RetroRGB

RetroRGB

By RetroRGBTechnology
Download on the App Store

RetroRGB episodes

  • CRT vs Projectors With Cousin Scott

    I recently sat down with Scott to discuss how some types of 480i and 480p content looks on CRT's and projectors.  Unlike almost everything else we do on RetroRGB, this conversation is 100% speculation, with no comparison footage or facts to back it up.  It's legit just a podcast of us talking about what types of content we want to watch in 480i on a consumer TV, 480p on a BVM (or VGA monitor), or modern projector.  And oddly enough, I think most people will enjoy it:  Just think of this as a primer to get your started running your own experiments and seeing what you prefer best.  As always, these long-form podcasts are also available as a video, with links on the main page:  https://www.retrorgb.com/crt-vs-projectors-with-cousin-scott.html

    There's one thing we didn't try that I thought of afterwards:  Those cheap HDMI to composite converters.  Now, please note those are not recommended for gaming, as they output 480i and have quite a few frames of lag.  If you wanted to run some of these experiments yourself, for $15, this might be a fun thing to buy...just please don't use it for gaming ;p  https://amzn.to/3KsERcY

    Also, Scott asked that I leave some notes / corrections for things we discussed:

    • The capture format for Shaka Zulu was 35mm, not 16mm as I postulated.
    • I described the honeymooners as being archived by shooting a screen running an old ‘vitaphone’ video image. This is incorrect. This is actually the way they shot a lot of old ‘kinescope’ tv content of the era, but Jackie Gleason actually used a new contraption at the time, an electronicam, that used a beam splitter during image capture to simultaneously record the image on both kinescope tape and film at the same time, resulting in a much higher quality archival asset.
    • The Dr. Stranglelove 4K aspect ratio is actually 1.66, not 1.7. Still wider than the 1.33 academy square aspect you thought it was, but I have been criticized before for rounding up 1.66 to 1.7, so better to be clear. As a matter of incident, the question of strangelove’s aspect is a pretty deep subject in film lore. It was shot in multiple aspect ratios (1.33 and 1.66) and released theatrically at 1.85, but Kubrick was always unhappy about that. There is an old dvd of stranglelove where different scenes have different aspects, and they switch on the fly (kind of like the films with parts shot for imax), but it seems now that everyone has agreed that 1.66 was the intended format.
    • Please consider supporting this channel via monthly support services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      T-Shirts:  https://www.retrorgb.com/store.html

      All equipment used to shoot this video can be found here: https://www.amazon.com/shop/retrorgb

      1 hr 6 min
    • Supporter Q&A #202

      Here's the Supporter Q&A from April 7th, 2022. All comments and questions are fielded through the support service Q&A page.   Please consider supporting this channel via monthly services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      View this as a video:  https://www.youtube.com/retrorgb

      Amazon Links to products I use: https://www.amazon.com/shop/retrorgb

      T-Shirts & Stuff: https://www.retrorgb.com/store.html

      TIMESTAMPS (please assume all links are affiliate links):

      00:00  Whatnot stream w/Tito from Macho Nacho this Friday at 6PM NYC time:  http://retrorgb.link/whatnot

      00:27  720p Plasma for Xbox 360

      04:01  Xbox 360 via component, through a Crosspoint, into an ADC for HDMI

      06:33  Why do some CRT’s have more or less of a color?  /  DIY USB Power Charger  /  1440p on a CRT

      12:49  Using a PC for emulation on a 15KHz CRT

      22:03  Will ROM carts ever have emulation-like UI’s?

      24:51  Using an RPi for 480i TV & Movies

      27:50  Powering off a RPi emulation solution without a soft shutdown.

      31:16  Differences in setting up JAMMA on MiSTer vs other options:  https://youtu.be/rmassx9hJP8

      35:05  Trouble with a 1CHIP-03 RGB bypass

      40:11  AC coupling caps?

      42:27  Will a 4-Score adapter work via SNAC in the NES core?

      44:48  Dedicated low-pass filter devices?

