While developing boards, there are oftentimes we want to program ESP chips without going through the onboard USB port; this adapter will help us (and others) do that! It has a CP2102N USB-serial chip (https://www.digikey.com/short/bm7n3p5z) with RX/TX signal LEDs and two transistors wired up to the DTR/RTS line for the 'esptool standard' reset procedure technique. The output IO, plus a 3.3V 500mA regulated output, is available on a socket header, so you can plug wires in for quick programming and debugging. You can use this for everything from an ESP8266 up to the ESP32-P4! Here, we are testing it with a HUZZAH ESP8266 breakout board (https://www.adafruit.com/product/2471), one of our first Espressif chipset products.

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------

#esp32 #adafruit #programmer