June 07, 2018

KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC

1 hour 7 minutes

The Raspberry Pi is an amazing device that can be everything from a server to a game machine, but have you ever wanted to have a self-contained, portable unit? Or maybe a server NUC with a built-in uninterruptible Power Supply?

On this episode of Know How, Patrick and Padre take you through the steps of creating a "LiPi" which can give you up to 12 hours of power for your RasPi while also acting as an auto-switching UPS that can run on 6-26 volts!

Project Summary:

We've done several RasPi projects this year that could bennefit from an independent power source. (The TorPi, the Pi-Hole, The RetroPi) -- We want to create a power system that can act BOTH as a power system AND an uninterruptible power system.

Project Requirements:

Must have a way to power the RasPi WITHOUT using the USB connector

Must have a way to switch from line power to battery power AND BACK without disrupting operation.

Must have a way to turn OFF power completely (to prevent draining the battery pack)

Must operate or more than 3 hours

NUC sized

Should have a way to gracefully power-down the Pi

Must have a way to swap the SD card without dissasembly

LiPi Parts

Raspberry Pi 3 ~$35

5V UBEC (Hobbywing - Accepts 5.5 - 26V) ~$3

3 x 18650 LiPo Cells (3800mAh) ~$8

5.5MM x 2.1mm DC Power Jack ~$1

Rocker Switch ~$12

Momentary Switch ~$5.59

Lithium Ion Battery Charger w/Protection ~$1

JST Connectors ~$0.60

Walkera Connectors (x 3) ~$0.40

Total: ~$51

Power Calculations:

~5 Watt/Hours

Each Cell can provide (3800 x 3.7 = ) ~14 Watt/Hours

We have ~42 Watt/Hours of capacity

But we don't run down all the way... 30% is when the protection circuit will kick in.

So we should count on 29 Watt hours of USABLE power

29 / 5 = Just under 6 hours AT FULL POWER

Shutting down WiFi/Bluetooth and not pegging 100% power should give us close to 8 hours.

The 3D design can be found at the following link:

https://www.tinkercad.com/things/dStBlNXSDlK#/

These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/385

Hosts: Fr. Robert Ballecer, SJ and Patrick Delahanty

Sponsors:

Ring.com/KNOWHOW

eero.com code KNOWHOW

...more

View all episodes

By TWiT

4.5

3535 ratings

June 07, 2018

KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC

1 hour 7 minutes

Project Summary:

Project Requirements:

Must have a way to power the RasPi WITHOUT using the USB connector

Must have a way to switch from line power to battery power AND BACK without disrupting operation.

Must have a way to turn OFF power completely (to prevent draining the battery pack)

Must operate or more than 3 hours

NUC sized

Should have a way to gracefully power-down the Pi

Must have a way to swap the SD card without dissasembly

LiPi Parts

Raspberry Pi 3 ~$35

5V UBEC (Hobbywing - Accepts 5.5 - 26V) ~$3

3 x 18650 LiPo Cells (3800mAh) ~$8

5.5MM x 2.1mm DC Power Jack ~$1

Rocker Switch ~$12

Momentary Switch ~$5.59

Lithium Ion Battery Charger w/Protection ~$1

JST Connectors ~$0.60

Walkera Connectors (x 3) ~$0.40

Total: ~$51

Power Calculations:

~5 Watt/Hours

Each Cell can provide (3800 x 3.7 = ) ~14 Watt/Hours

We have ~42 Watt/Hours of capacity

But we don't run down all the way... 30% is when the protection circuit will kick in.

So we should count on 29 Watt hours of USABLE power

29 / 5 = Just under 6 hours AT FULL POWER

Shutting down WiFi/Bluetooth and not pegging 100% power should give us close to 8 hours.

The 3D design can be found at the following link:

https://www.tinkercad.com/things/dStBlNXSDlK#/

These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/385

Hosts: Fr. Robert Ballecer, SJ and Patrick Delahanty

Sponsors:

Ring.com/KNOWHOW

eero.com code KNOWHOW

...more

Share KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC

Sign up to save your podcasts

KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC

KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC

More shows like Know How... (Audio)

This Week in YouTube (Audio)

Trey's Variety Hour (Video)

This Week in Law (Audio)

This Week in Law (Video)

The Giz Wiz (Audio)

The Giz Wiz (HD Video)

Dr. Kiki's Science Hour (Audio)

Maxwell's House (Audio)

Jumping Monkeys (Audio)

Ham Nation

This Week in Enterprise Tech (Audio)

net@night (Video)

The New Screen Savers (Audio)

Coding 101 (Audio)

Futures in Biotech (Video)

Padre's Corner (Video)

FourCast (Audio)

Ask The Tech Guy (Vintage) (Audio)

Hands-On Photography (Audio)

Ask The Tech Guy (Video)