Astro arXiv | astro-ph.IM

Characterisation of the MUSIC ASIC for large-area silicon photomultipliers for gamma-ray astronomy by Nicolas De Angelis et al. on Monday 28 November

Large-area silicon photomultipliers (SiPMs) are desired in many applications

where large surfaces have to be covered. For instance, a large area SiPM has

been developed by Hamamatsu Photonics in collaboration with the University of

Geneva, to equip gamma-ray cameras employed in imaging atmospheric Cherenkov

telescopes. Being the sensor about 1 cm$^2$, a suitable preamplification

electronics has been investigated in this work, which can deal with long pulses

induced by the large capacitance of the sensor. The so-called Multiple Use SiPM

Integrated Circuit (MUSIC), developed by the ICCUB (University of Barcelona),

is investigated as a potential front-end ASIC, suitable to cover large area

photodetection planes of gamma-ray telescopes. The ASIC offers an interesting

pole-zero cancellation (PZC) that allows dealing with long SiPM signals, the

feature of active summation of up to 8 input channels into a single

differential output and it can offer a solution for reducing power consumption

compared to discrete solutions. Measurements and simulations of MUSIC coupled

to two SiPMs developed by Hamamatsu are considered and the ASIC response is

characterized. The 5$^{th}$ generation sensor of the Low Cross Talk technology

coupled to MUSIC turns out to be a good solution for gamma-ray cameras.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14022v2

Characterisation of the MUSIC ASIC for large-area silicon photomultipliers for gamma-ray astronomy by Nicolas De Angelis et al. on Monday 28 November

Large-area silicon photomultipliers (SiPMs) are desired in many applications

where large surfaces have to be covered. For instance, a large area SiPM has

been developed by Hamamatsu Photonics in collaboration with the University of

Geneva, to equip gamma-ray cameras employed in imaging atmospheric Cherenkov

telescopes. Being the sensor about 1 cm$^2$, a suitable preamplification

electronics has been investigated in this work, which can deal with long pulses

induced by the large capacitance of the sensor. The so-called Multiple Use SiPM

Integrated Circuit (MUSIC), developed by the ICCUB (University of Barcelona),

is investigated as a potential front-end ASIC, suitable to cover large area

photodetection planes of gamma-ray telescopes. The ASIC offers an interesting

pole-zero cancellation (PZC) that allows dealing with long SiPM signals, the

feature of active summation of up to 8 input channels into a single

differential output and it can offer a solution for reducing power consumption

compared to discrete solutions. Measurements and simulations of MUSIC coupled

to two SiPMs developed by Hamamatsu are considered and the ASIC response is

characterized. The 5$^{th}$ generation sensor of the Low Cross Talk technology

coupled to MUSIC turns out to be a good solution for gamma-ray cameras.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14022v1

Elements of effective machine learning datasets in astronomy by Bernie Boscoe et al. on Monday 28 November

In this work, we identify elements of effective machine learning datasets in

astronomy and present suggestions for their design and creation. Machine

learning has become an increasingly important tool for analyzing and

understanding the large-scale flood of data in astronomy. To take advantage of

these tools, datasets are required for training and testing. However, building

machine learning datasets for astronomy can be challenging. Astronomical data

is collected from instruments built to explore science questions in a

traditional fashion rather than to conduct machine learning. Thus, it is often

the case that raw data, or even downstream processed data is not in a form

amenable to machine learning. We explore the construction of machine learning

datasets and we ask: what elements define effective machine learning datasets?

We define effective machine learning datasets in astronomy to be formed with

well-defined data points, structure, and metadata. We discuss why these

elements are important for astronomical applications and ways to put them in

practice. We posit that these qualities not only make the data suitable for

machine learning, they also help to foster usable, reusable, and replicable

science practices.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14401v1

Concept of an achromatic stellar coronagraph and its application for detecting extrasolar planets by Bhavesh Jaiswal. on Monday 28 November

Imaging the planets that orbit around other stars requires blocking the host

star which is usually 8-10 orders of magnitude brighter than the planets. This

is achieved with the help of a stellar coronagraph. In the current work, a

concept of a new type of stellar coronagraph is introduced where the star light

is blocked by a linear polarizer in the collimated beam. It is based on

differential rotation between the linear polarization state of planet light and

that of star light. This is achieved with the help of a set of thick

birefringent crystals in the collimated beam of a telescope where the planet

light is made to travel extra optical path length compared to star light. By

adjusting the orientation and thickness of the crystal, the optical path length

can be made to cause a phase difference of {\pi}, just enough to rotate the

initial plane of polarization by 90{\deg} for planet-light without affecting

the star light. Theoretical calculations involving the phase difference due to

birefringent crystals are presented here along with the basic configuration and

design. It is shown that the design blocks the star light identically at all

wavelengths. Application of this concept for detecting Earth-like extrasolar

planet is discussed using a one-meter class telescope.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14624v1

