Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

By KevTechifyTechnology
Download on the App Store

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA) episodes

  • Examine the ARP Table - Address Resolution - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 10

    In this episode we are going to look at Examine the ARP Table.

    This activity is optimized for viewing PDUs. The devices are already configured. We will gather PDU information in simulation mode and answer a series of questions about the data you collect.

    We will be discussing Examine an ARP Request, Examine a Switch MAC Address Table, and Examine the ARP Process in Remote Communications.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Address Resolution

    Lab 9.2.9 - Examine the ARP Table

    Pod Number: 10

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    30 min
  • Identify MAC and IP Addresses - Address Resolution - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 9

    In this episode we are going to look at Configuring and Identifying MAC and IP Addresses.

    This activity is optimized for viewing PDUs. The devices are already configured. We will gather PDU information in simulation mode and answer a series of questions about the data you collect.

    We will be discussing Gather PDU Information for Local Network Communication and Gather PDU Information for Remote Network Communication.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Address Resolution

    Lab 9.1.3 - Identify MAC and IP Addresses

    Lab Number: 9

    Pod Number: 9

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     


    1 hr 17 min
  • Connect the Physical Layer - Physical Layer - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 8

    In this episode we are going to look at Configuring and Connecting the Physical Layer.

    We will explore the different options available on internetworking devices. We will also be required to determine which options provide the necessary connectivity when connecting multiple devices. Finally, we will add the correct modules and connect the devices.

    We will be discussing Identify Physical Characteristics of Internetworking Devices, Select Correct Modules for Connectivity, Connect Devices, and Check Connectivity.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Physical Layer

    Lab 4.7.1 - Connect the Physical Layer

    Lab Number: 8

    Pod Number: 8

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    40 min
  • Connect a Wired and Wireless LAN - Physical Layer - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 7

    In this episode we are going to look at Configuring and Connecting a Wired and Wireless LAN.

    When working in a lab environment or a corporate setting, you should know how to select the appropriate cable and how to properly connect devices. We will examine device configurations, selecting the proper cable based on the configuration, and connecting the devices. We will also explore the physical view of the network in Packet Tracer.

    We will be discussing Connect to the Cloud, Connect Router0, Connect Remaining Devices, Verify Connections, Examine the Physical Topology.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Physical Layer

    Lab 4.6.5 - Connect a Wired and Wireless LAN

    Lab Number: 7

    Pod Number: 7

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     


    35 min
  • Investigate the TCP/IP and OSI Models in Action - Protocols and Models - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 6

    In this episode we are going to look at Investigate the TCP/IP and OSI Models in Action.

    This activity is intended to provide a foundation for understanding the TCP/IP protocol suite and the relationship to the OSI model. Allows you to view the data contents being sent across the network at each layer. As data moves through the network, it is broken down into smaller pieces and identified so that the pieces can be put back together when they arrive at the destination. Each piece is assigned a specific name (protocol data unit [PDU]) and associated with a specific layer of the TCP/IP and OSI models. Simulation mode enables you to view each of the layers and the associated PDU. The following steps lead the user through the process of requesting a web page from a web server by using the web browser application available on a client PC Even though much of the information displayed will be discussed in more detail later, this is an opportunity to explore the functionality and be able to visualize the encapsulation process.

    We will be discussing Examine HTTP Web Traffic, Display Elements of the TCP/IP Protocol Suite.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Protocols and Models

    Lab 3.5.5 - Investigate the TCP/IP and OSI Models in Action

    Lab Number: 6

    Pod Number: 6

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

    28 min
  • Basic Switch and End Device Configuration - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 5

    In this episode we are going to look at Configuring Basic Switch and End Device Configuration.

    As a recently hired LAN technician, our network manager has asked us to demonstrate our ability to configure a small LAN. Our tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. We are to use two switches and two hosts/PCs on a cabled and powered network.

    We will be discussing Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI), use Cisco IOS commands to specify or limit access to the device configurations, use IOS commands to save the running configuration, configure two host devices with IP addresses, and finally verify connectivity between the two PC end devices.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)

    Configuration Examples for Introduction to Networks v1 (ITN)

    Basic Switch and End Device Configuration

    Lab 2.9.1 - Basic Switch and End Device Configuration

    Lab Number: 5

    Pod Number: 5

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    27 min
  • Implement Basic Connectivity - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 4

    In this episode we are going to look at Configuring and Implementing Basic Connectivity.

    We will first create a basic switch configuration. Then, we will implement basic connectivity by configuring IP addressing on switches and PCs. When the IP addressing configuration is complete, we will use various show commands to verify the configuration and use the ping command to verify basic connectivity between devices.

    We will be discussing performing a Basic Configuration on switches, Configuring the PCs, and Configuring the Switch Management Interface.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)                                                                                                                                      

    Configuration Examples for Introduction to Networks v1 (ITN)

    Basic Switch and End Device Configuration

    Lab 2.7.6 - Implement Basic Connectivity

    Lab Number: 4

    Pod Number: 4

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

     

    32 min
  • Configure Initial Switch Settings - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 3

    In this episode we are going to look at Configuring Initial Switch Settings.

    We will perform basic switch configuration tasks. We will secure access to the command-line interface (CLI) and console ports using encrypted and plain text passwords. We will also learn how to configure messages for users logging into the switch. These message banners are also used to warn unauthorized users that access is prohibited.

    We will be discussing verifying the Default Switch Configuration, Configuring a Basic Switch Configuration, Configuring a MOTD Banner, and Saving Configuration Files to NVRAM.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)                                                                                                                                      

    Configuration Examples for Introduction to Networks v1 (ITN)

    Basic Switch and End Device Configuration

    Lab 2.5.5 - Configure Initial Switch Settings

    Lab Number: 3

    Pod Number: 3

    Season: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

    37 min
  • Navigate the IOS - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | pod 2

    In this episode we are going to look at Navigating the IOS.

    We'll look at the skills necessary for navigating the Cisco IOS, such as different user access modes, various configuration modes, and common commands used on a regular basis. We will also practice accessing the context-sensitive Help by configuring the clock command.

    We will be looking at Establishing Basic Connections, Accessing the CLI, and finally Explore Help, Explore EXEC Modes, Set the Clock.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)                                                                                                            

    Configuration Examples for Introduction to Networks v1 (ITN)

    Basic Switch and End Device Configuration

    Lab 2.3.7 - Navigate the IOS

    Lab Number: 2

    Pod Number: 2

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

    25 min
  • Network Representation - Networking Today - Configuration Examples for Introduction to Networks - CCNA - KevTechify | pod 1

    In this episode we are going to look at Network Representation.

    We will be discussing the network model that incorporates many of the technologies that you will master in your CCNA studies. It represents a simplified version of how a small to medium-sized business network might look. Feel free to explore the network on your own.

    Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).

    Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.

    All my details and contact information can be found on my website, https://KevTechify.com

    YouTube Channel: https://YouTube.com/KevTechify

    -------------------------------------------------------

    Cisco Certified Network Associate (CCNA)                                                                                                                                

    Configuration Examples for Introduction to Networks v1 (ITN)

    Networking Today

    Lab 1.5.7 - Network Representation

    Lab Number: 1

    Pod Number: 1

    -------------------------------------------------------

    Equipment I like.

    Home Lab ►► https://kit.co/KevTechify/home-lab

    Networking Tools ►► https://kit.co/KevTechify/networking-tools

    Studio Equipment ►► https://kit.co/KevTechify/studio-equipment

     

    27 min

About Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)

From the publisher's feed

Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)