      48:50  PS2 OPL storage options

      51:25  Safe retrobright options

      57:50  Xbox 360 SCART through crosspoint / Can you get 480i from a 360 via the official VGA cable?

      1:00:05  Is it safe to feed a Panasonic Plasma 120Hz?  It works, but it is safe…and is it actually processing 120Hz, or just dropping half the frames to 60?

      1:02:40  Support the channel / new questions:  https://www.retrorgb.com/support.html

      1 hr 4 min
    • Weekly Roundup #299

      This week's podcast is sponsored by JLCPCB!  Spend only $2 for 5pcs  1-4 layer PCBs ; PCBA from $0: https://jlcpcb.com/DRE

      Please consider supporting this channel via monthly support services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      More info & link to video version: http://retrorgb.com/week299.html

      T-Shirts:  https://retrorgb.link/tshirts

      All equipment used to shoot this video can be found here:  http://retrorgb.link/amazon

      00:00  Thank you!:  http://retrorgb.link/whatnot

      00:37  PlayStation Plus 2022 Explained:  https://www.retrorgb.com/playstation-plus-2022-edition-announced.html

      04:07  JLCPCB: Ordering whatever’s not available cause of the part shortage (sponsored segment)

      07:00  MiSTer Deep Dive:  https://www.retrorgb.com/massive-2022-primer-video-on-mister-fpga.html

      08:18  MiSTer in 10-minutes!:  https://www.retrorgb.com/mister-getting-started-in-under-10-minutes.html

      11:42  Digital Sega Soundtracks:  https://www.retrorgb.com/classic-sega-soundtracks-released-digitally.html

      13:20  RPi4 Software Choices:  https://www.retrorgb.com/rpi4-raspberry-pi-software-for-2022.html

      21:21  Astebros Interview:  https://www.retrorgb.com/astebros-interview-a-new-game-for-the-sega-genesis-mega-drive.html

      22:18  Interview With Scarlet Sprites:  https://www.retrorgb.com/interview-with-scarlet-sprites.html

      23:27  Lu’s Weekly MiSTer News:  https://www.retrorgb.com/mister-fpga-news-updates-joust-2-konamis-ping-pong-and-more.html

      29:35  MemCard Pro Case:  https://www.retrorgb.com/memcard-pro-hard-case-by-laser-bear-industries.html

      30:35  Sonic 2 Spoiler-Free Review:  https://www.retrorgb.com/sonic-the-hedgehog-2-movie-review-no-spoilers.html

      32:19  Whatnot stream featuring Macho Nacho:  http://retrorgb.link/whatnot

      35:35  I’ll be at the Retro Game Festival in Sao Paulo Brazil on May 27th and 28th!: https://youtu.be/ClTPV0sY14w

      Tickets:  https://www.eventbrite.com.br/e/festival-retro-games-brasil-2022-tickets-312485611877
      Facebook: https://facebook.com/FestivalRGB
      Instagram: https://www.instagram.com/festivalretrogamesbrasil/

      39 min
    • Interview With: Scarlet Sprites

      This week's podcast is a chat with Joe, aka Scarlet Sprites.  I've been a fan of Joe's YouTube channel for awhile now and it was fun getting to know him better.  Grab your favorite drink of choice and come hang out with us for a bit!  As always, these long-form podcasts are also available as a video, with links on the main page:  https://www.retrorgb.com/interview-with-scarlet-sprites.html

      Here's where to find Joe:

      https://www.youtube.com/ScarletSprites
      https://twitter.com/ScarletSprites
      https://www.instagram.com/scarletsprites/
      https://www.facebook.com/ScarletSprites/

      This podcast was recorded using Riverside. Check out their awesome platform, with monthly service starting at less than $10! - Use coupon code RetroRGB30 for a 30% discount on the first three months (or yearly) subscription: https://retrorgb.link/riverside

      Please consider supporting this channel via monthly support services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      T-Shirts:  https://www.retrorgb.com/store.html

      All equipment used to shoot this video can be found here: https://www.amazon.com/shop/retrorgb

      1 hr 29 min
    • Supporter Q&A #201

      Here's the Supporter Q&A from March 31st, 2022. All comments and questions are fielded through the support service Q&A page.   Please consider supporting this channel via monthly services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      View this as a video:  https://www.youtube.com/retrorgb

      Amazon Links to products I use: https://www.amazon.com/shop/retrorgb

      T-Shirts & Stuff: https://www.retrorgb.com/store.html

      TIMESTAMPS (please assume all links are affiliate links):

      00:00  Hello!

