greater regularity (SOAP, AJAX and Web 2.0). In this podcast we discuss these important trends, and how they are reshaping the global economic landscape.

    24 min
  • BlogCast4: Has Skype Been Cracked? [13:07]
    On July 13, 2006 Charlie Paglee claimed on the VoIPWiki Blog that a Chinese business has reverse engineered Skype's communications protocol. Rumor has it the un-named Chinese company will produce a Skype compatible soft phone and will go public with it by the end of this month.

    Complete shownotes at: http://www.nctt.org/blog/index.php#53

    Also see NCTT Summer Workshop Resource Area for Workshop Content: http://www.ncttbuzz.org/NCTT_01/

    NO LOGIN IS REQUIRED TO SEE CONTENT!
    14 min

About Professor

From the publisher's feed

National Center for Telecommunications Technologies Director Gordon F Snyder Jr and Mid Atlantic Institute for Telecommunications Technologies Director Mike Qaissaunee take a weekly look at the…