Detection of Einstein Telescope gravitational wave signals from binary black holes using deep learning by Wathela Alhassan et al. on Monday 28 November

The expected volume of data from the third-generation gravitational waves

(GWs) Einstein Telescope (ET) detector would make traditional GWs search

methods such as match filtering impractical. This is due to the large template

bank required and the difficulties in waveforms modelling. In contrast, machine

learning (ML) algorithms have shown a promising alternative for GWs data

analysis, where ML can be used in developing semi-automatic and automatic tools

for the detection, denoising and parameter estimation of GWs sources. Compared

to second generation detectors, ET will have a wider accessible frequency band

but also a lower noise. The ET will have a detection rate for Binary Black

Holes (BBHs) and Binary Neutron Stars (BNSs) of order 1e5 - 1e6 per year and

7e4 per year respectively. In this work, we explore the possibility and

efficiency of using convolutional neural networks (CNNs) for the detection of

BBHs mergers in synthetic GWs signals buried in gaussian noise. The data was

generated according to the ETs parameters using open-source tools. Without

performing data whitening or applying bandpass filtering, we trained four CNN

networks with the state-of-the-art performance in computer vision, namely VGG,

ResNet and DenseNet. ResNet has significantly better performance, detecting

BBHs sources with SNR of 8 or higher with 98.5% accuracy, and with 92.5%, 85%,

60% and 62% accuracy for sources with SNR range of 7-8, 6-7, 5-6 and 4-5

respectively. ResNet, in qualitative evaluation, was able to detect a BBHs

merger at 60 Gpc with 4.3 SNR. It was also shown that, using CNN for BBHs

merger on long time series data is computationally efficient, and can be used

for near-real-time detection.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.13789v1

Characterisation of the MUSIC ASIC for large-area silicon photomultipliers for gamma-ray astronomy by Nicolas De Angelis et al. on Sunday 27 November

Large-area silicon photomultipliers (SiPMs) are desired in many applications

where large surfaces have to be covered. For instance, a large area SiPM has

been developed by Hamamatsu Photonics in collaboration with the University of

Geneva, to equip gamma-ray cameras employed in imaging atmospheric Cherenkov

telescopes. Being the sensor about 1 cm$^2$, a suitable preamplification

electronics has been investigated in this work, which can deal with long pulses

induced by the large capacitance of the sensor. The so-called Multiple Use SiPM

Integrated Circuit (MUSIC), developed by the ICCUB (University of Barcelona),

is investigated as a potential front-end ASIC, suitable to cover large area

photodetection planes of gamma-ray telescopes. The ASIC offers an interesting

pole-zero cancellation (PZC) that allows dealing with long SiPM signals, the

feature of active summation of up to 8 input channels into a single

differential output and it can offer a solution for reducing power consumption

compared to discrete solutions. Measurements and simulations of MUSIC coupled

to two SiPMs developed by Hamamatsu are considered and the ASIC response is

characterized. The 5$^{th}$ generation sensor of the Low Cross Talk technology

coupled to MUSIC turns out to be a good solution for gamma-ray cameras.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.14022v1

Detection of Einstein Telescope gravitational wave signals from binary black holes using deep learning by Wathela Alhassan et al. on Sunday 27 November

The expected volume of data from the third-generation gravitational waves

(GWs) Einstein Telescope (ET) detector would make traditional GWs search

methods such as match filtering impractical. This is due to the large template

bank required and the difficulties in waveforms modelling. In contrast, machine

learning (ML) algorithms have shown a promising alternative for GWs data

analysis, where ML can be used in developing semi-automatic and automatic tools

for the detection, denoising and parameter estimation of GWs sources. Compared

to second generation detectors, ET will have a wider accessible frequency band

but also a lower noise. The ET will have a detection rate for Binary Black

Holes (BBHs) and Binary Neutron Stars (BNSs) of order 1e5 - 1e6 per year and

7e4 per year respectively. In this work, we explore the possibility and

efficiency of using convolutional neural networks (CNNs) for the detection of

BBHs mergers in synthetic GWs signals buried in gaussian noise. The data was

generated according to the ETs parameters using open-source tools. Without

performing data whitening or applying bandpass filtering, we trained four CNN

networks with the state-of-the-art performance in computer vision, namely VGG,

ResNet and DenseNet. ResNet has significantly better performance, detecting

BBHs sources with SNR of 8 or higher with 98.5% accuracy, and with 92.5%, 85%,

60% and 62% accuracy for sources with SNR range of 7-8, 6-7, 5-6 and 4-5

respectively. ResNet, in qualitative evaluation, was able to detect a BBHs

merger at 60 Gpc with 4.3 SNR. It was also shown that, using CNN for BBHs

merger on long time series data is computationally efficient, and can be used

for near-real-time detection.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.13789v1

