Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

By KevTechifyTechnology
Download on the App Store

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA) episodes

  • Troubleshooting Challenge - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 30

    In this episode we are going to look at configuring Troubleshooting Challenge.

    After an update to the network, some devices were misconfigured. We must correct the configurations and verify that all the PCs can access the Web server, router, and the switches. In addition, all PCs should be able to access R1 using SSH. We should verify connectivity for both IPv4 and IPv6 except for the switches.

    We will be discussing Troubleshoot common issues in a LAN.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Build a Small Network

    Lab 17.8.3 - Troubleshooting Challenge

    Pod Number: 30

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    47 min
  • Skills Integration Challenge - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 29

    In this episode we are going to look at configuring Skills Integration Challenge.

    The router Central, ISP cluster, and the Web server are completely configured. We must create a new IPv4 addressing scheme that will accommodate 4 subnets using the 192.168.0.0/24 network. The IT department requires 25 hosts. The Sales department needs 50 hosts. The subnet for the rest of the staff requires 100 hosts. A Guest subnet will be added in the future to accommodate 25 hosts. We must also finish the basic security settings and interface configurations on the router. Then, we will configure the SVI interface and basic security settings on the switches.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Build a Small Network

    Lab 17.8.2 - Skills Integration Challenge

    Pod Number: 29

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    1 hr 19 min
  • Troubleshoot Connectivity Issues - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 28

    In this episode we are going to look at configuring Troubleshoot Connectivity Issues.

    Users are reporting that they cannot access the web server after a recent upgrade that included adding a second DNS server. We must determine the cause and attempt to resolve the issues for the users. Clearly document the issues and any solution(s). We do not have access to the devices in the cloud or the web server. Escalate the problem if necessary.

    We will be discussing troubleshoot and resolve connectivity issues, if possible. Otherwise, the issues should be clearly documented so they can be escalated.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Build a Small Network

    Lab 17.7.7 - Troubleshoot Connectivity Issues

    Pod Number: 28

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

    48 min
  • Interpret show Command Output - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 27

    In this episode we are going to look at configuring Interpret show Command Output.

    This activity is designed to reinforce the use of router show commands. We are not required to configure, but rather to examine the output of several show commands.

    We will be discussing Analyze Show Command Output and finally Reflection Questions.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Build a Small Network

    Lab 17.5.9 - Interpret show Command Output

    Pod Number: 27

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     


    31 min
  • Secure Network Devices - Network Security Fundamentals - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 26

    In this episode we are going to look at configuring Secure Network Devices.

    In this activity we will configure a router and a switch based on a list of requirements.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Network Security Fundamentals

    Lab 16.5.1 - Secure Network Devices

    Pod Number: 26

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    39 min
  • Configure Secure Passwords and SSH - Network Security Fundamentals - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 25

    In this episode we are going to look at configuring Configure Secure Passwords and SSH.

    The network administrator has asked us to prepare RTA and SW1 for deployment. Before they can be connected to the network, security measures must be enabled.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com


    YoTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Network Security Fundamentals

    Lab 16.4.6 - Configure Secure Passwords and SSH

    Pod Number: 25

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    40 min
  • TCP and UDP Communications - Transport Layer - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 24

    In this episode we are going to look at configuring TCP and UDP Communications.

    This simulation activity is intended to provide a foundation for understanding TCP and UDP in detail. Simulation mode provides us the ability to view the state of different PDUs as they travel through the network. Simulation mode enables us to view each of the protocols and the associated PDUs. The steps following lead us through the process of requesting network services using various applications that are available on a client PC. We will explore the functionality of the TCP and UDP protocols, multiplexing, and the function of port numbers in determining which local application requested the data or is sending the data.

    We will be discussing Generate Network Traffic in Simulation Mode and finally Examine the Functionality of the TCP and UDP Protocols.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Transport Layer

    Lab 14.8.1 - TCP and UDP Communications

    Pod Number: 24

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    1 hr 7 min
  • Use ICMP to Test and Correct Network Connectivity - ICMP - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 23

    In this episode we are going to look at configuring Use ICMP to Test and Correct Network Connectivity.

    Customers have been complaining that they can’t reach some network resources. We have been asked to test connectivity in the network. We will use ICMP to find out which resources are unreachable and the locations from which they can’t be reached. Then, we will use trace to locate the point at which network connectivity is broken. Finally, we will fix the errors that you find to restore connectivity to the network.

    We will be discussing In this lab we will use ICMP to test network connectivity and locate network problems, We will also correct simple configuration issues and restore connectivity to the network, Use ICMP to locate connectivity issues, and finally Configure network devices to correct connectivity issues.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    ICMP

    Lab 13.3.1 - Use ICMP to Test and Correct Network Connectivity

    Pod Number: 23

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    29 min
  • Use Ping and Traceroute to Test Network Connectivity - ICMP - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 22

    In this episode we are going to look at configuring Use Ping and Traceroute to Test Network Connectivity.

    There are connectivity issues in this activity. In addition to gathering and documenting information about the network, we will locate the problems and implement acceptable solutions to restore connectivity.

    We will be discussing Test and Restore IPv4 Connectivity and finally Test and Restore IPv6 Connectivity.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    ICMP

    Lab 13.2.7 - Use Ping and Traceroute to Test Network Connectivity

    Pod Number: 22

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    39 min
  • Verify IPv4 and IPv6 Addressing - ICMP - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 21

    In this episode we are going to look at configuring Verify IPv4 and IPv6 Addressing.

    Dual-stack allows IPv4 and IPv6 to coexist on the same network. We will investigate a dual-stack implementation including documenting the IPv4 and IPv6 configuration for end devices, testing connectivity for both IPv4 and IPv6 using ping, and tracing the path from end to end for IPv4 and IPv6.

    We will be discussing Complete the Addressing Table Documentation, Test Connectivity Using Ping, and Discover the Path by Tracing the Route.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify


    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    ICMP

    Lab 13.2.6 - Verify IPv4 and IPv6 Addressing

    Pod Number: 21

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    34 min

About Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

From the publisher's feed

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)