      00:50  How does it feel to hit 200?

      02:29  What monitor to use with an Xbox 360?

      06:45  Model 1 Saturn in a model 2 shell, Swiss force 480p, 32x w Everdrive Pro SCD

      11:40  Ad suggestions and chapter marks

      15:44  How to know if a product is a clone?

      22:15  Can the RT5x auto-power off?

      23:13  XStation + original drive?

      25:43  CRT RGB mod mux board

      27:53  More colors for replacement shells, RAD2x into RT5x?  https://retrorgb.link/cheapdac

      33:32  Backup N64 game saves from the cartridge?:  https://youtu.be/k_aNSev7Y0M

      36:29  Region mod, or buy PAL + NTSC consoles?  Triad PSU’s for international consoles:  https://www.retrorgb.com/triad.html

      40:27  Whatnot “creator’s” stream Friday at 6:30PM NYC time:  http://retrorgb.link/whatnot

      43 min
    • Weekly Roundup #298

      This week's podcast is sponsored by JLCPCB!  Spend only $2 for 5pcs  1-4 layer PCBs ; PCBA from $0: https://jlcpcb.com/DRE

      Please consider supporting this channel via monthly support services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      More info & link to video version: http://retrorgb.com/week298.html

      T-Shirts:  https://retrorgb.link/tshirts

      All equipment used to shoot this video can be found here:  http://retrorgb.link/amazon

      00:00  Welcome

      00:44  VB Racer adds link play:  https://www.retrorgb.com/elevate-speed-adds-link-play.html

      02:38  JLCPCB’s BOM import and sourcing (sponsored post)

      06:16  Awesome Nomad Mod:  https://www.retrorgb.com/new-incredibly-capable-mod-kit-for-the-sega-nomad.html

      12:16  Electronic VGM DJ:  https://www.retrorgb.com/dedeco-is-djing-mixes-that-highlight-electronic-vgm.html

      13:40  Save File Converter:  https://www.retrorgb.com/save-file-converter.html

      15:49  Mythbusting Display Lag:  https://www.retrorgb.com/mythbusting-display-lag.html

      Display Lag Podcast:  https://www.retrorgb.com/talking-display-lag-with-nick-zach.html

      19:22  Lu’s MiSTer Updates:  https://www.retrorgb.com/mister-fpga-news-updates-new-cores-nes-mappers-help-system-and-more.html

      22:36  WASCA Cart Updated:  https://www.retrorgb.com/wasca-cart-migrates-to-faster-architecture.html

      26:10  Whatnot stream & “Pay Retail” event:  http://retrorgb.link/whatnot

      35 min
    • Talking Display Lag with Nick & Zach

      This week's podcast is an open discussion about display lag, featuring Nick from HD Retrovision and Zach aka Voultar.  We discussed some of the findings and questions left unanswered from my latest video "Mythbusting Display Lag", which itself is a culmination of over ten years of testing.  Hopefully we helped make things easier to understand, while also setting clear next steps for a follow up.  As always, these long-form podcasts are also available as a video, with links on the main page:  https://www.retrorgb.com/talking-display-lag-with-nick-zach.html

      Mythbusting Display Lag:  https://www.retrorgb.com/mythbusting-display-lag.html

      HD Retrovision:  https://www.hdretrovision.com/
      Voultar:  https://www.voultar.com/

      This podcast was recorded using Riverside. Check out their awesome platform, with monthly service starting at less than $10! - Use coupon code RetroRGB30 for a 30% discount on the first three months (or yearly) subscription: https://retrorgb.link/riverside

      Please consider supporting this channel via monthly support services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      T-Shirts:  https://www.retrorgb.com/store.html

      All equipment used to shoot this video can be found here: https://www.amazon.com/shop/retrorgb

      1 hr 21 min
    • Supporter Q&A #200 Live!

