The Lone Machinists

The Lone Machinists

By Jamie Peacock & Curt Van Filipowski (Feat. Jon Dillehay)BusinessTechnologyEducation
Download on the App Store

All The Lone Machinists episodes

  • Ep. 98: Who Uses Imperial?

    This week on the Lone Machinist Podcast, Curt has a rather unfortunate encounter with a skunk, leaving his dog, his Jeep, and part of his house smelling absolutely dreadful. Jamie, naturally, has plenty of questions about Curt's supposedly sensual encounter with the local wildlife.

    Meanwhile, Jamie is discovering the consequences of being far too generous with his own schedule. Between running long machining jobs, squeezing in customer work, and trying to keep production moving, he's finally considering building a scheduling tool to stop himself promising more hours than actually exist.

    There's plenty of machining and automation discussion, including Jamie's new PCB designed with Claude, machine override controls, Home Assistant automations, probing routines, and an AI-generated program for his newly operational surface grinder. Curt also shares his plans to build a DIY vapor hone after discovering that shipping a commercial unit would cost an absolute fortune.

    The conversation moves on to Bernoulli grippers, Curt's potential purchase of a Sile G2 Swiss lathe, machine power requirements, a CNC router retrofit, and the possibility of Jamie acquiring yet another lathe. They also get into wet versus dry sanding, tumbling media, production work, and the importance of knowing when a customer is taking up too much of your time.

    Two machinists, one very unfortunate skunk encounter, and an increasingly large number of projects involving AI.

    Links Discussed:

    • Jon Instagram: https://www.instagram.com/2_stroke_mafia/

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    1 hr 14 min
  • Ep. 97: Loose Lug Nuts and the Wrong Material

    This week on the Lone Machinist Podcast, Jamie discovers that trusting someone else to work on your vehicle is apparently a dangerous game. After a tyre shop manages to leave every single wheel nut loose, the Land Rover develops a vibration, the wheels turn out to be incorrectly balanced, and Jamie is left wondering how a business can get something so basic so spectacularly wrong.

    Curt has his own quality-control mystery when a brand-new cutting tool turns out to have a rather questionable factory grind. Meanwhile, Jamie finally gets to celebrate a rare success with tool-break detection, which catches a broken end mill before it can ruin the rest of a production run.

    There's plenty of machining discussion, including reamer wear, precision gauge pins, drill bushes, probing, machine accuracy, and the joys of chasing a few microns. Jamie also discovers that a supplier has delivered the wrong aluminium, potentially leaving him with a batch of parts in the wrong shade of purple.

    The conversation moves through affordable automation, dual-nozzle 3D printing, machine organisation, gun drilling, and the growing collection of AI-powered CAD and manufacturing tools. Jamie also talks about introducing morning meetings at the shop, because apparently Carl hasn't developed telepathy yet.

    Two machinists, questionable suppliers, broken tools, and a whole lot of things that should have worked the first time.

    Links Discussed:

    • scan ruler: https://scanruler.com/
    • physcad: https://physcad.io/
    • Gun Drilling Link: https://ultimatereloader.com/2022/11/03/7mm-prc-freedom-rifle-build/

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    1 hr 13 min
  • Ep. 96: I Threaded a Hole That I Forgot to Drill

    This week on the Lone Machinist Podcast, Curt discovers that forgetting to enable tool-break detection can get very expensive, very quickly. A tiny PCB drill snaps during a production run, nobody notices, and suddenly several expensive tools are being introduced to a hole that doesn't exist. Jamie has his own machining mishaps, including the rather impressive achievement of trying to threadmill a hole he forgot to drill in the first place.

    Meanwhile, Jamie has been experimenting with acetone part washing, discovering that PETG doesn't appreciate being left submerged, refining his bluing process, and trying to get consistent results from laser marking. The workshop is also getting unbearably hot, prompting serious consideration of spending a small fortune on air conditioning.

    There's plenty of spindle-gripping discussion, including automated loading workflows, robot positioning, remnant removal, and using AI to help develop increasingly complicated machine macros. Plus, Curt's new 3D-printed clothespin, vintage advertising inspiration, steam engines, laser cutters, expensive drill bushes, and Jamie's ongoing quest to buy another machine.

    Two machinists, a few broken tools, and absolutely no shortage of things that need fixing.

