You don't have to be in the tech industry you understand importance and value of data. Industries have always collected various sets of data, first manually and, in modern times, automatically. The volume of data has historically been limited to the ability to capture and store it. Recent advances in technology have vastly increased the ability to capture and store data. The industry 4.0 movement has fueled both of desire and requirement to capture data.

We have created a "be careful what you ask for" scenario as we now are capturing data at an unprecedented rate but frequently lack the ability to discern and analyze all of our newly captured data.

My guest today, Luisa Herrmann, Head of Product for Arch Systems, is helping to transform "big data" into useful data. Luisa has 10 years of experience in Product Management and Product Marketing, launching products, building teams, and scaling organizations in the data software space. She was most recently the Head of Product at Cape Privacy, an encrypted machine learning company, and before that she was the Head of Product at expert.ai, an NLP company. She has a degree in Chemical Engineering from the University of Pennsylvania and lives in the Boston area.

Luisa Herrmann may be contacted here:
[email protected]
https://archsys.io/

On this show, we’ve discussed many aspects of the Electronics assembly process. We talked about reflow, thermal management, printing, soldering materials, additives, and so much more. What do all these topics have in common? When done correctly, they all contribute to the reliability of circuit assemblies.

Today, we’re going to dive into the subject of cleaning circuit assemblies after reflow. For many assemblers, the cleaning process was replaced by the use of no clean flux technology. Time and technology have eroded the concept of allowing all residues to remain on the assembly. Today, residue caused failures are such a concern, that IPC recently and radically changed the way circuit assemblies are considered to be clean.

My guests today are Sal Sparacino and Eric Camden. Sal is Director of Sales at Zestron Americas, located in Manassas Virginia. Zestron is a manufacturer of cleaning chemicals for the electronics industry. Eric is Lead Investigator for Foresite, an analytical laboratory based in Kokomo Indiana. Eric, is the guy you call when things go wrong. Together with my experience as a cleaning equipment manufacturer, we’ll discuss how cleaning contributes to increased reliability, and we’ll review the reasons cleaning has returned as a mainstream assembly process.

Guest Contact Info:
Sal Sparacino
[email protected]
https://www.zestron.com

Eric Camden
[email protected]
https://www.foresiteinc.com

Episode 113: A Conversation about Counterfeit Component Detection with Dr. Eyal Weiss

We are all aware of the “oldest profession in the world”. Perhaps the second oldest profession is counterfeiting. Whenever a product is introduced, a counterfeit version soon follows. While the electronics industry has experienced counterfeit components from its inception, recent events such as the pandemic and supply chain shortages have fueled the counterfeit industry.

Statistics by the Semiconductor Industry Association (SIA) reveal that the counterfeiting of electronic parts in the US alone, cost the chip industry more than $7.5 billion in revenue annually. According to new data from the ERAI, a global information board for counterfeiting, reports of counterfeit electronic products are growing. Although it is difficult to put an exact figure on just how many counterfeit products are in circulation, estimates suggest that consumer and industrial businesses lose approximately $250 billion each year due to counterfeit parts.

To talk more about counterfeit components and detection technologies, I invited Dr. Eyal Weiss, Founder and CTO of Cybord to be my guest. Dr. Weiss received his Ph.D. in Electronic and Computer Engineering from BGU (Ben-Gurion University) in Israel
As well as a Masters in Plasma Physics and bachelors cum laude in Mechanical Engineering from the Technion–Israel Institute of Technology.

He worked as a researcher on pulsed plasma at Soreq Research Center (SNRC). He then worked as a technology department manager in the high-tech fiber-optics industry. He was the technology manager at Lynx Photonics and then at Explay, developing state-of-the-art Silicon and optical chips production, packaging, and assembly production lines. He developed a new fiber-pigtailing and packaging technology and built full-scale production lines utilizing this new technology.

He returned to Soreq SNRC and for 15 years served as manager and leading scientist of the R&D Systems Department. He built mass-production lines and assembly lines for new sensors technology and developed their test equipment. He has twice received the prestigious Israel Defense Prize.

In 2018, he founded and became CTO of Cybord, developing electronic component qualification and authentication technologies. He is a member of the Israel Innovation Authority, Euramet, SAE, and IPC committees. He specializes in multidisciplinary technology development and has received significant awards and accolades in the fields of machine learning, plasma physics, optical assemblies, laser technology, and electromagnetics.

Dr. Weiss is an expert in technology development and manufacturing technology and has published over 20 peer-review articles, 4 patents, and a book, and, I’m happy to say, he’s my guest on this episode of the Reliability Matters podcast.

