Build a 3D printed Menorah that lights up with NeoPixel LEDs and CircuitPython. A push button allows you to light up a NeoPixel LED on each night of Hanukkah.

Learn Guide: https://learn.adafruit.com/neopixel-menorah/

This minimalistic design features parts that snap fit together and print without any supports. The assembly is modular and easy to put together.

The bulbs are 3d printed in translucent PLA and the NeoPixels are fitted inside the candle holders.

Code on GitHub

https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/NeoPixel_Menorah/code.py

Parts

QT Py RP2040

https://www.adafruit.com/product/4900

NeoPixel Button PCB

https://www.adafruit.com/product/4356

16mm Push Button

https://www.adafruit.com/product/1503

3-pin Cables

https://www.adafruit.com/product/4721

2-pin Cables

https://www.adafruit.com/product/4720

M2.5 Hardware Kit

https://www.adafruit.com/product/3299

USB-C Cable

https://www.adafruit.com/product/4696

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------