Astro arXiv | astro-ph.IM

Using conditional variational autoencoders to generate images from atmospheric Cherenkov telescopes by Stanislav Polyakov et al. on Thursday 24 November

High-energy particles hitting the upper atmosphere of the Earth produce

extensive air showers that can be detected from the ground level using imaging

atmospheric Cherenkov telescopes. The images recorded by Cherenkov telescopes

can be analyzed to separate gamma-ray events from the background hadron events.

Many of the methods of analysis require simulation of massive amounts of events

and the corresponding images by the Monte Carlo method. However, Monte Carlo

simulation is computationally expensive. The data simulated by the Monte Carlo

method can be augmented by images generated using faster machine learning

methods such as generative adversarial networks or conditional variational

autoencoders. We use a conditional variational autoencoder to generate images

of gamma events from a Cherenkov telescope of the TAIGA experiment. The

variational autoencoder is trained on a set of Monte Carlo events with the

image size, or the sum of the amplitudes of the pixels, used as the conditional

parameter. We used the trained variational autoencoder to generate new images

with the same distribution of the conditional parameter as the size

distribution of the Monte Carlo-simulated images of gamma events. The generated

images are similar to the Monte Carlo images: a classifier neural network

trained on gamma and proton events assigns them the average gamma score 0.984,

with less than 3% of the events being assigned the gamma score below 0.999. At

the same time, the sizes of the generated images do not match the conditional

parameter used in their generation, with the average error 0.33.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.12553v1

Tracking ALMA System Temperature with Water Vapor Data at High Frequency by Hao He et al. on Thursday 24 November

The ALMA observatory is now putting more focus on high-frequency observations

(frequencies from 275-950 GHz). However, high-frequency observations often

suffer from rapid variations in atmospheric opacity that directly affect the

system temperature $T_{sys}$. Current observations perform discrete atmospheric

calibrations (Atm-cals) every few minutes, with typically 10-20 occurring per

hour for high frequency observation and each taking 30-40 seconds. In order to

obtain more accurate flux measurements and reduce the number of atmospheric

calibrations (Atm-cals), a new method to monitor $T_{sys}$ continuously is

proposed using existing data in the measurement set. In this work, we

demonstrate the viability of using water vapor radiometer (WVR) data to track

the $T_{sys}$ continuously. We find a tight linear correlation between

$T_{sys}$ measured using the traditional method and $T_{sys}$ extrapolated

based on WVR data with scatter of 0.5-3%. Although the exact form of the linear

relation varies among different data sets and spectral windows, we can use a

small number of discrete $T_{sys}$ measurements to fit the linear relation and

use this heuristic relationship to derive $T_{sys}$ every 10 seconds.

Furthermore, we successfully reproduce the observed correlation using

atmospheric transmission at microwave (ATM) modeling and demonstrate the

viability of a more general method to directly derive the $T_{sys}$ from the

modeling. We apply the semi-continuous $T_{sys}$ from heuristic fitting on a

few data sets from Band 7 to Band 10 and compare the flux measured using these

methods. We find the discrete and continuous $T_{sys}$ methods give us

consistent flux measurements with differences up to 5%. Furthermore, this

method has significantly reduced the flux uncertainty due to $T_{sys}$

variability for one dataset, which has large precipitable water vapor (PWV)

fluctuation, from 10% to 0.7%.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.12622v1

Sound people speak to Star people A sound experts perspective on astronomy sonification projects by Nicolas Misdariis et al. on Thursday 24 November

The Audible Universe project aims at making dialogue between two scientific

domains investigating two distinct research objects, briefly said, Stars and

Sound. It has been instantiated within a collaborative workshop that started to

mutually acculturate both communities, by sharing and transmitting respective

knowledge, skills and practices. One main outcome of this exchange was a global

view on the astronomical data sonification paradigm that allowed to observe

either the diversity of tools, uses and users (including visually-impaired

people), but also the current limitations and potential ways of improvement.

