The Amp Hour

The Amp Hour

By The Amp Hour (Chris Gammell and David L Jones)ScienceTechnologyEducationHow ToPhysics
Download on the App Store
  • Ranking

    11th

    on Physics

  • Favorites

    65

    Followers

  • Latest release

    10 days ago

  • Typical duration

    64 min

    per episode

Based on Podcast App listening data

All The Amp Hour episodes

  • The RP1 and beyond with the Raspberry Pi Hardware team

    Welcome back James Adams and Liam Fraser

    • The RP1 is the new custom silicon on the Raspberry Pi 5 that is the helper chip to the Broadcom part onboard
    • The HW team was last on the show in 2021 talking about the RP2040
    • They have been working on the RP1 since 2015
    • It's a small team, especially compared to other companies doing custom silicon.
    • RP2040 update
    • Scripting to reconfigure the silicon clocks/blocks
    • Are they making other chips?
    • Divvy-ing up duties for silicon
    • Broadcom is making the processor and took input for this latest
    • Dialog/Renesas do the power chip on the RPi5
    • PIO
    • Chris gave an example of a board (the Ostentus) where the PIO is just listening for i2c messages and passing them up the stack.
    • Design goal was to do cycle by cycle processing
    • Someone on twitter having PIO talking to fiber transceivers
    • Sourcing and RP2040 availability
    • They get 20000 chips per wafer
    • Buying wafers a few at a time through IMEC, sometimes through TSMC directly
    • There are often small amounts of availability of "wafer starts"
    • TSMC40
    • IP block updates: USB 3 / Ethernet
    • Can do diffs on the verilog
    • Receiving high paid IP
    • Liam is the sysadmin / servers are on site
    • Buying from Synopsis
    • Stitching together IP
    • They list what version of the IP they're using in the various sections of the datasheet.
    • Prototyping on FPGAs
    • Controller and Phy interface are exposed
    • ProFPGA system with daughtercards
    • Can't run at full clock speed on FPGA
    • Digital vs analog simulation
    • Could someone (competitors) copy things?
    • As open as possible, being open where it provides value
    • Cost savings on the RP2040
    • Traditionally the "Southbridge" is the IO hub for computing, the Northbridge was the cache/memory (later subsumed into large CPUs)
    • 2712 on RPi is 16 nm
    • This model of creating different generations of silicon but putting them all together is similar to chiplets but...on a PCB
    • There is a (hidden-ish) PIO in the RP1.
    • There will be more processing delays in RPI5 to deal with, but they won't be noticable because Linux is already pretty not-real-time
    • Hoovering up more functions in one chip
    • Layout of connectors changed again
    • Pins are created to be well laid out on the PCB
    • RISC V foundation
    • The stack / ecosystem isnt as mature
    • James' signature is under the USB3 connector
    • RPi5 is "the most raspberry pi raspberry pi" yet
    • 1 hr 10 min
    • Fan Fanboys
      • Chris is out of stock on Tindie and will no longer be a seller (though he was barely one to start with). Props to all the sellers out there!
      • Media mail is a low cost post option in the US
      • Colin Mitchell allowed people to pay with stamps instead of money orders back in the day
      • There is always a struggle for hardware engineers to price a product at the value in the marketplace and not just the cost of parts
      • Teardown of DHO800
      • Heatsink testing (live during the show)
      • CFD
      • Controlled depth routing
      • We discussed Joe Grand's thin boombox last time, Dave watched a talk where he explained more of the process
      • Scotty from Strange Parts did an awesome tour of the JLC PCB Flex factory
      • Skewed expectations
      • Dave was wondering why during the production assembly of scope that they populated caps but not silicon
      • Intel is investing in ARM, RISC V (say what now?)
      • eBay U1273A meter
      • Old stock
      • 30 year old tek chips
      • 1 hr 4 min
      • Moving Down The Stack with Scott Williams

        Welcome back, Scott Williams of Xentronics!

