June 21, 2024

Ender 5 S1 Mods, Printing ASA, .06 or .04 Nozzle? and MORE!!!

51 minutes

This Episodes Questions:

Just finished the latest episode where you guys talked about FreeCAD. I almost snapped when Guy said it was not parametric, or that "just recently changed". It's been like that since day one, almost 22 years ago.

What Guy referred to was the Topological Naming Problem, the thing that happens when you remove a feature that another feature depends upon. Something that was mentioned happening to Guy in Fusion as well. Have great news, in the 0.22dev branch it has code that mitigates that issue (can never be solved, because there is an infinite number of possible models to design and an infinite ways of breaking things) and in August or September the 1.0 version is going to be released with that fix and many, many improvements present in the 0.22dev. I encourage you to be on the fence for when 1.0 is released.

And yes, FreeCAD uses the graphics card with OpenGL.

Cheers from Argentina, Gabriel

The Ender 5-S1 is my only machine. Aside from the sonic pad and the acrylic enclosure, are there any mods that you'd consider worth the time and investment? If yes, what would be the cost and how tricky are they to pull off for someone with good DIY skills and equipment, but only moderate 3d printer knowledge? I'm in the UK (I can do the currency conversion, but not all products available to you might be available easily here, though I'm willing to import if it's worth it).

Thanks again! Simon Troup

What are the major categories or different applications you would classify printers into? I’m thinking along the lines of a voron 0 for small high quality, something with a large print volume, something enclosed and high precision, etc. I ask this as I consider selecting a second printer, what are some considerations to decide on what would most expand my capabilities?

I have an E3V3 KE with some minor mods (structural, silicone spacers, nozzles) and I have it well tuned and printing great. Do I get a second one for continuity and ease of use, or would I be better served getting something to fit a different niche?

Love the podcast and all the different angles you bring to the discussion!Ben

I was curious to know what type of ASA you were trying to print as I have printed E-Sun, Inland and Polymaker. I have never had a problem with keeping it on the bed. I've even printed it on an ender 3 pro in the open air and it stuck just fine. I do use Magioo on my print beds, so just curious what you guys were using that was warping. I have a K1, an Ender 3 pro and Ender 3 pro s1 and a sv06 Sovol and printed ASA just fine on all of them. The SV06 and the s1 are in those cheap creality plastic enclosures.

Thank you for the response. Chris

I love the podcast. Guy, I've been following you on the fine woodworking side for several years, and gravitated to this podcast when I got my first 3D printer, an AnyCubic Kobra 2 along with Raspberry Pi and Octoprint, in December. I've upgraded to Bambu Labs X1 Carbon. The Kobra 2/Raspberry Pi required me to spend my time mastering the technology, rather than just printing cool stuff. I realized I did not need another rabbit hole, so I went with the X1. The analogy I use when asked by other 3Ders is that rather than being the guy who soups up the car, I just want to go for a ride! But, I digress.

I've heard mixed reviews on the advantages of a 0.6mm hot end vs. the stock 0.4mm that comes with the printer. Speed and strength are noted as the primary advantages, but at some cost to quality. Many of the prints I make are for use as jigs in the shop or other household hacks, so even though I love the quality of the prints, I could sacrifice that for speed. I've read many comments on reddit that say the speed improvement claim is exaggerated. Can you guys set me straight? Paul

...more