Contact Eyal Weiss:[email protected]
https://cybord.ai

David Raby is President of Madison Alabama-based STI Electronics, a contract manufacturer for the EMS industry. David worked at the family business since he was a child and eventually took over the family business when his father (and company founder) Jim Raby retired.

The electronics industry moves at the speed of light and any business within the EMS industry must learn to stay ahead of technology and trends. David shares some of his experiences in taking over the family business and some of the challenges his business (and many other businesses) face on a near daily basis.

David Raby's Contact Information:
[email protected]
https://stiusa.com

Electricity is the life blood for all circuit assemblies. It can also afflict significant damage via electrostatic discharge. My guest, Christopher Almeras of Raytheon reviews the various ESD mitigation strategies as well as some ESD horror stories!

Christopher Almeras began his career in process engineering for a small electronics manufacturer in the late 1990s. There he became responsible for the sites ESD compliance verification. His next career move took him to a high-volume manufacturer where he added ESD Coordinator to his process duties. He eventually made the jump into the Military/Aerospace side of electronics manufacturing (with Raytheon) in 2010 where he has remained working in process, capital installations, continuous improvement, and ESD.

In 2009, Christopher completed his ESD Certified Program Manager from the ESDA. He serves as a member on several ESD Association standards committees including S20.20, TR53, Process Assessment, High Reliability, Electrostatic Attraction among others. In 2022 he took over the working group chair for Soldering/Desoldering Hand Tools.

Christopher was elected to the ESD Association Board of Directors and continues to be active with the ESD Symposium each year. In 2018 he presented his technical paper “An ESD Case Study of Defect Analysis in High Speed Electronics Manufacturing” at the symposium.

Christopher earned a BS in Mechanical Engineering from Purdue University and an MS in Industrial Engineering from Oklahoma State University. He is an
ESD Certified Program Manager (ESDA).

Christopher may be contacted here:
[email protected]
https://www.lonestaresd.com

During this episode, I referenced the following:
Reliability Matters Episode 104: A Conversation about ESD Flooring with Thomas Ricciardelli
https://youtu.be/peyNVuE7Ink

4 Easy Ways to BLOW UP Your Test Gear
Daniel Bogdanoff - Keysight
https://www.youtube.com/watch?v=dDvue5whx0s

Historically, circuit assemblies are rigid devices. IoT (Internet of Things) has opened up the opportunity to embed electronics into a near limitless array of form factors. Some of these form factors require the electronic assembly to be flexible such as in wearable and medical applications.

To complicate matters, The metal conductors on the assembly are rigid, and not flexible or malleable. That may change with the adoption of liquid metals. We were all exposed to the concept of liquid metal in the 1991 film Terminator 2. Will science fiction become reality?

My guest today is Dr. Michael Dickey. Michael is currently the Camille and Henry Dreyfus Professor in the Department of Chemical & Biomolecular Engineering at NC State University.

Michael Dickey received a BS in Chemical Engineering from Georgia Institute of Technology and a PhD from the University of Texas. From 2006-2008 he was a post-doctoral fellow in the lab of Professor George Whitesides at Harvard University. Michael completed a sabbatical at Microsoft in 2016. Michael’s research interests include soft matter (liquid metals, gels and polymers) for soft and stretchable devices (electronics, energy harvesters, textiles, and soft robotics), and hopefully, for the sake of humanity, not liquid metal T1000 villains.

Dr. Michael Dickey's Contact Information:
[email protected]

Link to Michael Dickey's TED-X Talk:
https://www.youtube.com/watch?v=lfUnK_rME8E

On this episode, there are no guests, and no specific topics. I would like to use this opportunity to thank my guests, our syndication partners, and, of course, my audience for making this podcast so successful. We have a full season ahead in 2023 and I'm excited to share those episodes with you. Please keep your questions and topics suggestions coming. Send them to [email protected].

A huge shout-out to my 2022 guests:
Joel Scutchfield
Brian O'Leary
Tony Lentz
Mike Adamson
Greg Papandrew
Kevin Huo
Michelle Ogihara
Marco Sanchez
Colin Harper
Dr. Kunal Shah
Dr. Ron Laskey
Jim Hall
Claire Hotvedt
Tom Watson
Phil Zarrow
Keith Bryant
Dr. David Bernard
David Kruidhof
Robert Boguski
Jen Fijalkowski
Graham Naisbitt
Matt Kelly
David Raby
Ed Stone
Thomas Ricciardelli
Dr. Martin Anselm
Julie Silk
Raiyo Aspandiar
David Greenman
Michael Mchale
Randy Cherry
Dr. Chuck Bauer
David Graham

Industry 4.0, the fourth industrial revolution. Beyond the buzzwords, what does this mean? My guest today is David Graham, Chief Technology Officer of 4IR.UK, a wholly owned subsidiary of Internet of Things focused, British Systems.

