Mainframe, Performance, Topics Podcast

Mainframe, Performance, Topics Podcast

By Marna WalleTechnology
Download on the App Store

Mainframe, Performance, Topics Podcast episodes

  • Episode 17 "Two Good, Four Better"
    Here are the show notes for Episode 17 "Two Good, Four Better?". The show is called this because our Performance topic is about aspects of whether more LPARs in the same CECs in a sysplex is better or worse.
    Mainframe

    Our "Mainframe" topic discusses the addition of a new parmlib member for RACF, IRRPRMxx.

    • It replaces ICHRDSNT (the RACF Data Set Name Table), and ICHRRNG (the RACF Range Table). These previously could be provided as usermods, maintained as assembler source.
    • If you use both, the load modules for ICHRDSNT and ICHRRNG and the IRRPRMxx parmlib member, the parmlib member takes precedence.
    • IRRPRMxx is found at IPL within IEASYSxx RACF= statements. You can have up to three members. ICHRDSNT replaced by DATASETNAMETABLE statement, and ICHRRNG replaced by RANGETABLE statement in the parmlib member. Complete syntax is found here.
    • You don't need to code the new IRRPRMxx from scratch, you can use a nicely provided REXX exec to convert from memory on what you are currently using, or from a load module on DASD with
    • DSNT2PRM. Be careful, though, as any RVARY commands might change settings won't be reflected. This tool is informal and off the web, and it can be run pre-V2.3 just to see what it produces.
    • Then, when you're ready to use your real IRRPRMxx members, just update your IEASYSxx and IPL.
    • Performance

      Martin talked about whether 2 LPARs (on 2 CECs) or 4 LPARs (on 2 CECs) is better.

      • This is related to some trends, but it's a big subject.
      • There are tradeoffs between 2 vs. 4. Better availability with 4, but would it perform better or worse? It might be better if you get to a state where each LPAR is contained in a single drawer (on z13 or z14). (At least two customers he knows does this.) There is more PR/SM overhead with more LPARs, which was discussed in a 1990 Washington Systems Center Orange book ("PR/SM Performance in LPAR Mode", ZZ05-0453).
      • Also the topic of memory duplication, with more DB2 images. CICS and MQ would similarly have memory considerations too. There might be some scope for consolidation of DB2s.
      • Operational and software considerations need to be thought through. How much harder would it be to manage it, and also keep the software up to date across more images? Of course, much of the thinking would already have been done for 2-way.
      • Topics

        Our podcast "Topics" topic is a follow up and a short discussion on what to do if your wifi isn't performing as you wish.

        • It's been a year since Marna's son built his "gaming" personal computer. She asks him about what has gone well with it, and what he might save for in the future.
        • One thing that has been a problem is the wifi signal in the house. It is not consistently strong, and he would like an ethernet connection directly into the computer.
        • That isn't happening (with a cord down the hallway), so a different solution was found: Powerline Ethernet solution, which plugs into two electric outlets.
        • This was less than $100 and is working well. Other solutions do exist, but this cost effective one has been this gamer's delight.
        • Contacting Us

          You can reach Marna on Twitter as mwalle and by email.

          You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

          31 min
        • Episode 16 "Chapter and Worse"
          Here are the show notes for Episode 16 "Chapter and Worse". The show is called this because our Topics topic is about adding chapter markers (and pictures!) to our published MP3 file. We hope those of you that can see them enjoy them.
          Mainframe

          Our "Mainframe" topic discusses a new z/OS V2.3 function, Coupling Facility Encryption, with Mark Brooks,

          Sysplex Design and Development. Mark talked about this latest capability in Sysplex, which has been
          getting a lot of attention as part of the larger Pervasive Encryption direction.

          Mark explained that CF Encryption means that the customer's data is encrypted by XCF

          in z/OS, sent along the link as encrypted, and stored as encrypted on the Coupling Facility.

          z/OS sysprog needs to set it up by:

          • using new keywords on CFRM policy on a structure by structure basis
          • putting it in your CFRM couple data sets, and the policy change will be pending
          • rebuild the struture (to get it from unencyrpted to encrypted)
          • DISPLAY XCF structure commands can be used to see what the policy
          • has, what the structure currently is, and the form of encryption used.

