Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

By KevTechifyTechnology
Download on the App Store

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA) episodes

  • Implement DHCPv4 - DHCPv4 - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 50

    In this episode we are going to look at configuring Implement DHCPv4.

    As the network technician for our company, we are tasked with configuring a Cisco router as a DHCP server to provide dynamic allocation of addresses to clients on the network. We are also required to configure the edge router as a DHCP client so that it receives an IP address from the ISP network. Since the server is centralized, we will need to configure the two LAN routers to relay DHCP traffic between the LANs and the router that is serving as the DHCP server.

    We will be Configuring a Router as a DHCP Server, Configuring DHCP Relay, and Configuring a Router as a DHCP Client.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    DHCPv4

    Lab 7.4.1 - Implement DHCPv4

    Podcast Number: 50

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    31 min
  • Configure DHCPv4 - DHCPv4 - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 49

    In this episode we are going to look at configuring Configure DHCPv4.

    A dedicated DHCP server is scalable and relatively easy to manage but it can be costly to have one at every location in a network. However, a Cisco router can be configured to provide DHCP services without the need for a dedicated server. As the network technician for our company, we have been assigned the task of configuring a Cisco router as a DHCP server. We are also required to configure the edge router as a DHCP client so that it receives an IP address from the ISP network.

    We will be Configuring a Router as a DHCP Server, Configuring DHCP Relay, Configuring a Router as a DHCP Client, and finally Verifying DHCP and Connectivity.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    DHCPv4

    Lab 7.2.10 - Configure DHCPv4

    Podcast Number: 49

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    36 min
  • Implement EtherChannel - EtherChannel - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 48

    In this episode we are going to look at Implementing EtherChannel.

    We have been assigned the task of designing an EtherChannel implementation for a company that wants to improve the performance of their switch trunk links. We will try several different ways of implementing the EtherChannel links in order to evaluate which is the best for the company. We will build the topology, configure trunk ports, and implement LACP and PAgP EtherChannels.

    We will be Building the network and Configuring EtherChannel.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    EtherChannel

    Lab 6.4.1 - Implement EtherChannel

    Podcast Number: 48

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    34 min
  • Troubleshoot EtherChannel - EtherChannel - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 47

    In this episode we are going to look at configuring Troubleshoot EtherChannel.

    A junior technician recently configured four switches. Users are complaining that the network is running slowly, and they would like us to investigate.

    We will be Examining the Physical Layer and Correct Switch Port Mode Issues, Identifying and Correcting Port Channel Assignment Issues, and finally Identify and Correct Port Channel Protocol Issues.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    EtherChannel

    Lab 6.3.4 - Troubleshoot EtherChannel

    Podcast Number: 47

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    34 min
  • Configure EtherChannel - EtherChannel - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 46

    In this episode we are going to look at configuring Configure EtherChannel.

    Three switches have just been installed. There are redundant uplinks between the switches. As configured, only one of these links can be used; otherwise, a bridging loop might occur. However, using only one link utilizes only half of the available bandwidth. EtherChannel allows up to eight redundant links to be bundled together into one logical link. In this lab, we will configure Port Aggregation Protocol (PAgP), a Cisco EtherChannel protocol, and Link Aggregation Control Protocol (LACP), an IEEE 802.3ad open standard version of EtherChannel.

    We will be Configuring Basic Switch Settings, Configuring an EtherChannel with Cisco PAgP, Configuring an 802.3ad LACP EtherChannel, and Configuring a Redundant EtherChannel Link.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    EtherChannel

    Lab 6.2.4 - Configure EtherChannel

    Podcast Number: 46

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    52 min
  • Investigate STP Loop Prevention - STP Concepts - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 45

    In this episode we are going to look at configuring Investigate STP Loop Prevention.

    In this activity we will use Packet Tracer to observe the operation of Spanning Tree Protocol in a simple switched network that has redundant paths.

    We will be observing spanning-tree port states and watch the spanning-tree convergence process, Describe the operation of Spanning Tree Protocol, and finally Explain how Spanning Tree Protocol prevents switching loops while allowing redundancy in switched networks.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    STP Concepts

    Lab 5.1.9 - Investigate STP Loop Prevention

    Podcast Number: 45

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    20 min
  • Inter-VLAN Routing Challenge - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 44

    In this episode we are going to look at configuring Inter-VLAN Routing Challenge.

    In this activity, we will demonstrate and reinforce your ability to implement inter-VLAN routing, including configuring IP addresses, VLANs, trunking, and subinterfaces.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    Inter-VLAN Routing

    Lab 4.5.1 - Inter-VLAN Routing Challenge

    Podcast Number: 44

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    31 min
  • Troubleshoot Inter-VLAN Routing - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 43

    In this episode we are going to look at configuring Troubleshoot Inter-VLAN Routing.

    In this activity, we will troubleshoot connectivity problems caused by improper configurations related to VLANs and inter-VLAN routing.

    We will be Locating Network Problems, Implementing the Solution, and Verifying Network Connectivity.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    Inter-VLAN Routing

    Lab 4.4.8 - Troubleshoot Inter-VLAN Routing

    Podcast Number: 43

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    26 min
  • Configure Layer 3 Switching and Inter-VLAN Routing - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 42

    In this episode we are going to look at configuring Configure Layer 3 Switching and Inter-VLAN Routing.

    A multilayer switch like the Cisco Catalyst 3650 is capable of both Layer 2 switching and Layer 3 routing. One of the advantages of using a multilayer switch is this dual functionality. A benefit for a small to medium-sized company would be the ability to purchase a single multilayer switch instead of separate switching and routing network devices. Capabilities of a multilayer switch include the ability to route from one VLAN to another using multiple switched virtual interfaces (SVIs), as well as the ability to convert a Layer 2 switchport to a Layer 3 interface.

    We will be Configuring Layer 3 Switching, Configuring Inter-VLAN Routing, and Configuring IPv6 Inter-VLAN Routing.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    Inter-VLAN Routing

    Lab 4.3.8 - Configure Layer 3 Switching and Inter-VLAN Routing

    Podcast Number: 42

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    40 min
  • Configure Router-on-a-Stick Inter-VLAN Routing - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 41

    In this episode we are going to look at configuring Configure Router-on-a-Stick Inter-VLAN Routing.

    In this activity we will configure VLANs and inter-VLAN routing. We will then enable trunk interfaces and verify connectivity between VLANs.

    We will be discussing Adding VLANs to a Switch, Configuring Subinterfaces, and Testing Connectivity with Inter-VLAN Routing.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)

    Inter-VLAN Routing

    Lab 4.2.7 - Configure Router-on-a-Stick Inter-VLAN Routing

    Podcast Number: 41

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    29 min

About Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

From the publisher's feed

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)