Costs and benefits of automation for astronomical facilities by A. Yanes-Díaz et al. on Friday 25 November

The Observatorio Astrof\'isico de Javalambre (OAJ{\dag}1) in Spain is a young

astronomical facility, conceived and developed from the beginning as a fully

automated observatory with the main goal of optimizing the processes in the

scientific and general operation of the Observatory. The OAJ has been

particularly conceived for carrying out large sky surveys with two

unprecedented telescopes of unusually large fields of view (FoV): the JST/T250,

a 2.55m telescope of 3deg field of view, and the JAST/T80, an 83cm telescope of

2deg field of view. The most immediate objective of the two telescopes for the

next years is carrying out two unique photometric surveys of several thousands

square degrees, J-PAS{\dag}2 and J-PLUS{\dag}3, each of them with a wide range

of scientific applications, like e.g. large structure cosmology and Dark

Energy, galaxy evolution, supernovae, Milky Way structure, exoplanets, among

many others. To do that, JST and JAST are equipped with panoramic cameras under

development within the J-PAS collaboration, JPCam and T80Cam respectively,

which make use of large format (~ 10k x 10k) CCDs covering the entire focal

plane. This paper describes in detail, from operations point of view, a

comparison between the detailed cost of the global automation of the

Observatory and the standard automation cost for astronomical facilities, in

reference to the total investment and highlighting all benefits obtained from

this approach and difficulties encountered. The paper also describes the

engineering development of the overall facilities and infrastructures for the

fully automated observatory and a global overview of current status,

pinpointing lessons learned in order to boost observatory operations

performance, achieving scientific targets, maintaining quality requirements,

but also minimizing operation cost and human resources.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.13214v1

Launching the VASCO citizen science project by Beatriz Villarroel et al. on Thursday 24 November

The Vanishing \& Appearing Sources during a Century of Observations (VASCO)

project investigates astronomical surveys spanning a 70 years time interval,

searching for unusual and exotic transients. We present herein the VASCO

Citizen Science Project, that uses three different approaches to the

identification of unusual transients in a given set of candidates:

hypothesis-driven, exploratory-driven and machine learning-driven (which is of

particular benefit for SETI searches). To address the big data challenge, VASCO

combines methods from the Virtual Observatory, a user-aided machine learning

and visual inspection through citizen science. In this article, we demonstrate

the citizen science project, the new and improved candidate selection process

and give a progress report. We also present the VASCO citizen science network

led by amateur astronomy associations mainly located in Algeria, Cameroon and

Nigeria. At the moment of writing, the citizen science project has carefully

examined 12,000 candidate image pairs in the data, and has so far identified

713 objects classified as "vanished". The most interesting candidates will be

followed up with optical and infrared imaging, together with the observations

by the most potent radio telescopes.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2009.10813v3

Radiative Transfer as a Bayesian Linear Regression problem by Frederik De Ceuster et al. on Thursday 24 November

Electromagnetic radiation plays a crucial role in various physical and

chemical processes. Hence, almost all astrophysical simulations require some

form of radiative transfer model. Despite many innovations in radiative

transfer algorithms and their implementation, realistic radiative transfer

models remain very computationally expensive, such that one often has to resort

to approximate descriptions. The complexity of these models makes it difficult

to assess the validity of any approximation and to quantify uncertainties on

the model results. This impedes scientific rigour, in particular, when

comparing models to observations, or when using their results as input for

other models. We present a probabilistic numerical approach to address these

issues by treating radiative transfer as a Bayesian linear regression problem.

This allows us to model uncertainties on the input and output of the model with

the variances of the associated probability distributions. Furthermore, this

approach naturally allows us to create reduced-order radiative transfer models

with a quantifiable accuracy. These are approximate solutions to exact

radiative transfer models, in contrast to the exact solutions to approximate

models that are often used. As a first demonstration, we derive a probabilistic

version of the method of characteristics, a commonly-used technique to solve

radiative transfer problems.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.12547v1