        • Scott was on Episode 624 talking to Dave about the business of consulting, but they discussed Scott coming back on to get more into the technical side of things.
        • Chris listened to the episode and wondered if Scott would get more pulled into management of the day-to-day
        • There's a new program in Victoria (Australia) to enforce deposit/rebates on bottles and cans. This opened up an opportunity for an electronics project.
        • Bin management is another common IoT project
        • Industrial - Site Hive is a long-time customer in the construction space
        • Consumer goods
        • Scott said he's likely to reach for a Raspberry Pi CM4 for quick prototyping/POC
        • Wht about the high density Hirose connectors?
        • Does Xentronics "go down the stack" by using tools like Buildroot / Yocto?
        • Cameras make products much more difficult. Raspberry Pi cameras have a CSI interface but aren't "standard" per se.
        • When starting projects, Xentronics is likely to pull out ESP32 for WiFi, Nordic for Bluetooth, STM32 for generic processing
        • Bare metal vs RTOS? Normally they start in the RTOS space to add things later
        • Pre-made / prior art
        • Colin Karpfinger of Punch Through, a firm that largely focuses on Bluetooth
        • EMC resources/courses
          • PCEA educational EMC
          • Todd Hubing
          • Keith Armstrong
          • Ken Wyatt
          • Wurth seminar - Scott never got the recording, but will try again and we'll update here/reddit if he gets it!
          • 1 hr 23 min
          • Garbage Ninjas
            • Chris joined the 2010s and got a step tracker, the Fitbit Inspire 3
            • There are commercially available teardown reports you can buy
            • One of the sensors on board is well supported in Zephyr. This influences how Chris chooses parts.
            • The RT500 (discussed by Aeden in episode 638) is supported in Zephyr and targets the smart watch industry
            • Kalman filters are pretty amazing
            • Dave blew out his other knee (!) and went to go see a Podiatry specialist to get his gait analyzed. He has "impressively flexible feet"
            • Dave did a teardown of the classic Boombox from Say Anything
            • Joe Grand made "The World's Flattest Boombox" to showcase a piezo speaker. It was a really cool PCB!
            • Joe Grand was also on The Amp Hour (twice!)
              • Episode 60, one of our earliest guests
              • Episode 575 in early 2022 when Joe was hacking on Trezor wallets
              • eBay
              • Garbage ninjas
              • Recycling electronics
              • uSupply video
              • Part number stuff
              • Chris has been putting a design through Macrofab. Chris and Parker were on episode 243.
              • Tempo automation has maybe (probably?) shut down. There was a weird email that Chris shared. After the show, Chris found a post about how they're down to 7 employees, so probably aren't manufacturing any boards...
              • Making a RISC V processor in 100 lines of Verilog!
              • 1 hr 3 min
              • Calibration & Repair with Ian Johnston

                Dave and Ian Scott Johnston discuss the PDVS2mini DC Voltage Calibrator Source, production, China, CERN, ebay reselling, test gear, pick and place machines, assembly, automated test systems, and Youtube repair videos.

                https://www.youtube.com/@UCtiK8QrcCrsjDXpKzB1PO1A

                https://www.ianjohnston.com/

                1 hr 10 min
              • Sad Violins for Superconductors
                • Chris is developing a booming "dad" voice, perhaps?
                • Memorizing modem sounds
                • The Amp Hour turned 13 years old (episode 1 went out Aug 12th, 2010)
                • The Fluke 87 is 35 years old
                • Everyday DMMs
                • Chris enjoyed Dave and Toby discussing the DMM a lineman uses
                • Bryman
                • Dave will be giving a talk at a University sooon...should he dress up like Bob Pease, the Czar of Bandgaps?
                • Dave made a video about one of the LK99 groups
                • What are the practical limits of superconductors?
                • Meissner effect is how superconductors levitate
                • Maglev trains
                • Trains on YouTube
                • Chris is working on a new board, the first time in a while
                • Abandoned scooters around Seattle have RPi4s in them
                • How did the 2n2222 get its name?
                • A new group of semiconductor companies (Bosch, Infineon, Nordic, NXP, and Qualcomm) join forces on RISC V
                • Former guest Mike Engelhardt releases a new spice version with Qorvo called QSPICE
                • 1 hr 8 min
                • Power Transmission with Toby Robb

                  Fellow Aussie Toby Robb joins Dave to discuss everything related to mains power generation and transmission and his role as a linesman.

                  Ask Toby a question here:

                  https://www.eevblog.com/forum/amphour/im-linesman-and-electrical-fitter-in-powerline-distribution-in-australia-ama/

                  Links:

                  TransGrid’s substation design standard https://www.transgrid.com.au/media/zgogqoqg/1-1-substation-primary-design-standard-rev-2.pdf

                  https://www.energy.nsw.gov.au/sites/default/files/2022-08/2019_10_NSW_ServiceAndInstallationRulesOfNSW_underlined.pdf

                  1 hr 13 min
                • Software Defined Power Supplies with Werner Johansson

                  Welcome Werner Johansson of Qoitech!

