3D Printing Made Easy

3D Printing Made Easy

By Printara 3DTechnology
Download on the App Store

All 3D Printing Made Easy episodes

  • ABS vs ASA: Printing Car Parts That Survive Summer Heat

    Automotive heat reveals which 3D printed materials actually survive. PLA softens near 60°C and fails in a hot car, while ABS handles interior heat and ASA handles exterior sun and UV.

    In this episode you'll learn:

    • ABS has a glass transition around 105°C and parts work long-term at roughly 80 to 90°C, while PLA starts softening at 50 to 60°C.
    • ABS density ranges from 0.9 to 1.53 g/cm3 with a median of 1.07 g/cm3, and thermal conductivity sits around 0.1 W/(m K).
    • ASA replaces ABS's butadiene with an acrylate elastomer, which resists UV photo-oxidation that yellows and embrittles ABS outdoors.
    • ASA tensile strength is about 33 MPa and Izod impact strength around 321 J/m, comparable to ABS (30 to 40 MPa, 200 to 400 J/m).
    • ASA Heat Deflection Temperature reaches up to 93°C per Prusament data, in the same band as ABS (80 to 98°C).
    • Read the full guides on our site: ASA: Outdoor Alternative to ABS Without Compromise · ABS Production Guide: When and Why to Choose It Over PLA

      Watch on YouTube: 3D Printing Made Easy playlist

      We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

      This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

      50 min
    • Spring Recap: TPU, Slicers, Printers and Reader Q&A

      Both articles wrap up the first month at printara3d.cz, consolidating practical lessons on materials, slicers, printer ecosystems and the most common reader questions.

      In this episode you'll learn:

      • TPU 95A is among the hardest and most widely available variants, while TPU 85A or 75A offer higher flexibility for shock absorption and ergonomic parts.
      • TPU typically prints at 20 to 40 mm/s with retraction of 0.5 to 1 mm, a 0.4 mm nozzle, 220 to 240 degrees C nozzle and 40 to 50 degrees C bed.
      • The slicer market consolidated around three players: OrcaSlicer, Bambu Studio and PrusaSlicer, with OrcaSlicer becoming the standard for advanced users.
      • PETG-CF contains 10 to 20 percent carbon fibers by weight, costs two to three times standard PETG and requires a hardened nozzle.
      • First month at printara3d.cz covered PETG composites (week 1), Bambu Lab AMS on X1C and H2S (week 2), and ABS/ASA warping (week 3).
      • Read the full guides on our site: Spring Recap: 3 Lessons from TPU, Slicers and Printer Brands · Reader Q&A: Your Questions from the First 3 Weeks Answered

        Watch on YouTube: 3D Printing Made Easy playlist

        We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

        This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

        40 min
      • Filament Brands and Model Libraries: Picking Both Right

        Both articles teach the same skill: evaluating the source (filament brand or model database) before printing, because the source determines whether the print succeeds.

        In this episode you'll learn:

        • Polymaker is a Chinese manufacturer based in Shanghai with lines including PolyLite, PolyTerra, PolyMax, PolyMide, PC, and PolyFlex TPU.
        • Bambu Lab AMS identifies spools via RFID chip and auto-sets the profile when the chip matches or the profile is set manually.
        • Prusament ships in recyclable cardboard spools without a plastic core; PolyTerra also switched to cardboard; Bambu Lab offers plastic-free refill spools.
        • Printables.com is operated by Prusa Research and features 'make' photos plus Prusameter points earned through uploads, ratings, and contests.
        • Printables integrates with PrusaSlicer so the 'Print' button on a model page opens the slicer with the file loaded and a pre-filled printer profile.
        • Read the full guides on our site: Polymaker vs Bambu vs Sunlu vs Prusament: Brand Comparison · Where to Download 3D Models: Printables vs Thingiverse vs Makerworld

          Watch on YouTube: 3D Printing Made Easy playlist

          We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

          This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

          34 min
        • Picking and Mastering OrcaSlicer for Everyday Printing

          Both articles center on OrcaSlicer as a free open-source slicer, one walking through its setup and calibration and the other placing it next to Cura and PrusaSlicer so you can choose the right tool for your workflow.

          In this episode you'll learn:

          • OrcaSlicer is an open-source slicer developed by SoftFever, originally launched in July 2022 as 'Bambu Studio SoftFever'.
          • OrcaSlicer is a fork of Bambu Studio, which is itself a fork of PrusaSlicer, while PrusaSlicer traces back to the older Slic3r.
          • The SoftFever/OrcaSlicer GitHub repository currently has over 14,000 stars and is free on Windows, macOS, and Linux at orcaslicer.com.
          • Cura is developed by UltiMaker and runs on a separate core called CuraEngine, not the PrusaSlicer family tree.
          • OrcaSlicer ships an integrated calibration suite with wizards for flow rate, pressure advance, temperature towers, and retraction, plus pre-installed profiles for Bambu Lab, Prusa, Voron, Creality, Anycubic, and FLSun.
          • Read the full guides on our site: OrcaSlicer from Scratch: Complete Setup and Calibration Guide · OrcaSlicer vs Cura vs PrusaSlicer: A Real-World Workflow Comparison

            Watch on YouTube: 3D Printing Made Easy playlist

            We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

            This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

            17 min
          • Why ABS Filament Outperforms PLA For Engineering

            Tired of PLA warping in your car or melting on hot days? In this episode of 3D Printing Made Easy we cover why ABS filament still wins for engineering parts that need real heat resistance, impact strength, and an injection-molded finish, and exactly how to print it without the warping nightmare.

