
Sign up to save your podcasts
Or


In this episode, we address the importance of standard-compliant calibrations of testing equipment, how often they should be performed and the difference between ISO 9001 and IEC 17025 standard calibrations.
For example, compared with conventional ISO 9001 manufacturer calibrations, calibrations according to IEC 17025 are becoming more and more the standard in various countries.
Dietmar Gehrmann, head of OMICRON Calibrations, describes the need for certified calibrations, particularly calibrations according to the IEC 17025 standard. He also highlights the services of OMICRON Calibrations, which was founded in 2020 as a globally recognized, state-accredited calibration laboratory according to IEC 17025 and is distinguished by calibration services that meet the highest international standards.
More information about OMICRON Calibrations is available at
We welcome your questions and feedback. Simply send us an email to [email protected]
Please join us to listen to the next episode of Energy Talks!
To ensure reliable and safe operation of power transformers, it is key to assess the condition of the insulation system during a transformer’s life cycle.
Partial discharge (PD) measurements, for example, are a highly effective and non-destructive tool for the detection, assessment, and localization of insulation weak spots, which could eventually lead to transformer failure.
In this episode, OMICRON PD measurement experts Michael Krüger and Udo Ranninger describe not only the importance of onsite PD testing on both oil-filled and dry type power transformers, but also how it is performed to effectively pinpoint insulation defects not revealed by other tests, including Dissolved Gas Analysis (DGA). An actual PD measurement case study is presented to illustrate these points.
More information about PD testing and monitoring is available at: omicronenergy.com/pd-testing
We welcome your questions and feedback. Simply send us an email to [email protected].
Please join us to listen to the next episode of Energy Talks.
In this episode, we are talking about the upcoming OMICRON Diagnostic Forum.
The next OMICRON Diagnostic Forum takes place on March 24-25, 2021. This event is scheduled every 2 years, and has become an OMICRON tradition of sharing knowledge, experiences and best cases with industry peers about diagnostic testing on a wide variety of power system equipment.
Event organizers Verena Rein and Tobias Schmutzhard describe how this year’s OMICRON Diagnostic Forum will be presented completely online and features an interactive program of diagnostic topics to choose from. There is also a social event in which participants can share ideas and experiences with each other online.
Get more information and register for this year’s event on the event page at events.omicronenergy.com/df or contact the event organizers by email at [email protected]
We welcome your questions and feedback. Simply send us an email to [email protected].
Please join us to listen to the next episode of Energy Talks.
The OMICRON Academy is an important pillar of knowledge sharing at OMICRON. For more than 25 years, it has offered a wide variety of theoretical and practical training courses on power system testing topics at its training centers around the world for energy suppliers, industrial companies, service providers, and electrical equipment manufacturers.
Of course, due to current travel restrictions, it is not possible to attend in-person training courses around the world as before.
In this episode, Oliver Janke, Training Manager at OMICRON Academy, tells us about how the Academy is making its online training courses just as interactive as classroom training and even more accessible to participants worldwide.
Visit www.omicronenergy.com (look under Training) for more information about available webinars and online training courses from OMICRON Academy.
We welcome your questions and feedback. Simply send us an email to [email protected].
Please join us to listen to the next episode of Energy Talks.
It goes without saying that we are still going through challenging times, but it is always amazing to hear stories about how colleagues in this industry continue to find innovative ways to still get the job done in order to ensure power system reliability.
One such colleague is Gustav Lundqvist, who has joined us for this episode. He is the CEO and founder of Kraftdiagnos – a service company that provides electrical utility companies in Sweden with diagnostic measurements on medium- and high-voltage equipment.
Gustav spent the past 2 years as a road warrior while growing his business, covering incredible distances to perform measurements on medium voltage stations, power lines, telephone towers and wind parks throughout Sweden. Some of this travel was by car, but mostly he hiked great distances to reach remote measurement sites.
More information about the OMICRON power system testing solutions mentioned in this episode is available under www.omicronenergy.com.
We welcome your questions and feedback. Simply send us an email to [email protected].
Please join us to listen to the next episode of Energy Talks.
The reliable operation of rotating electrical machines, whether generators or motors, is essential for continuous power generation and critical industrial processes.
However, defects resulting from operational stresses and aging, can cause rotating machines to fail. Various electrical testing methods allow you to identify developing problems throughout a machine’s service life.
But which electrical tests are essential, and when should they be performed to assess machine condition?
With us to answer these questions and to offer some insight on this topic is Fabian Öttl, product manager and expert for rotating machines testing at OMICRON.
OMICRON has several years of experience in rotating machine testing, and offers you the matching solution for your application. Be sure to visit our website for more information at
We welcome your questions and feedback. Simply send us an email to [email protected].
Please join us to listen to the next episode of Energy Talks.
Partial discharge (PD) is a very reliable indicator of potential failure-causing faults in electrical equipment insulation. Regular PD testing and PD monitoring are used to reliably assess insulation condition throughout equipment lifetime. In this episode, two of OMICRON’s PD experts – Patrick Zander and Samuel Scheller – describe the differences between PD testing and monitoring, when they are used and how they complement each other.
Show Notes:
PD testing and monitoring play a critical role in assessing insulation condition, focusing maintenance efforts and preventing the pre-mature failure of electrical equipment, such as power transformers, generators, motors, switchgear and power cables.
There are various methods of PD testing and monitoring, but when is each method ideally used to detect potential failure-causing insulation defects? What are their differences and how do they complement each other?
To answer these questions and to offer some insight on this topic is Patrick Zander, a specialist in PD testing and monitoring at OMICRON, and Samuel Scheller, the OMICRON product manager for PD monitoring solutions.
OMICRON has several years of experience in PD testing and monitoring and offers you the matching solution for your application. Be sure to visit our website for more information at
We welcome your questions and feedback. Simply send us an email to [email protected].
Please join us to listen to the next episode of Energy Talks.
From the publisher's feed

231 Listeners

66 Listeners

21 Listeners