            List and Cache structures contain customer sensitive data, the XCF control

            information will not be encrypted because it is not sensitive customer data. Lock
            structures don't contain sensitive customer data, and are not encryptable.

            Tooling:

            • zBNA looks at new SMF data, so that you can see the amount of data transferred to the CF. From there, you could judge the cost of doing the encryption.
            • SMF 74 Subtype 4 records contain the new information on the amount of data, via measurement APAR OA51879 on z/OS
            • V2.2. Planning can begin on z/OS V2.2 with this APAR.

              For more information, see the z/OS Setting Up a Sysplex.

              Performance

              Martin talked about MSU-related CPU fields for doing software pricing analysis. Some of these fields are used by SCRT in support of the new Mobile function. Most notably the fields cover:

              • Mobile Workload Pricing (MOBILE), using a new WLM mechanism, .
              • CATEGORYA and CATEGORYB: These are just placeholders for any future additional pricing options that come about.
              • Container Pricing is another pricing model, ....., and maybe another topic on that later.

                The overall idea: Be aware of the new fields that you will be analysing. These fields are available at two levels:

                • At the System level, as Rolling 4 Hour Average numbers - in SMF 70 Subtype 1.
                • At the Service Class Period level, as interval-based numbers - in SMF 72 Subtype 3.
                • Topics

                  Our podcast "Topics" topic is about adding chapter markers to the MP3 file for podcast apps. This

                  makes it nice to skip from one section to another easily. Our podcast has five
                  sections, each with its own graphic and chapter.

                  Contacting Us

                  You can reach Marna on Twitter as mwalle and by email.

                  You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                  42 min
                • Episode 15 "Waits and Measures"

                  Here are the show notes for Episode 15 "Waits and Measures". The show is called this because our Performance topic is about LPAR weights, and because this episode was after a seasonal hiatus.

                  Mainframe

                  Our "Mainframe" topic discusses a small new function in z/OS UNIX V2.3: automatic unmount of the version "root" file system in a shared file system environment. Our guest was Barry Lichtenstein, the developer of the function, and he told us all about it:

                  • there is a new BPXPRMxx VERSION statement parameter, UNMOUNT. This means that when no one is using that "version filesystem", it will be automatically unmounted. This is not the default. Syntax here
                  • this function is nice, as it will allow an unused version file system to be "rolled off" when you don't need it anymore. Unused here, means that no system is using it or using any file system mounted under it. z/OS UNIX will do this detection automatically, and unmount not just the version file system, but mounted file systems under it that are no longer used by any systems after an unspecified amount of time.
                  • you can turn this on and off dynamically with a SET OMVS or SETOMVS command. There is DISPLAY command support of it. And perhaps the best news, the health check USS_PARMLIB will see if the current settings don't match the used parmlib specification. 
                  • we weren't sure if SMF record 92 would be cut when the unmount happened, but Barry said nothing unique was happening for this function so what happens today is most likely the same behavior. There are messages that are issued in the hardcopy log when the unmounts happen. SMF 90 might be issued for SET changes.
                  • Performance

                    Martin talked about Weights and Online Engines in LPARs, and Martin again looking at customer information.

                    • Intelligent Resource Director (IRD) changed PR/SM worked:
                      1. Dynamic weight adjustment
                      2. Online logical engine management (vary online and offline). Shows minimum and maximum weights when changed by IRD.
                      3. HiperDispatch: took away logical engine management (and manages it better!), and kept IRD dynamic weight adjustment. With HiperDispatch's parking of engines, no work is directed towards it. 
                      4. More instrumentation was introduced, such as Parked Time and refined instrumentation on weights (vertical weights, by engine).
                      5. Customer situation was that they did their own version of IRD and HiperDispatch: Varying logical engines online and varying weights (not using IRD itself). Martin expected IRD to change weights, but he saw the IRD weight fields were all zero. 
                      6. Why not let IRD do it? Martin thinks there was something in the customer's mind to control it themselves.
                      7. Why not use HiperDispatch? Martin thinks that maybe a subtle difference might be needed, but LPARs should be designed properly. 
                      8. Topics

                        Our podcast "Topics" topic was "Video Killed the Radio Star?" and about screencasting.  Martin has been trying to post screencasts to YouTube. Here's one.