From this perspective, the current paper presents basic elements gathered and

contextualised by sound experts in their respective fields (sound perception /

cognition, sound design, psychoacoustics, experimental psychology), in order to

anchor sonification for astronomy in a more well-informed, methodological and

creative process.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.12725v1

A comparative study of source-finding techniques in HI emission line cubes using SoFiA, MTObjects, and supervised deep learning by J. A. Barkai et al. on Thursday 24 November

The 21 cm spectral line emission of atomic neutral hydrogen (HI) is one of

the primary wavelengths observed in radio astronomy. However, the signal is

intrinsically faint and the HI content of galaxies depends on the cosmic

environment, requiring large survey volumes and survey depth to investigate the

HI Universe. As the amount of data coming from these surveys continues to

increase with technological improvements, so does the need for automatic

techniques for identifying and characterising HI sources while considering the

tradeoff between completeness and purity. This study aimed to find the optimal

pipeline for finding and masking the most sources with the best mask quality

and the fewest artefacts in 3D neutral hydrogen cubes. Various existing methods

were explored in an attempt to create a pipeline to optimally identify and mask

the sources in 3D neutral hydrogen 21 cm spectral line data cubes. Two

traditional source-finding methods were tested, SoFiA and MTObjects, as well as

a new supervised deep learning approach, in which a 3D convolutional neural

network architecture, known as V-Net was used. These three source-finding

methods were further improved by adding a classical machine learning classifier

as a post-processing step to remove false positive detections. The pipelines

were tested on HI data cubes from the Westerbork Synthesis Radio Telescope with

additional inserted mock galaxies. SoFiA combined with a random forest

classifier provided the best results, with the V-Net-random forest combination

a close second. We suspect this is due to the fact that there are many more

mock sources in the training set than real sources. There is, therefore, room

to improve the quality of the V-Net network with better-labelled data such that

it can potentially outperform SoFiA.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.12809v1

Costs and benefits of automation for astronomical facilities by A. Yanes-Díaz et al. on Thursday 24 November

The Observatorio Astrof\'isico de Javalambre (OAJ{\dag}1) in Spain is a young

astronomical facility, conceived and developed from the beginning as a fully

automated observatory with the main goal of optimizing the processes in the

scientific and general operation of the Observatory. The OAJ has been

particularly conceived for carrying out large sky surveys with two

unprecedented telescopes of unusually large fields of view (FoV): the JST/T250,

a 2.55m telescope of 3deg field of view, and the JAST/T80, an 83cm telescope of

2deg field of view. The most immediate objective of the two telescopes for the

next years is carrying out two unique photometric surveys of several thousands

square degrees, J-PAS{\dag}2 and J-PLUS{\dag}3, each of them with a wide range

of scientific applications, like e.g. large structure cosmology and Dark

Energy, galaxy evolution, supernovae, Milky Way structure, exoplanets, among

many others. To do that, JST and JAST are equipped with panoramic cameras under

development within the J-PAS collaboration, JPCam and T80Cam respectively,

which make use of large format (~ 10k x 10k) CCDs covering the entire focal

plane. This paper describes in detail, from operations point of view, a

comparison between the detailed cost of the global automation of the

Observatory and the standard automation cost for astronomical facilities, in

reference to the total investment and highlighting all benefits obtained from

this approach and difficulties encountered. The paper also describes the

engineering development of the overall facilities and infrastructures for the

fully automated observatory and a global overview of current status,

pinpointing lessons learned in order to boost observatory operations

performance, achieving scientific targets, maintaining quality requirements,

but also minimizing operation cost and human resources.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.13214v1

Launching the VASCO citizen science project by Beatriz Villarroel et al. on Wednesday 23 November

The Vanishing \& Appearing Sources during a Century of Observations (VASCO)

project investigates astronomical surveys spanning a 70 years time interval,

searching for unusual and exotic transients. We present herein the VASCO

Citizen Science Project, that uses three different approaches to the

identification of unusual transients in a given set of candidates:

hypothesis-driven, exploratory-driven and machine learning-driven (which is of

particular benefit for SETI searches). To address the big data challenge, VASCO

combines methods from the Virtual Observatory, a user-aided machine learning

and visual inspection through citizen science. In this article, we demonstrate

the citizen science project, the new and improved candidate selection process

and give a progress report. We also present the VASCO citizen science network

led by amateur astronomy associations mainly located in Algeria, Cameroon and

Nigeria. At the moment of writing, the citizen science project has carefully

examined 12,000 candidate image pairs in the data, and has so far identified

713 objects classified as "vanished". The most interesting candidates will be

followed up with optical and infrared imaging, together with the observations

by the most potent radio telescopes.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2009.10813v3

The Science Performance of JWST as Characterized in Commissioning by Jane Rigby et al. on Wednesday 23 November

This paper characterizes the actual science performance of the James Webb

Space Telescope (JWST), as determined from the six month commissioning period.