4IR.UK specializes in creating Monitoring, Control and Automation solutions, often based on the MultiPlug Edge Computing Platform, for manufacturing environments. They also provide consultancy and development for other Industry 4.0 platforms.

I was intrigued by a webinar presented by David entitled “A Decade of Industry 4.0 – What it Wasn’t, What it Was", and today, I spoke with David about his thoughts, experiences, and opinions of Industry 4.0.

David's Contact Info:
David Graham
[email protected]
www.4ir.uk

Welcome back to another episode of the reliability matters podcast. For those who are counting, this is episode number 108. SMTA is well known for producing high-quality relevant technical conferences and symposiums. This includes, among others, the technical conference held at SMTAI, the High reliability cleaning and coating conference, the symposium on counterfeit parts and materials, the Advanced Electronics Assembly Conference, the Wafer-Level Packaging Symposium, the Electronics in harsh environments conference, and, perhaps my favorite, the Pan Pacific microelectronics symposium, often referred to as PanPac.

PanPac is unique in many ways beginning with its venue. PanPac is held annually at one of the Hawaiian islands. This fact alone makes this symposium stand out. But there are many other factors that make this symposium unique. Let me quote from PanPac’s steering committee:

The Pan Pacific Microelectronics Symposium strives to build bridges and nurture relationships across all boundaries; oceans and cultures, industries and technologies, companies and individuals. Its location in Hawaii always provides the requisite isolation from day to day distractions necessary to support these goals and enhance personal face to face interactions. The Pan Pacific continues its mission of building the vision and future directions for the electronics industry!

PanPac 2023 is scheduled for January 30 - February 2, 2023
At the Sheraton Kauai Resort on the beautiful island of Kauai.

While I love attending technical conferences and symposiums just for the educational opportunity, PanPac there’s just something special about this conference. While all conferences provide an element of networking, I have forged many new relationships, friendships, and collaborative agreements with fellow attendees and speakers. Perhaps it has something to do with being on a tropical island for a few days with like-minded people. To talk more about the upcoming Pan Pacific microelectronics symposium, I invited to colleagues who are instrumental in curating the technical contact for this symposium. Dr. Chuck Bauer, one of the original creators of this symposium and Keith Bryant join me to discuss the conferences technical tracks and
presentations as well as their view on what makes this conference unique.

More Information:
https://smta.org/mpage/panpac/

Like most manufacturers, the electronic manufacturing industry relies on countless suppliers to fulfill its manufacturing needs. I'm quite certain there is no one within the EMS space who fabricates their own boards using materials produced in house, operates their own semiconductor foundries, designs and manufacturers their own components, and produces soldering materials for their reflow process. Our industry relies on a vast network of manufacturers throughout the world to build even the simplest electronic assembly.

Intellectual property security, cyber security, national security, are all hot topics today. No one wants their hard-earned intellectual property stolen. This is most true within The US military establishment. There are, at present, numerous policies, procedures, and regulations designed to protect various parts of our supply chain from unscrupulous people and companies.

Today, companies are concerned about “controlled unclassified information” (CUI) and “controlled technical information” (CTI). That brings us to IPC-1791. What is IPC-1791? My guest today, IPC’s Randy Cherry will explain.

Randy is Director of Validation Services at IPC. Validation Services is a series of certification programs that qualify products and processes to the IPC industry standards.

Once companies have completed their certification they are listed as an IPC Trusted Supplier on the IPC Validation Services website.

Randy has over 30 years experience in Engineering with Printed Circuit Board and Backplane fabs, High-Speed Pressfit Backplane Connectors, and SMT (Surface Mount Technology) Assembly practices. He is a certified SMT Process Engineer and an IPC Auditor, and, he's my guest today on this episode.

Randy's Contact Info:
Randy Cherry | Director, Validation Services
IPC
3000 Lakeside Drive, Suite 105 N,
Bannockburn, IL 60015
Office: +1 847-597-2806
Mobile: +1 630-470-4721
[email protected]
www.ipc.org
www.ipc.org/validation