    Links Discussed:

    • Matt (Modern Fuel): https://www.instagram.com/modern_fuel/?hl=en
    • fusion free deburr: https://github.com/jkkicks/Fusion-Free-Deburr
    • physics anonymous is back: https://www.youtube.com/watch?v=vmDuNLQ7a0o&pp=ygURcGh5c2ljcyBhbm9ueW1vdXM%3D
    • ashley anodizing: https://www.instagram.com/ashley.anodized.it?utm_source=ig_web_button_share_sheet&psln=ZDNlZDc0MzIxNw==
    • tool setter: https://www.aliexpress.com/item/1005008783211204.html
    • ben video: https://youtu.be/YBh2s6AfHcY?si=z3q5XuV-Vfn8iumV

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    1 hr 16 min
  • Ep. 95: Yak Shaving and Other Machining Disasters

    This week on the Lone Machinist Podcast, Jamie discovers exactly how much aluminium his LK can accommodate, unfortunately only after machining the first enormous plate and discovering that the machine's door frame has other ideas.

    What follows is several nights of temperature-controlled machining, ice in the coolant, precision boring, banana-shaped plates, and a particularly unpleasant fly cutter affectionately named Tool 666.

    Meanwhile, Curt introduces Jamie to the concept of yak shaving, where attempting to complete one simple task somehow results in rebuilding half your lathe. He also puts his new drilling process through its paces, sacrifices a few drills along the way, and discovers that the lathe might still have the upper hand.

    There's also mist extraction and air-quality testing, shaving minutes off cycle times, Jamie finally getting Home Assistant talking to the LK again, and an ongoing battle with label printers that apparently cannot perform the unreasonable task of working with a computer.

    Plus, the office ceiling boards still haven't arrived, the workshop is getting smarter, and the list of things that need doing is somehow getting longer.

    Sometimes the hardest part of machining isn't making the part. It's completing the seventeen side quests required before you can even start.

    Links Discussed:

    • Rob Hutchins: https://www.instagram.com/builtbyhutch/

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    1 hr 16 min
  • Ep. 94: The Slowio Is for Sale… Maybe?

    This week on the Lone Machinist Podcast, Jamie has been listening to The E-Myth again and has come to a rather uncomfortable realization. He's apparently done everything wrong. After a week of running machines, putting out fires, and discovering that Carl isn't a telepath, it's time for SOPs, better workshop organization, and the horrifying prospect of becoming an actual manager.

    Meanwhile, Curt has encountered an entirely different problem. He carefully scheduled his production around suppliers being late, except everyone delivered on time. Now his workshop is full of titanium, packaging, and more things to do than his brain knows what to do with.

    Jamie also manages to squeeze 20 hours of machining into a 24-hour period, starts developing a steel-bluing process for his gripper inserts, and announces that the Slowio is officially heading for the exit.

    There's also mist extraction that's been waiting a year to be installed, enormous Bambu prints, questionable material tolerances, production bottlenecks, and the ongoing realization that buying another printer is almost always the answer.

    Everything is arriving, everything is running, and apparently nobody knows where the fucking scale is.

    Links Discussed:

    • Payton Modarra Monday: https://www.youtube.com/@payton_dean
    • Jessie from DataProto: https://www.instagram.com/dataproto?dlrf=bXN2azhjN280M3Fn

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    1 hr 18 min
  • Ep. 93: Tumbling Is Just Witchcraft With Extra Steps

    This week on the Lone Machinist Podcast, we're experimenting with workholding, tumbling media, and how to make manufacturing a little less painful.

    Curt's been testing different tumbling media on titanium pen bodies, discovering some surprisingly good finishes along the way. Apparently, tumbling is just witchcraft with extra steps. He's also moved pen-body drilling from the lathe to the mill and cut the cycle time from nearly six minutes to under two, with a few ideas for improving coolant delivery still in the works.

    Jamie has been working on new workholding inserts, discussing Joshua's new Firmworks vice, and speed-running replacement Anchor Point bodies after discovering a fixture orientation mistake. There's also a look at minimum stock levels, unattended machining, and making production less of a constant emergency.

    Elsewhere, we discuss using AI to manage customer orders, thermal printers, software companies making questionable decisions, and a certain giveaway involving a Freddy MicroPlus. Plus, there's experimental 3D printing, more shop projects, and a discussion about why you probably shouldn't give away every last keel clamp you own.

    It's another week of making parts, solving problems, and occasionally creating entirely new ones.

    Links Discussed:

    • Payton Modarra Monday: https://www.youtube.com/@payton_dean

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    1 hr 29 min
  • Ep. 92: It's a Tool, Not a Project

    This week on the Lone Machinist Podcast, Curt discovers that despite operating machines, running a business, and apparently being a functioning adult, he still cannot reliably add numbers together. A simple order count leaves him 100 pens short of reality, and it takes Claude to point out that the problem isn't the AI. It's Curt.

    Meanwhile, Jamie discovers that one of his production parts is effectively being made at a fraction of the required hourly rate. The part itself isn't necessarily a disaster because it sits within a profitable family of parts, but it sparks a much bigger discussion about costing, batch quantities, material, consumables, and knowing where your money is actually going.