                        Contacting Us

                        You can reach Marna on Twitter as mwalle and by email.

                        You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                        42 min
                      9. Episode 14 "In the Long Run"

                        Here are the show notes for Episode 14 "In the Long Run". The show is called this because the episode ran much longer than usual, and it is of fitting length if you have a very long commute.

                        Mainframe

                        Our "Mainframe" topic is the first in a series of deep dives into z/OS V2.3. Part 1 is on z/OSMF Autostart.

                        This is the most important migration action in z/OS V2.3, and requires special consideration by every customer IPLing z/OS V2.3. Things that you'll need to consider are:

                        • Whether to start z/OSMF or not. (Starting is the default). You control this via IZUPRMxx parmlib members (which in new news can be shared via PI82068).
                        • If you don't start z/OSMF and have its functions available to system(s), then you not be able to use certain functions (notably in z/OS V2.3: JES2 Notification).
                        • If you don't want to start z/OSMF on a certain system, you can connect to another z/OSMF system in the same sysplex, and that requires specification on which group that would be.
                        • The number of z/OSMF servers in a sysplex hasn't changed, still as it was before V2.3.
                        • z/OSMF server starting on an LPAR with good zIIP capacity, and memory (minimum of 4GB) is a starting consideration.
                        • Strong recommendation: start z/OSMF now on your V2.1 or V2.2 system so that there are fewer work items to do (a couple of security profiles, new procs, parmlib updates only).
                        • Performance

                          In our "Performance" topic Martin talked about two Parallel Sysplex items that he's been pondering extensively recently. He's been using RMF data (taken from SMF type 74 subtype 2 and 4).

                          Coupling Facility

                          This is the subject of a blog post: Some Parallel Sysplex Questions, Part 1 - Coupling Facility

                          • Resources: CPU, memory, and path
                          • Structures: their role to applications, and how responsiveness responds to work load is interesting
                          • XCF Signalling

                            This is the subject of another blog post: Some Parallel Sysplex Questions, Part 2 - XCF

                            • Resources: Paths, buffers, and transport groups
                            • Groups: again, knowing the application types, with the theme of managing traffic down when possible
                            • Topics

                              Our "Topics" topic is subtitled "Podcast meets Podcast" with the newest mainframe podcast we know: Terminal Talk.

                              Frank De Gilio and Jeff Bisti are the hosts, and concentrate on a wider introductory perspective than our MPT podcast does.

                              • Terminal Talk (TT) has enviable technology for recording, and came about from Frank and Jeff taking long car rides to Pennsylvania.
                              • Planning for the TT podcast consists mostly on engaging guests, and not necessarily following an outline.
                              • Length is a big consideration: TT is intended to be of a work-commute length.
                              • Editing is done with Audacity, just like our MPT podcast. TT records mono. MPT does stereo. Martin uses the Audacity waveform visualisation when editing; Hence the terms "um fish" and "so so birds". :-)
                              • We had great fun talking to Frank and Jeff; Martin left some of the laughs in the final edit.

                                Contacting Us

                                You can reach Marna on Twitter as mwalle and by email.

                                You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                                59 min
                              • Episode 13 "We'll Always Have Paris"

                                Here are the show notes for Episode 13 "We'll Always Have Paris". The show is called this because both Marna and Martin reminisce about lovely times in the City of Light.  Marna just got back from Paris with her son (the one that built his own gaming computer). They discuss what they like to do there.

                                Mainframe

                                Our "Mainframe" topic discusses what has been a popular item since more people have finished migrating to z/OS V2.2: GDGEs. Generation Data Group Extended (GDGEs) were introduced in z/OS V2.2, and should only be used after fully migrated to that release everywhere. "Old" GDGs allow >255 generations. GDGEs allow up to 999, but with a very different internal structure. GDGEs are externally usable transparently.

                                There is no straightforward conversion way in DFSMS. Steve Branch (alias name of "Mr. Catalog") and Marna had a six step JCL job to convert (which used IDCAMS ALTERs), and would work if the generations were SMS-managed, which was the initial use case. Several options were discussed.

