
Sign up to save your podcasts
Or


In this episode we are going to look at configuring Implement a Subnetted IPv6 Addressing Scheme.
Network administrators must know how to implement IPv6 in their networks. We have been asked to set up a network for use by the sales staff for a customer demonstration. The network will use a series of consecutive IPv6 subnets for four LANs. Our job is to assign the subnets to the LANs and configure the routers and PCs with IPv6 addressing. We need to make certain to configure all the necessary components for IPv6 routing on the routers.
We will be discussing Determine IPv6 subnets and addressing scheme, Configure IPv6 addressing on routers and PCs, and finally Verify IPv6 connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv6 Addressing
Lab 12.9.1 - Implement a Subnetted IPv6 Addressing Scheme
Pod Number: 20
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring Configure IPv6 Addressing.
We will practice configuring IPv6 addresses on a router, servers, and clients. We will also practice verifying your IPv6 addressing implementation.
We will be discussing Configure IPv6 Addressing on the Router, Configure IPv6 Addressing on Servers, Configure IPv6 Addressing on Clients, and finally Test and Verify Network Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv6 Addressing
Lab 12.6.6 - Configure IPv6 Addressing
Pod Number: 19
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring VLSM Design and Implementation Practice.
We are given a /24 network address to use to design a VLSM addressing scheme. Based on a set of requirements, we will assign subnets and addressing, configure devices and verify connectivity.
We will be discussing Examine the Network Requirements, Design the VLSM Addressing Scheme, and finally Assign IP Addresses to Devices and Verify Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv4 Addressing
Lab 11.9.3 - VLSM Design and Implementation Practice
Pod Number: 18
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring Subnetting Scenario.
We are given the network address of 192.168.100.0/24 to subnet and provide the IP addressing for the Packet Tracer network. Each LAN in the network requires at least 25 addresses for end devices, the switch and the router. The connection between R1 to R2 will require an IP address for each end of the link.
We will be discussing Design an IP Addressing Scheme and Assign IP Addresses to Network Devices and Verify Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv4 Addressing
Lab 11.7.5 - Subnetting Scenario
Pod Number: 17
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring Subnet an IPv4 Network.
We will subnet the Customer network into multiple subnets. The subnet scheme should be based on the number of host computers required in each subnet, as well as other network considerations, like future network host expansion. After we have created a subnetting scheme and completed the table by filling in the missing host and interface IP addresses, we will configure the host PCs, switches and router interfaces After the network devices and host PCs have been configured, we will use the ping command to test for network connectivity.
We will be discussing Design an IPv4 Network Subnetting Scheme, Configure the Devices, and finally Test and Troubleshoot the Network.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv4 Addressing
Lab 11.5.5 - Subnet an IPv4 Network
Pod Number: 16
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring Basic Device Configuration.
Our network manager is impressed with our performance in our job as a LAN technician. She would like us to demonstrate your ability to configure a router that connects two LANs. Our tasks include configuring basic settings on a router and a switch using the Cisco IOS. We will also configure IPv6 addresses on network devices and hosts. We will then verify the configurations by testing end-to-end connectivity. Our goal is to establish connectivity between all devices.
We will be discussing Complete the network documentation, Perform basic device configurations on a router and a switch, an finally Verify connectivity and troubleshoot any issues.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.4.3 - Basic Device Configuration
Pod Number: 15
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring Troubleshoot Default Gateway Issues.
For a device to communicate across multiple networks, it must be configured with an IP address, subnet mask, and a default gateway. The default gateway is used when the host wants to send a packet to a device on another network. The default gateway address is generally the address of the router interface which is attached to the local network that the host is connected to. In this activity, you will finish documenting the network. You will then verify the network documentation by testing end-to-end connectivity and troubleshooting issues.
The troubleshooting method we will use consists of the following steps:
► Verify the network documentation and use tests to isolate problems.
► Determine an appropriate solution for a given problem.
► Implement the solution.
► Test to verify the problem is resolved.
► Document the solution.
Throughout your CCNA studies, you will encounter different descriptions of the troubleshooting method, as well as different ways to test and document issues and solutions. This is intentional. There is no set standard or template for troubleshooting.
We will be discussing Verify Network Documentation and Isolate Problems, and finally Implement, Verify, and Document Solutions.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.3.5 - Troubleshoot Default Gateway Issues
Pod Number: 14
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring Connect a Router to a LAN.
In this activity, we will use various show commands to display the current state of the router. We will then use the Addressing Table to configure router Ethernet interfaces. Finally, we will use commands to verify and test your configurations.
We will be discussing Display Router Information, Configure Router Interfaces, and Verify the Configuration.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.3.4 - Connect a Router to a LAN
Pod Number: 13
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at configuring Configure Initial Router Settings.
We will perform basic router configuration tasks. We will secure access to the CLI and console port using encrypted and plain-text passwords. We will also configure messages for users who are logging into the router. These banners warn unauthorized users that access is prohibited. Finally, we will verify and save your running configuration.
We will be discussing Verify the Default Router Configuration, Configure and Verify the Initial Router Configuration, and Save the Running Configuration File.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.1.4 - Configure Initial Router Settings
Pod Number: 12
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
In this episode we are going to look at Configuring IPv6 Neighbor Discovery.
In order for a device to communicate with another device, the MAC address of the destination must be known. With IPv6, a process called Neighbor Discovery using NDP or ND protocol is responsible for determining the destination MAC address. We will gather PDU information in simulation mode to better understand the process.
We will be discussing IPv6 Neighbor Discovery Local Network and IPv6 Neighbor Discovery Remote Network.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Address Resolution
Lab 9.3.4 - IPv6 Neighbor Discovery
Pod Number: 11
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
From the publisher's feed
Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)