    There's also a serious effort to stop stockouts from screwing up production, with reorder systems, QR codes, minimum quantities, better workflows, and finally getting the workshop organized.

    Then we get into 3D printers, and both Jamie and Curt are discovering just how much easier life becomes when a printer actually works. Production fixtures, racks, tooling, functional parts, and 18-hour print jobs are suddenly just things you send to the machine and forget about.

    Plus, gantry automation, uptime monitoring, gauge pins, drag tumbling, and a kindergarten field trip involving a very large corn maze.

    Math is hard. Good printers are magic.

    Links Discussed:

    • Tumbling: https://www.instagram.com/p/C4QXPIOOl0z/?utm_source=ig_web_copy_link&stkn=MzRlODBiNWFlZA==

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    1 hr 17 min
  • Ep. 91: The Penpocalypse Is Coming

    This week on the Lone Machinist Podcast, we're back from IMTS and apparently nobody came home with fewer projects.

    Curt has managed to create a rather serious problem for himself after launching a one-minute presale for his pens. The idea was simple, keep the sales window short so he wouldn't end up with more orders than he could handle. Unfortunately, everyone who got the pens into their carts during that minute could take their sweet time checking out. The result? Curt sold more pens than he's ever sold before and now has hundreds of pens to make. Rookie move.

    Jamie has his own growing list of projects, including new products, customer work, a lathe project, more Anchor Point pallets, and plans for a bigger 3D printer because apparently the existing printer has started taking up valuable desk space.

    We also spend plenty of time talking about the recent IMTS trip, including Paper Kurt's adventures, meeting patrons and machinists, Chicago, New York, and the truly ridiculous amount of walking involved. Jamie averaged around 16,000 steps a day, and somehow still came home wanting to do it all again.

    There's also plenty of CNC automation, pneumatic systems, tooling, printers, production planning, and the usual discussion about buying more equipment because clearly that's the solution.

    Hundreds of pens, thousands of steps, and absolutely no spare time.

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Bonus Content: https://thelonemachinists.com/#bonus-content
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/
    • https://www.noughticalwh.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    58 min
  • Day 4: I Don't Plan on Buying Pens for Two Years

    Jamie is officially running on fumes as the IMTS marathon continues, but there’s still plenty of time for machines, workholding, questionable engineering ideas, and collecting an absolutely unreasonable amount of free stuff.

    Today’s recap covers small five-axis machines, the X-Horse, ToolDawns, a Wazer demo, and why a Wazer might make sense for some applications but definitely isn’t the answer to everything. Jamie also discovers some seriously clever engineering at the Lang booth, including a robot-loading system door that apparently gave an engineer a solid boner.

    There’s also discussion about mineral-cast router frames, IGUS samples, pneumatic workholding, EMO, tumbling systems, and the possibility of building a servo-driven tumbler because apparently buying one isn’t enough.

    Meanwhile, Jamie has accumulated enough pens, stickers, flash drives, tombstones, Tech Decks, and other booth loot to justify its own inventory system.

    The show is winding down, the FOMO is getting worse, and Jamie is already planning what needs to happen at the next one.

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    26 min
  • Day 2: That Thing's Slow as Balls

    Day two of IMTS, and Jamie is somehow fitting even more machines, people, questionable decisions, and engineering ideas into an already packed schedule.

    The day ends with Oktoberfest, late nights, escalator shenanigans, and a trip back to the Airbnb to talk shit until midnight.

    And starts straight back into IMTS, with Jamie working his way through tooling, workholding, abrasives, automation, and an increasingly ridiculous collection of machines.

    There’s discussion about Index’s wild multi-spindle Swiss setup, Siemens PLCs and integrating a probe, a tiny CNC project for grinding serrations into inserts, and why apparently a pneumatic vise is now something Jamie needs to build. They also discover that the steel shelf was actually aluminium, leading to Tall Jacob being sent in because nobody knows who he is.

    Meanwhile, Curt continues experiencing IMTS through messages and social media, while Jamie keeps getting recognized by his voice and discovering that seemingly everyone is at the show.

    Add in giant machines, questionable prototypes, FOMO, meetups, karaoke, and a water bottle that is becoming increasingly thick, chunky, and girthy, and Tuesday at IMTS is shaping up nicely.

    Need Work Done? Check out Subtract Manufacturing at: https://subtractmanufacturing.com/

    The Lone Machinist:

    • Website: https://thelonemachinists.com/
    • Merch: https://www.jspeceng.com/online-store
    • Patreon: https://patreon.com/TheLoneMachinists

    Jamie:

    • http://instagram.com/jspec_engineering
    • https://www.jspeceng.com/

    Curt:

    • https://www.instagram.com/confoundedmachine/
    • https://www.confoundedmachine.com/
    15 min