                                • You can do the conversions for your GDGs to GDGEs, but you need to decide if it's worth it.
                                • The TSO/e RENAME will work in all the cases that IDCAMS ALTER would, plus more.
                                • The shared REXX exec can be used if you want to convert NON_SMS/TAPE GDGs to GDGEs.
                                • Still, if you have a gazillion references in places like JCL, it is a compelling case to take some extra one-time work and do the conversion.Mind the recalls! You'll need a lot of recall space on DASD, if you are recalling lots of data sets and they are large.
                                • Performance

                                  Martin talked about a presentation he's been keeping updated, Even More Fun With DDF. The original presentation covered: 

                                  • why you should care about DDF,
                                  • LPAR to Service Class Level views,
                                  • side themes of zIIP and DB2 address spaces, and a discussion of SMF 101 and DDF.
                                  • Contains three different customer cases: some basic statistics, a CPU Spike case, and "sloshing".
                                  • SMF 30 Enclave Statistics graphing
                                  • Thoughts on handling clients with huge numbers of short commits
                                  • Matching client and server DB2 101s where DB2 to DB2 DDF
                                  • Production vs Feral DDF
                                  • Diagrams of machines connecting to DB2 via DDF
                                  • The updated presentation has an analysis is done using RMF and SMF 30, and SMF 101 DB2 Accounting Trace, using special code written by Martin.

                                    Topics
                                    • Sites: Martin loves to go to the museums. Especially the Louvre and Beaubourg. Marna's son doesn't like museums, so they visit other spots like the Catacombs (with a four hour wait!) and the gargoyles at Notre Dame./li>
                                    • Food: Marna and her son focus on cheese, and have become quite adept at all three raclette contraptions available, all ways to scrap cheese onto your plate.
                                    • Getting around: Martin loves the metro, which is so easy and convenient. He loves the part on the metro when you come out from underground to the raised tracks in some places. Marna did a lot of walking. (Fitbit while at Versailles registered 31k steps = 13. miles = 22 km.)
                                    • Pro Tips: Use the "skip the line" and make reservations very early. Buy tickets early.
                                    • Contacting Us

                                      You can reach Marna on Twitter as mwalle and by email.

                                      You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                                      39 min
                                    • Episode 12 "Baker's Dozen"

                                      Here are the show notes for Episode 12 "Baker's Dozen". The show is called "Baker's Dozen" because it is the thirteenth episode, after starting at Episode #0.

                                      Mainframe

                                      Our "Mainframe" topic discussed some fun small enhancements Marna has enjoyed from GRS.

                                      1. With OA42221 back to z/OS R13, GRS has the ability to write SMF records (87 subtype 1) to identify heavy users of global generic queue scans. This is what Marna calls a new "monitoring capability". These issuers might be the cause of increased CPU and GRS private storage. Turn on with GRSCNFxx MONITOR(YES)
                                        • Existing monitoring of ENQ/DEQs at this point, are not written into SMF records. And the only filtering capability at this point is the old "ISGAUDIT" method. "ISGAUDIT" is a where you prepare you filter, assemble and link edit it into load module and then manipulate it with many MODIFY commands. Not very simple for everyone to do.
                                        • With z/OS V2.2, there are two excellent new functions building on OA42221:
                                          1. SMF 87 subtype 2 records can be written for ENQ/DEQs, and
                                          2. a new filtering capability available with parmlib member GRSMONxx. There is no IEASYSxx for GRSMONxx, so you must start it with SETGRS GRSMON=xx. Only one GRSMONxx is allowed per system.
                                          3. Now, you can get all your "monitoring" into SMF records for both ENQ/DEQs and global generic queue scans. And you don't need to use the cumbersome ISGAUDIT anymore.

                                            Performance

                                            Martin talked about coupling facility structure performance, especially as it concerns DB2 lock and cache structures. Having a lot of structures isn't a problem, as long as you are looking at how "busy" the coupling facility is - both CPU- and memory-wise. Sorting in descending order the structures by a metric you want is an important and easy way to figure out which structures to pay attention to.

                                            Balance this with the number of DB2 structures to manage - perhaps hundreds! Some advice was given as to what were the most important metrics to concentrate on.