                  • Chris and Werner met when Werner gave a talk at HDDG in 2017
                  • The talk focused on Xmega parts, which have a 2 Msps ADC
                  • Qoitech is a Sony spinoff, where Werner was working on testing batteries on the cellphones.He had previously also worked on automation during linux mainline work.
                  • Serial port control is an important thing when doing automated testing
                  • CDB assist
                  • PSOC5-LP has a CPLD in it
                  • The Otii Arc was the first product from Qoitech, it's a 2 quandrant power supply. They started in 2015/2016.
                  • Chris asked if Werner had previously had used the Keithley 2306
                  • Field testing is an imporant area for the Otii product line. "Measuremenets on the go" are easier with the extruded case form factor.
                  • No computer will give you USB PD output power of more than 15W. Test equipment would benefit from a full 200W
                  • Analyzer (Twinkie?)
                  • A hub might be possible
                  • USB Extended Power Range (EPR) will allow 240W
                  • Are you  sure you should plug that into your computer? Reminder about the OMG cable discussed on the show with MG
                  • New EPR at 48V has specific shape for arcing
                  • When designing a power supply for tattoo machine, it could only weigh half the weight of the cable (64g)
                  • Software defined buck boost was discussed on CNLohr episode
                  • Digital control is easier to get stable than analog because of programmable delays in the pipeline. You need to measure how long it takes to get the output to "show up"
                  • Audio project real time jam sessions
                  • The new product from Qoitech (that Chris got to see at Embedded World in 2023) is the Otii Ace
                  • PJRC convinced Werner to check out the NXP RT106x family (instead of RT105x)
                  • Otii is working on battery stuff
                  • Arc has been out since 2017, but was limited output voltages 500 mv - 5V
                  • Ace came out recently and goes up to 25V at 5A
                  • 3 isolation domains in Ace - chassis, banana jacks, expansion ports
                  • Want resistor on low side for coloumb counter
                  • Can stack Aces up to 200V
                  • Dealing with RFI when different domains
                  • Increased sample rate
                  • 8 simultaneous sampled ADCs
                  • Turns readings into audio signals for RT1060, which allows data to stream easier
                  • There is one reference voltage driving everything in the design, they send frequency spike across gaps to all isolated sections using RF isolators
                  • Hard time getting the RT1060 parts during shortage
                  • Battery stuff
                  • Stepping through the battery internal resistance
                  • Edging into the world of SMUs
                  • Building a curve
                  • Replaying battery data
                  • Battery emulation
                  • Continuous integration testing
                  • Syncing to firmware
                  • Battery aging
                  • Devices running on coin cells
                  • Cycling and automated testing and see it degrade over time
                  • Thinking of batteries as impedance devices
                  • Batteries having a passivation layer
                  • "Low power" means different things to different people
                  • Teardown of battery emulator
                  • Low power is less than 200W
                  • Qoitech equipment has been used in testing and production, including "in-the-loop" testing
                  • "Generational degrade" when using previous versions of the product to validate new versions of the product. Instead they have a NIST traceable DMM in the loop
                  • Chris mentions ever calibration shop has a Fluke calibrator. Apparently the HP 8753 wasn't available in EU because of RoHS.
                  • To learn more about Werner and the Qoitech team, check out the Otii Ace page
                  • 1 hr 12 min
                  • Daaaamn We're Duuuummmb
                    • Dave has been traveling around Australia with family. He made a video about an old solar thermal facility.
                    • Chris also has been traveling, he gave a talk at the Embedded Open Source Summit about doing embedded training.
                    • Solar thermal efficiencies
                    • What is the efficiency of a mirror?
                    • What is the efficiency of a transformer?
                    • Power engineering class
                    • Nic Bingham giving a talk about high pressure electronics
                    • Chris was inspired from CNLohr's episode where he talked about building a switcher. He recently bought a bunch of CH32V003 parts.
                    • WSJ article about Chiplets (Archive)
                    • Chiplets have been mentioned on the show a bunch before
                      • Ming Zhang
                      • Craig Bishop
                      • Dave reviews the Analog Discovery 3. This is Chris's daily driver at this point, especially when on the move.
                      • While searching for something during the episode, Chris stumbled onto an old reddit post from 9 years ago about how they decide where to build fabs.
                      • Chris and Dave both felt dumb while watching Shahriar's Starlink teardown 
                      • Kathy Loves Physics will be doing videos about Maxwell's equations
                      • 1 hr 5 min