Foundations of Amateur Radio

Forgive my briefness. You'll discover why this space was left intentionally blank next week. It involves a broken capacitor, of sorts.


I'm Onno VK6FLAB

This space left intentionally blank

Starting in the wonderful hobby of Amateur or HAM Radio can be daunting and challenging but can be very rewarding. Every week I look at a different aspect of the hobby, how you might fit in and get the very best from the 1000 hobbies that Amateur Radio represents. Note that this podcast started in 2011 as "What use is an F-call?".

Education

Training

Language Courses

Higher Education

K-12

Educational Technology

Hobbies

Games & Hobbies

Science

Physics

How To

Leisure

Foundations of Amateur Radio

Over the years you've heard me utter the phrase: "Get on air and make some noise!". It's not an idle thought. The intent behind it is to start, to do something, anything, and find yourself a place within the hobby of amateur radio and the community surrounding it.

Since starting my weekly contribution to this community, thirteen years ago, almost to the day, I promise, this wasn't planned, you'll see why in a moment, I've been working my way through the things that take my fancy, things that are of interest to me, and hopefully you. From time-to-time I don't know where the next words are going to come from. Today they came to me five minutes ago when a good friend, Colin, VK6ETE, asked me what inspires me, after I revealed to him that I didn't know what I was going to talk about.

That's all it took to get me rolling.

There are times when getting to that point takes weeks, I do research, figure out how something works, explore how it might have been tackled before, if at all, and only then I might start putting my thoughts together, often I'll have multiple stabs at it and if I'm lucky, sometimes, something emerges that I'm astonished by. Today is much simpler than all that, since the only research required is to remember the people I've interacted with.

Last week I met an amateur, Jess M7WOM, who was in town. Until last week, we'd never met and interacted only online. We discovered that we have a great many things in common. A joy for curiosity, exploration, technology, computers and a shared belief that we can figure out how to make things work. That interaction, over the course of a day, continues to fuel my imagination and provides encouragement to try new things.

The same is true for a friend, Eric VK6BJW, who asked what they should do with the hobby after having been away for a long time with family, children, commitments and work. Just asking a few simple questions got the juices going and provided inspiration to start playing again.

Another amateur was bored and claimed to have run out of things to do. A few of us started asking questions about their exposure to the hobby. Had they tried a digital mode, had they built an antenna, had they tried to activate a park, or as I have said in the past, any of the other 1,000 hobbies that are embedded within the umbrella that we call amateur radio.

Right now I'm in the midst of working through, actually truth be told, I'm starting, Okay, actually, I've yet to start, reading the online book published at PySDR.org. Prompted by a discussion with Jess last week, I started exploring a known gap in my knowledge. I likened it to having a lamp-post in front of my face, I can see to either side, but in-between is this post, obscuring an essential piece of knowledge, how one side is connected to the other. In my case, on one side, I can see the antenna, how it connects to an ADC, or an Analogue to Digital Converter. On the other, I can also see how you have a series of bytes coming into your program that you can compare against what you're looking for, but the two are not quite connected, obscured by that .. post. I know there's a Fourier Transform in there, but I don't yet grok how it's connected.

Recently I discussed using an RDS, or Radio Data Systems decoder, called 'redsea', connected to 'rtl_fm', in turn connected to an RTL-SDR dongle, that is, you connect an antenna to a cheap Digital TV decoder, tune to an FM broadcast station and use some software to decode a digital signal. It turns out that the PySDR book serendipitously uses this signal path as an end-to-end tutorial, complete with all the code and example files to make this happen. I actually read the chapter, but it's assuming some knowledge that I don't yet have, so I'm going to start on page one .. again.

So, what has this got to do with Inspiration, you ask. Well, everything and nothing. Inspiration doesn't occur in a vacuum. It needs input. You cannot see light without it hitting something, radio waves don't exist and cannot be detected until it hits an antenna, the same is true for inspiration. It needs to hit something. You need to react, it needs to connect.

That is why I keep telling you to get on air and make some noise.

I'm Onno VK6FLAB

On the nature of Inspiration ..