      Here's the LIVE Supporter-only Q&A from March 25th, 2022!  I thought it would be fun to celebrate the 200th Q&A podcast by doing it live, warts and all.  I'll be back to normal next week, but hopefully this one was still fun!

      All comments and questions are fielded through the support service Q&A page.   Please consider supporting this channel via monthly services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      View this as a video:  https://www.youtube.com/retrorgb

      Amazon Links to products I use: https://www.amazon.com/shop/retrorgb

      T-Shirts & Stuff: https://www.retrorgb.com/store.html

      1 hr 53 min
    • Weekly Roundup #297

      This week's podcast is sponsored by JLCPCB!  Spend only $2 for 5pcs  1-4 layer PCBs ; PCBA from $0: https://jlcpcb.com/DRE

      Please consider supporting this channel via monthly support services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      More info & link to video version: http://retrorgb.com/week297.html

      T-Shirts:  https://retrorgb.link/tshirts

      All equipment used to shoot this video can be found here:  http://retrorgb.link/amazon

      00:00  Welcome

      01:01  USB2PCE:  https://www.retrorgb.com/usb-2-pce-8bitdo-pce-wireless-controller-dongle-pre-order.html

      03:34  Ordering PCBA from JLCPCB (sponsored post)

      05:43  WASCA Saturn Cart:  https://www.retrorgb.com/saturn-wasca-cart-runs-heart-of-darkness-proto-hints-at-greater-potential.html

      09:21  Genesis to USB Controller Adapters:  https://www.retrorgb.com/laser-bit-genesis-to-usb-controller-adapters-pre-orders-open.html

      11:06  Tokimeki Memorial Complete English translation:  https://www.retrorgb.com/tokimeki-memorial-finally-receives-a-complete-english-translation.html

      12:35  EmuVR:  https://www.retrorgb.com/emuvr-free-immersive-and-nostalgic-emulation-with-online-multiplayer.html

      14:58  Saturn Switcher:  https://www.retrorgb.com/saturnswitcher-ode-pre-sale.html

      17:50  Interview With Calamity:  https://www.retrorgb.com/interview-with-calamity.html

      19:35  Lu’s MiSTer Updates:  https://www.retrorgb.com/mister-fpga-updates-psx-widescreen-nemesis-core-road-fighter-core-and-more.html

      26 min
    • Interview With Calamity

      If you've ever tried to get a PC working in 240p on an RGB monitor, you've surely stumbled across the work of Calamity - An awesome member of the retro gaming scene who's been helping us get MAME PC's working on 15KHz RGB monitors for over ten years!  While everything needed to make this happen is the result of many people in the scene coming together, Calamity's posts have been helping me since pre-RetroRGB days and I really wanted to have a chat with him!  As always, these long-form podcasts are also available as a video, with links on the main page:  https://www.retrorgb.com/interview-with-calamity.html

      Arcade Controls / BYOAC:  http://forum.arcadecontrols.com/

      This podcast was recorded using Riverside. Check out their awesome platform, with monthly service starting at less than $10! - Use coupon code RetroRGB30 for a 30% discount on the first three months (or yearly) subscription: https://retrorgb.link/riverside

      Please consider supporting this channel via monthly support services, tips, or even just by using our affiliate links to purchase things you were already going to buy anyway, at no extra cost to you:  https://www.retrorgb.com/support.html

      T-Shirts:  https://www.retrorgb.com/store.html

      All equipment used to shoot this video can be found here: https://www.amazon.com/shop/retrorgb

      1 hr 26 min

    About RetroRGB

    From the publisher's feed

    Retro-gaming news, interviews, nerdversations and more!