                                            Looking at "false contentions" and "XES contention" for lock structures is important, and may indicate that these structures need to be larger. Especially if the number of false contentions is high, relative to the lock structure requests. For cache structures, there are different metrics. You may have gotten a large number of structures because you are using DB2 data sharing. Look at names and types for a clue as to where they came from.

                                            Topics

                                            Our podcast "Topics" topic is how the audio for this podcast gets produced. If you are interested in audio editing, here are some items that recording this podcast has uncovered:

                                            • For recording: Equipment: Headphones and microphones are necessary. Recording programs: We use Skype with plugins to record.
                                            • For editing process: Record in chunks, for each podcast section.Audacity is used for the actual editing. Martin places each speaker on a different side (right or left). Audacity makes this very easy.
                                            • Clean up removes noise, ensures flow, and sound effects are added. Audacity has some nice filters for noise removal, though this isn't 100% perfect.
                                            • Contacting Us

                                              You can reach Marna on Twitter as mwalle and by email.

                                              You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                                              32 min
                                            • Episode 11 "XI-Ting"

                                              Here are the show notes for Episode 11 "XI-Ting". The show is called "XI-Ting" because, well, it is episode #11 and we had one shot at the Roman numeral to use and took it. 

                                              Mainframe

                                              Our "Mainframe" topic was Marna's experience in trying out the z/OSMF Workflow Editor. The z/OSMF Workflow Editor is a new function in z/OSMF to create your own Workflow, or change an existing Workflow. The Workflow Editor is available on z/OSMF V2.1 in PTF UI43814 and on z/OSMF V2.2 in PTF UI42847.

                                              • "Folders" for information you need to provide: Metadata, Variables, Steps, ...
                                              • You will always have a correctly produced Workflow definition file. Much easier than the old way (Marna used Notepad++ and kept interating).
                                              • Your first Workflow will probably use a "template" (file like JCL, script, or exec in a step) that you want to drive. You will probably have "variables" (customized values in that template) that you want the Workflow user to specify. Always make sure you associate your variables with the steps! Otherwise they won't coordinate together.
                                              • The open source Apache Velocity Engine is used for variable substitution and conditional directives.
                                              • There is a very small checkbox for resolving variable substitution in the Workflow Editor. Don't forget to check it if you are using variables!
                                              • Remember to remove the first "dummy" step when creating a Workflow from scratch. You don't need it.
                                              • Performance

                                                Martin had a special guest for a conversation on zHyperLinks, Anna Shugol, IBM Mainframe Technical Specialist. Martin and Anna talked about a Statement of Direction that was released at the beginning of 2017. 

                                                This topic is very important because it is an innovative new IBM I/O and Storage technology to improve performance for DB2-centric applications. This is designed to provide dramatic improvements in I/O latency, and change the I/O paradigm. It complements existing technology, such as Hiper Performance FICON and using large DB2 buffer pools. zHyperlinks is intended to provide short distance (150 meters between the CEC and the storage unit) point-to-point improvements, which are expected to support 8GBs (gigabytes per second) with new protocols.

                                                • Today, there is I/O to the Coupling Facility, and FICON to disk and tape and times associated with those. zHyperlinks is planned to support improvements in the connect and pend times, with Sync I/O wait times being the dominant DB2 components helped with zHyperlinks.
                                                • The IBM Storage device required for this solution will be a minimum of DS8880, with up to 16 zHyperLinks being able to be connected.
                                                • The minimum z/OS and DB2 levels will be provided later.
                                                • Topics

                                                  Our podcast "Topics" topic has been sub-titled "Some Assembly Required" ; Not the HLASM that mainframers might think that relates to, but actually something in the same vein. Marna's 14-yr old son who is interested in hardware has just built his first personal computer. Marna and Martin talk about how that first computer has a lot in common with a mainframe.

                                                  Contacting Us

                                                  You can reach Marna on Twitter as mwalle and by email.

                                                  You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                                                  35 min
                                                • Episode 10 "234U"

                                                  Here are the show notes for Episode 10 "234U". The show is called "234U" because:

                                                  • We are very happy that we can talk about z/OS V2.3 now that it's been previewed on February 21, 2017.
                                                  • We liked the consecutiveness 2-3-4, and U added works nicely.
                                                  • Mainframe

                                                    Our "Mainframe" topic was a highlight of some of the newly previewed z/OS V2.3 enhancements! We will surely talk a lot about z/OS V2.3 in podcasts to come.