Foundations of Amateur Radio

Much is made in our hobby about working DX, that is sending and receiving distant radio signals. How distant is up for debate. Depending on where you are, DX might be outside the continent, outside the country, or in my case you could easily say, anything outside of my state, since the nearest border is about 1,240 km away from here. For giggles, the distance between Albany in the South West and Wyndham in the North East of the state is 2,400 km and that's via radio wave. By car it's 3,570 km. To be clear, we're still inside VK6.

All that to say, DX is in the ear of the beholder.

If that's not enough, there's a group of amateurs who are of the strident opinion that for DX to count it must be a two-way contact. That is, both stations need to hear each other and as such, those amateurs believe that a mode like WSPR, the Weak Signal Propagation Reporter can't possibly be considered DX, even if you can discover that your station was heard on the other side of the planet.

I'm going to skip right over those who tell anyone who will listen that FT8 isn't real radio because it's just computers talking to each other.

This to give you some context when I introduce the next idea, namely FM Broadcast DX. I'm acutely aware that this isn't amateur radio, there's no two-way communication, it's probably not DX and besides, it's computers. That out of the way, let me tell you about something I discovered.

Many, but not all, FM broadcasters transmit multiple signals when you tune to their station. One of those is a signal called RDS, or Radio Data Systems. It's used to show you the name of the station, sometimes what song is playing, what style of station it is and other information like road traffic alerts and emergencies. You can decode this using an RDS decoder.

Recently I was browsing YouTube. I came across a video on the Broken Signal channel that digs into the world of FM-scanning to log any RDS information for the purpose of finding DX stations. The video goes into great detail on how to set this up with Windows, by copying files into various places, updating XML files, configuring sample rates, connecting virtual audio cables, running several tools simultaneously and it goes on to demonstrate how this all hangs together.

While I was impressed with the idea, the implementation didn't speak to me, since I wince at the notion of copying random files into an application installation directory and besides I'm a Linux user.

So, I went hunting.

Turns out that there is an RDS decoder for Linux, called "redsea", written by Oona OH2EIQ. It's on GitHub. Compiling it is pretty straightforward, follow the instructions and it should work as advertised. You'll also need to have "rtl-sdr" installed so you can run a tool called "rtl_fm". Again Oona's instructions should help you out. I will add that I'm assuming that you have a so-called RTL-SDR dongle, it's a cheap USB device that can be coerced into pretending to be a software defined receiver with about 2.2 MHz of bandwidth.

Based on the example shown, I immediately tuned to a local station and RDS information started filling my screen. To let you know how simple this is, you run the "rtl_fm" tool and send its output to "redsea" which decodes the information and displays it on the screen. That's it. No more moving parts, no XML files, no shenanigans with virtual audio cables and the like.

Stage one complete, on to stage two, scanning.

The "rtl_fm" tool has the capability to scan a range of frequencies. I tried this, but didn't really get anywhere, since for the scanner to work you need to set the squelch in order to switch between frequencies, but if you're aiming for a weak signal, it will never be heard if your local FM broadcasters are belting away 24 hours a day.

So, instead I'm scanning each frequency between 87 MHz and 109 MHz, every 10 kHz, for 10 seconds, to see if there's any RDS data to be heard. I send that to a file and when I feel the urge, I can go check to see what I've heard.

I haven't yet put this up on GitHub because I'm considering making it a contribution to the "redsea" project instead of a project of my own.

Now, at this point you might wonder what all the fuss is about. Well, the same method could be used to decode your local amateur repeater idents, or the NCDXF beacons, or any other kind of interesting information. I saw one user link "rtl_fm" to "multimon-ng", a tool I've spoken about before.

You should also check out Oona's website, windytan.com, there's a whole range of signal processing stories to be found, including dealing with flutter distortion on Steamboat Willie and a very cool spiral spectrogram.

I'll leave you with one question. Why haven't you installed Linux yet?

I'm Onno VK6FLAB

Automatic FM DX decoding

Foundations of Amateur Radio

Some life lessons require additional reinforcement from time to time. This week I was strongly encouraged to remember a lesson that can be summarised as: "A place for everything and everything in its place." It was first uttered like that to me a quarter of a century ago by a client who used it frequently around their staff.