We summarize the performance of the spacecraft, telescope, science instruments,

and ground system, with an emphasis on differences from pre-launch

expectations. Commissioning has made clear that JWST is fully capable of

achieving the discoveries for which it was built. Moreover, almost across the

board, the science performance of JWST is better than expected; in most cases,

JWST will go deeper faster than expected. The telescope and instrument suite

have demonstrated the sensitivity, stability, image quality, and spectral range

that are necessary to transform our understanding of the cosmos through

observations spanning from near-earth asteroids to the most distant galaxies.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2207.05632v3

Using wavelets to capture deviations from smoothness in galaxy-scale strong lenses by Aymeric Galan et al. on Wednesday 23 November

Modeling the mass distribution of galaxy-scale strong gravitational lenses is

a task of increasing difficulty. The high-resolution and depth of imaging data

now available render simple analytical forms ineffective at capturing lens

structures spanning a large range in spatial scale, mass scale, and morphology.

In this work, we address the problem with a novel multiscale method based on

wavelets. We tested our method on simulated Hubble Space Telescope (HST)

imaging data of strong lenses containing the following different types of mass

substructures making them deviate from smooth models: (1) a localized small

dark matter subhalo, (2) a Gaussian random field (GRF) that mimics a

nonlocalized population of subhalos along the line of sight, and (3)

galaxy-scale multipoles that break elliptical symmetry. We show that wavelets

are able to recover all of these structures accurately. This is made

technically possible by using gradient-informed optimization based on automatic

differentiation over thousands of parameters, which also allow us to sample the

posterior distributions of all model parameters simultaneously. By

construction, our method merges the two main modeling paradigms - analytical

and pixelated - with machine-learning optimization techniques into a single

modular framework. It is also well-suited for the fast modeling of large

samples of lenses. All methods presented here are publicly available in our new

Herculens package.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2207.05763v2

Application of convolutional neural networks for data analysis in TAIGA-HiSCORE experiment by Anna Vlaskina et al. on Wednesday 23 November

The TAIGA experimental complex is a hybrid observatory for high-energy

gamma-ray astronomy in the range from 10 TeV to several EeV. The complex

consists of such installations as TAIGA- IACT, TAIGA-HiSCORE and a number of

others. The TAIGA-HiSCORE facility is a set of wide-angle synchronized stations

that detect Cherenkov radiation scattered over a large area. TAIGA-HiSCORE data

provides an opportunity to reconstruct shower characteristics, such as shower

energy, direction of arrival, and axis coordinates. The main idea of the work

is to apply convolutional neural networks to analyze HiSCORE events,

considering them as images. The distribution of registration times and

amplitudes of events recorded by HiSCORE stations is used as input data. The

paper presents the results of using convolutional neural networks to determine

the characteristics of air showers. It is shown that even a simple model of

convolutional neural network provides the accuracy of recovering EAS parameters

comparable to the traditional method. Preliminary results of air shower

parameters reconstruction obtained in a real experiment and their comparison

with the results of traditional analysis are presented.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2211.12197v1

First release of Apertif imaging survey data by Elizabeth A. K. Adams et al. on Wednesday 23 November

(Abridged) Apertif is a phased-array feed system for WSRT, providing forty

instantaneous beams over 300 MHz of bandwidth. A dedicated survey program

started on 1 July 2019, with the last observations taken on 28 February 2022.

We describe the release of data products from the first year of survey

operations, through 30 June 2020. We focus on defining quality control metrics

for the processed data products. The Apertif imaging pipeline, Apercal,

automatically produces non-primary beam corrected continuum images,

polarization images and cubes, and uncleaned spectral line and dirty beam cubes

for each beam of an Apertif imaging observation. For this release, processed

data products are considered on a beam-by-beam basis within an observation. We

validate the continuum images by using metrics that identify deviations from

Gaussian noise in the residual images. If the continuum image passes

validation, we release all processed data products for a given beam. We apply

further validation to the polarization and line data products. We release all

raw observational data from the first year of survey observations, for a total

of 221 observations of 160 independent target fields, covering approximately

one thousand square degrees of sky. Images and cubes are released on a per beam

basis, and 3374 beams are released. The median noise in the continuum images is

41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V

polarization image. The median angular resolution is 11.6"/sin(Dec). The median

noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6

mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20

atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We

also provide primary beam images for each individual Apertif compound beam. The

data are made accessible using a Virtual Observatory interface.

arXiv: http://arxiv.org/abs/http://arxiv.org/abs/2208.05348v2