                                                    First, it is important to know that z/OS V2.3 will only IPL on an zEC12, zBC12 and higher. Prepare now if you need to.

                                                    Here's a brief list of the items planned for V2.3 (which is planned to GA on September 29, 2017)

                                                    • System logger's log stream staging datasets can be allocated greater than 4 gigabytes.
                                                    • Data set encryption for z/OS data sets and zFS file systems (policy-enabled), and CF structures (list and cache, with the CFRM policy).
                                                    • zFS:
                                                    • zEDC compression on individual files, and existing and new zFS files systems. Existing zFS while in use!
                                                    • Salvage utility to run online with file system is still mounted
                                                    • Dynamic changes to aggregrate attributes for common MOUNT options, and dynamic changes to sysplex sharing status.
                                                    • New facility (from TSO or UNIX shell) to allow for migration from HFS to zFS, without requiring the "from" file system to be unmounted.
                                                    • email: ability to have an email address in the RACF user profile. JES2 and z/OSMF could use email notification to the user.
                                                    • JES2 JCL, the delimiter keyword (DLM) on SYSIN is extended from 2 to 18 characters long.
                                                    • SCRT is a component delivered in z/OS, with support for enabling ISVs to generate an ISV-unique SCRT report.
                                                    • Auto-starting z/OSMF be default, late in the IPL hopefully after OMVS and TCP/IP are up. The biggest migration action in z/OS V2.3 identified yet.
                                                    • TSO/E support for 8 character userids. Many products require changes to support this, so do planning for this one.

                                                    • Performance

                                                      Martin had an esteemed guest for our "Performance" topic, Elpida Tzortzatos, Distinquished Engineer from z/OS Development.

                                                      Martin and Elpida chatted about several important recent advances made in the area of z/OS memory management.

                                                      • Review of UIC (Unreferenced Interval Count), which is how long in seconds

                                                      • a page has remained unreferenced. High count is low contention, low count is high contention. Since moving to large memory (64-bit, zArch), the design changed to reduce the review frequency from 1 sec to 10 seconds.

                                                        When more memory support was added (128G to 4TB) it was again reduced to not do any UIC updates, other metrics are used to judge contention instead.

                                                        • RMF reports high impact, medium impact, and low impact frames evicted today, for a performance judgement.

                                                        Customers should be looking at average available memory, and minimum too. Make sure your AFQ can handle workload spikes and SVC dumps. Here is a WSC paper about that.

                                                      • Large frames (1MB and 2GB page sizes): the Dynamic Address Translation (DAT) is on the critical performance path

                                                      • Use the LFAREA specification for 1MB and 2GB frame usage.

                                                        Contacting Us

                                                        You can reach Marna on Twitter as mwalle and by email.

                                                        You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                                                        54 min
                                                      • Episode 9 "Back in Black"

                                                        Here are the show notes for Episode 9 "Back in Black". The show is called "Back in Black" because:

                                                        • We've been away for a long time, traveling for Martin and on vacation for Marna.
                                                        • A vague reference to a BBC tv show about British fantasy author, Terry Pratchett
                                                        • Continuous Delivery Follow-up Announcements

                                                          • January 10, 2017 IBM CICS Transaction Server for z/OS, V5.3 is further enhanced with the continuous delivery model and the IBM CICS Transaction Server for z/OS, V5.4 open beta offering is updated
                                                          • January 19, 2017 IBM Customer Insight for Banking V2.0, IBM Client Insight for Wealth Management V2.0, and IBM Incentive Compensation Management V10.0 follow the IBM Continuous Delivery Lifecycle Policy.
                                                          • Mainframe

                                                            Our "Mainframe" topic was an interview with John Eells, z/OS System Test and lead on the Software Installation Strategy.

                                                            This topic is very important for z/OS system programmers to understand. IBM and ISVs have been working on a common install method, that handles both SMP/E and non-SMP/E. This would go beyond laying down code, and would eventually hook seamlessly into doing configuration tasks (via z/OSMF Workflow). It would even be able to package software, if you wanted to, and all delivered within the base z/OS operating system.