            In this episode you'll learn:

            • ABS vs PLA heat showdown: why ABS holds shape past 80C while PLA collapses at 60C, and which everyday parts demand the upgrade for car interiors, motor mounts, and outdoor brackets.
            • Settings that actually work: enclosed chamber, bed 90 to 110C, nozzle 230 to 260C, cooling fan off or under 20 percent, plus brim or raft for sharp corners that love to lift off.
            • Acetone smoothing, step by step: container setup, 10 to 30 minute vapor exposure, the curing wait, and how to avoid tacky surfaces that ruin the gloss finish.
            • Finishing arsenal: sanding, painting, chemical welding with acetone for monolithic assemblies, and when ABS-CF, ABS-GF, or ASA fit the job better than standard ABS.
            • Who this is for: FDM hobbyists graduating from PLA-only setups, makers building RC cars, drones, or robotics that face heat or impact, and anyone who wants showpieces with an injection-molded look from a consumer printer.

              Read the full guides on our site: ABS Filament (2/4): How to Tame Printing and Prevent Problems · ABS Filament (3/4): The Magic of Acetone Smoothing and Other Post-processing

              Watch on YouTube: 3D Printing Made Easy playlist

              We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

              This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

              20 min
            • Prusa Surprise - Bondtech INDX Lightweight Toolchanger Finally Solves Multi-Material

              Multi-material printing has long been plagued by wasteful purge towers and unreliable filament swaps, but Bondtech’s new INDX system aims to change the narrative.


              This episode breaks down how this lightweight toolchanger retrofit transforms your Prusa workstation into a professional-grade manufacturing hub without the massive moving mass associated with traditional setups.

              In this episode you’ll learn:

              • How the INDX kinematic system drastically reduces gantry weight compared to IDEX or heavy toolheads.

              • The critical difference between aesthetic multicolor prints and functional multi-material parts.

              • Why this technology eliminates the need for wasteful purge blocks, saving both filament and print time.

              • Practical methods for combining incompatible materials, such as rigid PLA with flexible TPU, in a single print.

              • What to expect regarding installation complexity and firmware integration for existing MK-series machines.

              Decision guide:

              • Choose Bondtech INDX if you require functional prints combining soluble supports or mixed material properties without cross-contamination.

              • Stick to Standard MMU if your primary focus is low-cost, aesthetic color swapping using chemically similar materials.

              Follow @printara3D on Instagram for behind-the-scenes , visit ⁠⁠⁠www.printara3d.com⁠⁠⁠.

              P.S. We also 3D-print custom teambuilding props and gadgets for our partners⁠⁠⁠ Z-AGENCY Teambuilding Company⁠⁠⁠ and ⁠⁠⁠TerraHunt Gaming Platform⁠⁠⁠.


              Read the full guide on our site: INDX Spotlight: A Beginner’s Guide to the Future of Multi-Material 3D Printing

              Watch on YouTube: 3D Printing Made Easy playlist

              We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

              This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

              11 min
            • Bambu Lab H2C Revolution: Is This the End of Filament Waste?

              Multi-material printing usually generates a mountain of purged material, but Bambu Lab’s new H2C system promises to slash that waste to near zero.

              In this episode, we dissect the mechanics behind this hardware upgrade to see if it finally solves the industry's biggest efficiency bottleneck.

              In this episode you’ll learn:

              • How the H2C’s distinct nozzle switching technology eliminates the need for traditional purge towers.

              • Real-world cost analysis comparing H2C operations against standard AMS waste levels.

              • Compatibility details: Which existing X1 and P1 series frames support this retrofit.

              • The specific trade-off between waste reduction and layer-change speed.

              • Best practices for slicing models to maximize the H2C's material-saving algorithms.

              Decision guide:

              • Choose the H2C Upgrade if you print high-cost engineering materials or run multi-color farms where waste eats into margins.

              • Stick with the Standard AMS if your workflow prioritizes raw speed over material efficiency or involves simple two-color swaps.

              Spec highlights:

              • Waste Reduction: Up to 95% less purge compared to legacy single-nozzle setups.

              • Material Support: Fully compatible with PLA, PETG, and ABS; experimental support for TPU.


              Follow @printara3D on Instagram for behind-the-scenes , visit ⁠⁠www.printara3d.com⁠⁠.

              P.S. We also 3D-print custom teambuilding props and gadgets for our partners⁠⁠ Z-AGENCY Teambuilding Company⁠⁠ and ⁠⁠TerraHunt Gaming Platform⁠⁠.