It means that all the stuff that fills up the space around you, in this case, physical stuff, needs to have a specific home and if you're not actively using it, that is where it should be. This is useful in a context where you have lots of little things that you need from time-to-time, or if you have several people dependent on the availability of a single thing, like say the labelling machine used to tag equipment.

The other day an incident involving a tiny tablet that went flying across the kitchen bench, bounced over the edge and vanished, not helped by the fact that taking the tablet was time sensitive and the fact that the vacuum cleaner was right there - no the tablet was not inside, I checked. I walked around the bench to the other side and started rolling on the ground with the aid of the torch on my phone. Ten minutes in, still nothing. I remembered that my go-bag has a torch, so I went to get it from its place.

One problem, it wasn't there. I turned the bag upside down and went through it. Nope, no torch. That's two things that vanished. Neither has resurfaced at this point. I went to the chemist to get another tablet and took it 40 minutes late.

The torch however was not so easy to resolve.

My, what I call go-bag, has a bunch of life affirming essentials. It started pretty soon after becoming a radio amateur. It has two jumpers, long-leg underwear, an under shirt, a towel and a microfibre cloth, leather gloves, mosquito net, medication, band-aids, toilet paper, soap and some empty bags. It also has a torch, well, not right now it doesn't.

After failing on my mission to locate the torch, I started stuffing the contents of my go-bag, straight back into its bag, only to realise that I wasn't helping future me. I stopped, pulled everything back out and started folding everything neatly. Then I repacked the bag.

I've put in a stand-by torch, in Dutch they're called a "knijpkat", or a mechanically operated torch. You squeeze it in your hand and in doing so you move a dynamo that charges either a battery or a capacitor. It's called a "pinch cat" because it sounds a little like that. The light is fine for getting around in the dark, but you wouldn't mistake it for a super bright, eyeball burning, LED torch.

In case you're wondering why I'm going into such detail about this, it's because you never know when you need something. It might be urgent, or it might not be. Having your stuff organised in such a way that you can find it, can sometimes be the difference between life and death.

Now I get it. Not everyone works like this. I have for decades had a system on my desk where I know where all the bits of paper are and it's not helpful if someone cleans it up, because at that point I have no reference to anything and I will have to go through the whole box of things to find what I need.

When my partner and I travelled around Australia in an Iveco Daily stuffed to the gunnels with electronics equipment, clothes, food, camping gear, a two metre satellite dish and plenty of other things, I had a system that involved four filing cabinets bolted into the van, combined with a dozen or more crates, metal hooks, straps and a safe. I was forever putting things away in the exact same place, each time.

It's not a process that comes naturally to everyone and so we settled on a process where I would pack the van so I could lay my hands on anything within seconds, from the socket set to the satellite signal finder, from a clean pair of shorts to a raincoat, from a fuel funnel to a water funnel. Pro-tip, don't mix the two. Tools aside, of course this system also applies to the first aid kit and the fire extinguisher, the fire blanket, band-aids and medication, and in this case a torch.

You might ask how this could apply to amateur radio. Go-bag aside, looking around my radio shack, it has lots of little things, like adaptors, measuring gadgets, chargers, fly leads, microphone clips, coax switches and plenty of other stuff.

If everything in your shack is in use, this isn't an issue, but if you're like me and don't have your NanoVNA, and all the SMA to something adaptors, or plenty of other things lying around for that "just in case" time, then having a place for everything and everything in its place is a very productive way to keep things organised so you don't spend half your life looking for things.

Similarly, if you know where your portable shack is, your battery charger, an emergency antenna, or some other essential item, you'll discover that when it comes down to the pointy end of a situation, this might make a difference.

So, how do you keep your life, and shack, organised and what other processes and methods have you tried?

I'm Onno VK6FLAB

A place for everything and everything in its place..