                                                            The common install method would be provided through z/OSMF's Software Management plug-in, so make sure you are setting up and becoming familiar with z/OSMF now. John and Marna also talked about some of the wishlist items we'd like to see in this solution.

                                                            Performance

                                                            Our "Performance" topic was about some about additions and changes to Martin's Parallel Sysplex Performance presentation that he's been presenting over the years. Somehow this presentation never seems to get any shorter.

                                                            This presentation has several sections: Structure-Level CPU, Matching CF and PR/SM views of CPU, Structure Duplexing, XCF traffic, CF link information, and CF Thin Interrupts.

                                                            The new parts and changes he has made in this presentation are:

                                                            • Asynchronous Duplexing for lock structures. You can also find a good Mainframe Insights article about this by David Surman here.
                                                            • XCF traffic and Data Sharing Group topology
                                                            • and

                                                              • CF Thin Interrupts and CPU.
                                                              • Topics

                                                                Ahoy! In our "Topics" section we discuss voice-activated assistants that have been hitting the market for a while now.

                                                                Martin has a good amount of experience in Siri from Apple and Alexa (Amazon) Echo and Dot. A third one is Google Home.

                                                                Martin talks about the various pros and cons on each.

                                                                Contacting Us

                                                                You can reach Marna on Twitter as mwalle and by email.

                                                                You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                                                                37 min
                                                              • Episode 8 "Queue Me Up"

                                                                Here are the show notes for Episode 8 "Queue Me Up". The show is called "Queue Me Up" because:

                                                                • Marna talks about moving up to higher z/OS releases...or releases "in the queue".
                                                                • Martin talks about the Coupling Facility list structures...or "queues".
                                                                • We had some follow up:

                                                                  • IBM Doc Buddy - available for iOS and Android.
                                                                  • The latest iOS level is currently 1.1.1. The latest Android level is currently 1.1.2. Still keep an eye out for updates, as they are coming out periodically and delivering requested functions.
                                                                  • Continuous Delivery Follow-up
                                                                  • October 4, 2016: A DB2 12 recent announcement includes their Continuous Delivery message, with new functions via the service stream: IBM DB2 12 for z/OS expands the value offered to your business by IBM's industry-leading mainframe data server
                                                                  • Mainframe

                                                                    Our "Mainframe" topic was a discussion on z/OS upgrade timing considerations.

                                                                    z/OS R13 is now out of service since end of September 2016, five years of regular service support since GA. There are three consecutive releases of coexistence (with releases planned on coming out every two years).

                                                                    This "discrepancy" between five years of service and and six years (three times two) of coexistence has been quite interesting and deserves some thought. Marna talks about some considerations, and it might be that the "n-2" model should be reconsidered to be a "n-1" model for some customers.

                                                                    Performance

                                                                    Our "Performance" topic was an extension of this blog post of Martin's: Right On Queue.

                                                                    Martin talks about Coupling Facility list structures, and how they are different from lock and cache structures. He also covers some considerations and causes for how they might get filled up. (Think of the analogy of a pipe getting blocked as one case.)

                                                                    Sizing is important and he uses SMF 74-4 and RMF Monitor III. A good rule of thumb is that your structure's maximum size should be in the range of 50% to 100% of the current size. More than double puts you at risk of having a list structure full of control blocks and little data. You also need to monitor how much of the current size is actually in use.

                                                                    Topics

                                                                    In our "Topics" section we discussed a travel app called Waze. It's a crowd-sourcing app you can use to get real-time travel estimates and routes. It also alerts you about such items as accidents, debris, police cars, etc, which other users have reported. This app is particularly useful even if you have to put up with a very small amount of advertising.

                                                                    Contacting Us

                                                                    You can reach Marna on Twitter as mwalle and by email.

                                                                    You can reach Martin on Twitter as martinpacker and by email and blogs at blog.

                                                                    33 min

                                                                  About Mainframe, Performance, Topics Podcast

                                                                  From the publisher's feed

                                                                  Martin Packer (Principal z Systems Investigator) and Marna Walle (z/OS Development) are two IBMers talking about whatever z/OS topics come to mind.  Often guest experts weigh in on current…