              Read the full guides on our site: Bambu Lab H2C Revolution: Is This the End of Filament Waste? · Bambu Lab H2C vs. H2D: Generational leap, or just evolution with nozzle replacement

              Watch on YouTube: 3D Printing Made Easy playlist

              We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

              This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

              14 min
            • Start with 3D Printing (2/4): What can it all be used for?

              Stop viewing 3D printers as mere toys for tech enthusiasts and start seeing them as versatile tools for personal manufacturing.

              In this second installment of our beginner series, we explore how this technology bridges the gap between digital ideas and physical reality, empowering you to create, repair, and innovate right from your desktop.

              In this episode you’ll learn:

              • Functional repairs: How to design and print spare parts, like a dishwasher lever, to extend the lifespan of household appliances.

              • Creative hobbies: The vast potential for printing detailed board game miniatures, cosplay props, and RC model components.

              • Custom organization: Why printing bespoke drawer organizers often beats generic store-bought solutions.

              • Medical & Industrial impact: How professionals use the tech for everything from skull implants to rapid architectural prototyping.

              • Democratization of manufacturing: The fundamental shift of putting production power directly into the hands of individuals.

              Follow @printara3D on Instagram for behind-the-scenes , visit ⁠www.printara3d.com⁠.

              P.S. We also 3D-print custom teambuilding props and gadgets for our partners⁠ Z-AGENCY Teambuilding Company⁠ and ⁠TerraHunt Gaming Platform⁠.

              Read the full guides on our site: I want to start with 3D printing (2/4): What can it all be used for · Incredible Use of 3D Printing

              New to 3D printing? Take our free beginner course: printara3d.com/course

              Watch on YouTube: 3D Printing Made Easy playlist

              We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

              This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

              12 min
            • Start with 3D printing 1/4: What is it and how does it work

              Additive manufacturing sounds complex, but at its core, it is simply a high-tech hot glue gun controlled by a robot.

              We strip away the jargon to explain exactly how a digital file becomes a physical object on your desk.

              In this episode you’ll learn:

              • The fundamental principle of FDM/FFF technology and how it differs from traditional subtractive manufacturing.

              • The critical workflow: moving from a digital 3D model (STL) to machine instructions (G-code).

              • Why the "slicer" is the most important piece of software in your arsenal—and what it actually does.

              • The specific roles of key hardware components, including the extruder, hotend, and heated bed.

              • How to distinguish between filament-based printing (easier for beginners) and resin systems (SLA).

              Follow @printara3D on Instagram for behind-the-scenes , visit www.printara3d.com.

              P.S. We also 3D-print custom teambuilding props and gadgets for our partners Z-AGENCY Teambuilding Company and TerraHunt Gaming Platform.

              Read the full guides on our site: I want to start with 3D printing (1/4): What is it and how does it work · Guide to Key 3D Printing Technologies

              New to 3D printing? Take our free beginner course: printara3d.com/course

              Watch on YouTube: 3D Printing Made Easy playlist

              We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

              This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

              15 min
            • PETG The Underrated 3D Printing Champion

              PETG offers the best balance of strength, flexibility, and ease of printing, positioning it as the true workhorse material for functional parts and prototypes.

              Stop overlooking this robust filament; it’s the definitive upgrade from PLA when durability matters.

              In this episode you’ll learn:

              • How PETG’s unique combination of impact resistance and flexural strength makes it ideal for parts that must endure repeated stress or bending without snapping.

              • Why PETG outperforms both PLA and ABS in outdoor applications due to its superior resistance to UV degradation and humidity.

              • Practical strategies for minimizing common PETG printing issues like stringing and blobbing by optimizing temperature and retraction settings.

              • Specific medical applications, from anatomical models to surgical guides, where PETG’s biocompatibility and ability to withstand low-temperature sterilization are essential.

              • The key printing differences between PETG and ABS, including PETG's lower shrinkage and reduced warping, which makes large prints significantly more reliable, even without an enclosure.

              Decision guide:

              • Choose PETG if your part needs high toughness, chemical resistance, and a slight degree of flex, especially for outdoor or mechanical use.

              • Choose PLA if speed, ease of printing, and purely aesthetic results are the top priorities, and the final part will not be stressed or exposed to high heat.

              Spec highlights:

              PETG boasts a decent heat resistance up to 76° C and exhibits excellent layer adhesion, ensuring robust, watertight parts; typical printing temperatures range from 220 to 255° C.


              P.S. We also 3D-print custom teambuilding props and gadgets for our partners Z-AGENCY Team Building Company and TerraHunt Gaming Platform.

              Read the full guides on our site: PETG in Practice: From Functional Parts to Medical Applications · PETG – Versatile 3D Printing Champion: Complete Guide

              Watch on YouTube: 3D Printing Made Easy playlist

              We 3D-print custom props and game pieces for Z-AGENCY and TerraHunt.

              This show is our AI bonus channel: episodes are automatically generated audio editions of the articles we publish at printara3d.com, so you can follow our topics on the go.

              11 min