Foundations of Amateur Radio

In the early 1920's long distance communication using radio was a growing interest. At the time it was thought that communication that we take for granted today, over long-distance HF, was limited to long wave or extremely low frequencies, the lower the better. With that restriction came massive antennas and high power transmitters, available only to commercial and government stations.

Then radio amateurs let the cat out of the bag by discovering that so-called "short wave" radio could be heard all across the globe. As an aside, today, "short wave" seems quaint, because we've discovered that even shorter waves can be used to communicate, right down to nanometre communication as shown by NASA in its XCOM technology demonstration on the 12th of May, 2019. On a daily basis we use 120 mm and 60 mm waves when we use 2.4 and 5 GHz Wi-Fi for example.

As a result of the discovery of short wave radio, a gold-rush emerged. There was a hunger in the community for radio, businesses and communities adopted the new medium, there were radio courses being taught in Universities, church services and other forms of entertainment started filling the airwaves. Comedy, talk shows, music, concerts, serials and dramas spread across the electromagnetic spectrum and radio amateurs who had discovered the phenomenon were running the risk of being pushed aside by commercial interests willing to pay for access.

As I've said before, in many countries at the time, amateur radio was actively discouraged, sometimes it was even illegal.

Before we continue, I should quote some statements made about radio before the gold-rush which at the time was seen as "Telegraphy Without Wires".

In 1865 a Boston Post editorial proclaimed: "Well-informed people know it is impossible to transmit the voice over wires and that were it possible to do so, the thing would be of no practical value."

Lord Kelvin, President of the Royal Society, said: "Radio has no future." and went on to say: "Wireless is all very well but I'd rather send a message by a boy on a pony", he also said: "Heavier-than-air machines are impossible." and "X-Rays will prove to be a hoax."

Not all statements aged as badly. The New York Times said in 1899: "All the nations of the earth would be put upon terms of intimacy and men would be stunned by the tremendous volume of news and information that would ceaselessly pour in upon them."

Back to the IARU. Before a business trip to Europe, the board of directors of the ARRL asked their President, Hiram Percy Maxim, to encourage international amateur relations, which on 12 March 1924 resulted in a dinner given, at the Hotel Lutetia in Paris according to Hiram, a "certain dining room" by "the most distinguished radio men of Europe."

Hiram goes on to say that: "This A.R.R.L. President has sat in at a good many very impressive radio meetings in the past, ranging from Maine to California, but he has never sat in at a meeting where there was quite as much thrill as at this meeting in Paris where the amateurs of nine different countries sat down together."

The countries were, France, Great Britain, Belgium, Switzerland, Italy, Spain, Luxembourg, Canada and the United States. Hiram remarks that "Denmark was represented by a letter in which regret was expressed at the inability to have a representative present and asked that the amateurs of Denmark be counted in." You should dig up a copy of the May 1924 edition of QST to get a sense of occasion where the ARRL president compares the thrill of the "hamfest" to the atmosphere during that dinner and pities those who have never experienced it.

During the meeting it was decided to form an organisation which was going to be called the International Amateur Radio Union. A temporary committee was formed that appointed Hiram Maxim as the chair and Dr. Pierre Corret as secretary to take charge of the details to create a permanent organisation. The final decision was to call for a general Amateur Congress on the Easter Holiday of 1925 where the IARU would be formalised.

On the 14th of April, 1925, 250 radio amateurs from 23 countries met in Paris and over the next four days the details of the new Union were hammered out. Among those details were that the organisation was chiefly for "the coordination and fostering of international two-way amateur communication, that it should be an organisation by individual memberships until strong national societies had been formed in the principal nations and a federation would be feasible, and that its headquarters would be located in the USA."

The constitution was written over a day and night session and by the morning of the 17th of April, every delegate had a copy and then the hard work began, approving the constitution, section by section, by the entire Congress. On the morning of the 18th, elections were held and Hiram U1AW was elected international president, Gerald G2NM, international vice-president, Jean F8GO and Frank Z4AA councillors-at-large and Kenneth U1BHW international secretary-treasurer.

With the election complete, the IARU was officially in business.

