Questions:

Hello! I have an Artillery Sidewinder X2 and would like to install Klipper on it to see if I can print faster. Since Klipper requires a Raspberry Pi, and it seems that they are too expensive, what are my options? There are so many different things to choose from and not sure which offers the best bang for the buck. 

Steven 

Hi Fellas, I am having a real problem with stringing. Whenever I print, I get these fine hairs all over the place. I did try changing the retraction settings in Cura, but it doesn't matter if I set it as high as 6 or as low as 1. I am printing mostly PLA on an Ender 5 Pro. Thanks for the great podcast!

Justin

We are here to answer and discuss your questions! Please go to our submit page at perfectfirstlayer.com and ask us anything 3D Printer related!

Here are the questions from our listeners this episode:

Hey guys. Just found your podcast and binged the first episodes and really enjoyed them! I do have a question for you. I am having an awful time with supports. I cringe every time I need to use them. I have a Biqu B1 printer and use Cura to slice with. No matter what I do, in the settings, they are hard to remove and end up leaving a lot of marks behind. Any tips you can give me? Thanks again for the great podcast, Jeremy from Oklahoma.

I have a question for you. I recently purchased an Elegoo Neptune 3 PLus and am really loving using it and 3d printing! I have tried  a couple large prints on it and am having issues with the models sticking to the bed while printing. It always seems to happen when the print is almost through a 20 hour + print and it gets ruined. I am using Matterhackers PLA and using the recommended settings for both the hot end and the heated bed. What am I missing? Steven.

First we tackle a question from Xavier in LA:

I really want to speed up my printing. I have an ender 3 v2 and it's still a stock printer. What are some good upgrades for me? What are the problems that can arise with the equipment as I speed things up? Do I need to replace the stock hot end and control board? I know, a lot of questions. I think that it would be cool if you guys could discuss this and help a newbie out.

This leads to a really good discussion of all the things to help increase your print speed. And JJ is getting a Bambu P1P! Nathan also recieved his, so he gives us some insight on the P1P.

The guys answer a question from Jim in St. Loius:

"I keep hearing about how great Klipper is. Unfortunately it seems when I try to learn about it, I am met with a long and complicated installation. And the Klipper website is even worse. Can you recommend a site or actually explain the process of installation? And do I really need it? I have an Ender 3 V2 and would like to delve more into the hobby, but it just seems like everyone over complicates the process."

Which of course leads to a side discussion of Bambu Lab printer, Marlin and Prusa

The guys discuss where they like to download ready made files, and then have a lengthy discussion abouot the different 3D modeling softwares that are available.

The guys discuss the state of 3D printers and the directions the manufacturers are taking regarding updates to the technology. Is it about innovation or just price?

Guy, Nathan and JJ discuss the wonderful world of slicers. The most relevent settings, how to "tune" them for your printer or filament and all kinds of very cool things.

The guys talk about what's best to upograde on a new printer, and what's best to just leave alone

In our very first episode, Guy, JJ and Nathan give a little background on themselves.