The new constitution was published in English, French and Esperanto. Why Esperanto, you ask? In the middle of 1924, the ARRL adopted Esperanto as its official auxiliary language. According to Clinton B. DeSoto, W1CBD, author of a fabulous book "Two Hundred Meters And Down - The Story of Amateur Radio", that might have been the highest official recognition that language ever received.

Credit to Clinton for much of the time line and wording I've shared here. I'll leave you with one final quote from his book.

Clinton W1CBD writes: "One day amateur television is bound to come, however remote though that day may be. It is, indubitably, inevitable that one day amateurs will be able to see each other, as well as talk with each other; and when that day comes the development of amateur radio as a social institution will have taken another great step forward - at least according to present standards. But by then the standards will have changed, and amateurs will have something more to work toward, and the ultimate will still not have arrived. There are always new goals, new horizons. May it fall to amateur radio to march many steps toward the goal of complete knowledge ere its footprints are lost in the sands of time!"

I'm Onno VK6FLAB

The origins of the International Amateur Radio Union

Foundations of Amateur Radio

A great deal of energy is expended on the notion of operating portable. I've talked about this plenty of times. Issues like power, antennas, suitable radios, logging, transport and time of day all come to mind. Some activities are framed specifically as portable operations. Things like Summits On The Air, or SOTA, Parks On The Air, or POTA, World Wide Flora and Fauna, or WWFF. There's field days, portable contests and specific activities like the 2014 activation of FT5ZM on Amsterdam Island and the 2016 activation of VK0EK on Heard Island. I mention those last two specifically since I had the distinct pleasure of meeting those teams and had the opportunity to interview each amateur whilst enjoying a typical Aussie BBQ. I'll point out that no shrimps were thrown anywhere. You can find those interviews with FT5ZM and VK0EK on my website at vk6flab.com.

Each of these activities are framed in the context of the activity, as-in, you climb a mountain with a radio and then you make noise.

That's not the only way to go portable. One of my friends checks in to the weekly F-troop as a portable station most weeks. Glynn VK6PAW gets in his car, drives to some random location and participates from wherever he happens to be at the time. In doing so, the radio part of it, is the add-on between leaving home and arriving at a destination for a cup of coffee.

Charles NK8O works all over the United States. When he checks into F-troop, he's rarely in the same place two weeks in a row. In between work and sleep you'll find him activating a nearby park. He's been doing this for quite some time. While this is a POTA activity, he finds parks that fit into his life, rather than point at a park and make a specific trip there to activate it.

Before I continue, I'd like to mention that I'm not dismissing making a specific trip. Far from it. The point I'm making is that making any such trip is extra work. It's an added activity in your life. Whilst entirely enjoyable, there's plenty of times where that's just not possible.

Instead I'd like to look at this from the other side.

Both Glynn and Charles have a radio with them. Perhaps not all the time, but often enough that they can activate their station when they happen to be in a suitable location.

I've similarly put a radio into my luggage when going on a holiday. It might transpire that it stays there, or it might be that I happen to find a picnic table at the side of a water reservoir that happens to be in the shade and just begging to try a radio at.

In other words, if you have a radio handy, you can handily use it when the opportunity comes to pass.

So, what do you bring with you? If you're like Charles, you'll have a QRP radio, a Morse key, a battery and a wire antenna. Glynn has a vertical that lives in his car and the radio is bolted in.

For a while I had my radio permanently mounted in my car and I suspect that will return there in the not too distant future. It was removed for a service that involved the transmission being replaced after it failed after only a 140,000 km on the clock. Thankfully a fellow amateur had a spare car we could use, but I wasn't game to drill holes for an antenna and I'm pretty sure they were pretty happy about that.

The more I look at the activities that others report on, the more I have come to realise that the people who get on-air the most are the ones who have found a way to weave radio into their day-to-day life, rather than rely on specific amateur radio activities and plans.

I confess that I miss sitting by a local lake making noise or finding a random car park with shade that is just begging for someone, anyone, to turn on a radio and have a go.

So, how do you approach radio in your life, and how might you find ways to incorporate it into the gaps?

I'm Onno VK6FLAB

This space left intentionally blank

Download our free app to listen on your phone