Property Done Properly

Property Done Properly

Download on the App Store

Property Done Properly episodes

  • BIM 6D – Sustainability And Energy

    In this episode further examining the various ‘dimensions’ of Building Information Modelling (BIM), Ian takes a look at the sixth area of data collation, Sustainability and Energy. Ian will present an introduction to 6D, the definition of sustainability, the remit and function of the 6D module, the aim of 6D modelling, the benefits of 6D modelling, energy modelling, and available software.   

    KEY TAKEAWAYS

    • The 6D level enables Sustainability Engineers to model all aspects of the design concerning the sustainability of the proposed building or project. 
    • The definition of Sustainability is the development that meets the needs of the present without compromising the ability of future generations to meet their own needs. 
    • 6D encompasses reducing future energy use, looking at machinery and equipment and their impact, and the structure and thermal loss of the building itself. 
    • The 6D software allows you to look at all the integrated data to fully comprehend future energy usage to operate and heat the building.  
    • With the 6D model, fast and accurate decision-making processes are available from a very early point in the design, the communication flow is improved, rapid evaluation of proposed solutions is made possible, the environmental impact of the project can be lessened, and the efficiency of operation can be increased after delivery. 
    • Energy modelling is possible with different kinds of energy usage be they solar, wind or ground source heat pumps or air source heat pumps. 

    BEST MOMENTS

    ‘The concept of sustainability can be split into Environmental Sustainability, i.e the ability to enhance the environment and Economic Sustainability, the ability to generate income and employment, and then finally Social Sustainability, the ability to generate human well-being.’   

    ‘It gives us overall better management of the building and the structure after handover. So we’ve got all the base data, so therefore when we monitor through the building management systems we should be able to match reality against the projected view of what we think it should be running at.’

    ‘Sustainability is multi-faceted and concerns the achievement of a sustainable balance between economic, environmental, and social requirements.’

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

     https://www.ianjrogers.com/

    Hosted on Acast. See acast.com/privacy for more information.

    17 min
  • Christmas Message 🎄

    Merry Christmas and A Happy New Year from Ian Rogers at Property Done Properly! Thanks for listening to the podcast for the last year and there is much to look forward to in the New Year! 

    KEY TAKEAWAYS

    • Look forward to MORE interviews to give a wide range of different perspectives on the subject.
    • MORE fascinating in-depth insights into the world of construction projects. 
    • A new Vlog with even more information involving two new ongoing projects.  

    BEST MOMENTS

    ‘I am embarking on a couple of my own projects so I am now going to be practising what I preach in these podcasts. One is a refurbishment of my own house in the UK and one is a very substantial project on a Caribbean island.’ 

    ‘Thank you again for being with me on this journey over the last year. I’ve really enjoyed it.’  

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

    https://www.ianjrogers.com/

    Hosted on Acast. See acast.com/privacy for more information.

    4 min
  • BIM 5D – Cost Estimation

    In this episode, the fifth of the series detailing Building Information Modelling (BIM), Ian takes a look at the fifth area of data collated or the ‘5th Dimension’ of BIM. Ian explains how all the other dimensions are utilised to create the 5th, the project cost estimations and its processes, modelling, software, benefits and challenges. 

    KEY TAKEAWAYS

    • 5D is about real-time cost scheduling with in-process notifications about changes in cost. 
    • It minimises overspend due to cost reporting and budgeting and informs all areas of the project teams of cost implications and changes.
    • Data gathering should be implemented at the very beginning and exhaustive information storage will increase the efficiency of budgeting and cash flow crisis data later on.
    • Every single object or asset within the 3D model is cost estimated at the 5D level and is accessible in all the necessary forms from full project cost to individual items and areas. 

    BEST MOMENTS

    ‘As per 4D scheduling, you’re integrating your cost data into the model. You can have a library of cost data so you can run from an early stage what you think the project’s going to cost.’

    ‘By automating the quantification of the building elements with unit price, quantity surveyors or cost engineers can input information into the 3D model so they’ve got a fully interactive process.’

    ‘If you want to go down the whole online bidding process you can do it online off the basis of this system.’

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

    https://www.ianjrogers.com/

    Hosted on Acast. See acast.com/privacy for more information.

    14 min
  • BIM 4D Scheduling

    In this fourth episode looking at Building Information Modelling (BIM), Iain looks at the 4th dimension of the model, Scheduling. This area of data covers everything involving the construction programme or sequence of construction. It allows a very detailed view of an event timeline to identify any conflicts or work blocks. 

    KEY TAKEAWAYS

    • It allows for seamless coordination between Architects, Contractors and on-site teams.  
    • If a construction or supply issue occurs, for instance, that can be programmed into the model to provide an immediate overview of what scheduling conflicts that delay will cause. 
    • The BIM approach allows for all areas of construction to be seen as a whole and allows for full collaboration between teams. 
    • Accuracy of data is paramount to allow for clear viewing of clash detections.

    BEST MOMENTS

    ‘You can run simulations. You can get a real detailed view of the installation process. You can link it through to the 3D model and run 3D simulations of the building being built.’ 

    ‘On big projects I’ve seen these time charts going to thousands of line items.’

    ‘4D scheduling as part of BIM is a very common activity now. I know a lot of people and a lot of practices that do this and I know a lot of people doing this very successfully. This is the most common integration of the whole BIM process and all the different dimensions.’ 

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

    https://www.ianjrogers.com/

    Hosted on Acast. See acast.com/privacy for more information.

    12 min
  • BIM 3D – Three-Dimensional Model – The Geometry

    In his third episode on Building Information Modelling (BIM), the system used to collect all data centrally in one place regarding the whole life cycle of a project, Ian is going to cover the next dimension in BIM, 3D. He will explain what 3D modelling is about, its benefits, how to begin a 3D model, what software is required, BIM coordination and the challenges involved.   

    KEY TAKEAWAYS

    • Enhanced 3D project visualisation and comprehensive integration and collaboration achieved between all the parties involved via a 3D model.  
    • All data is stored commonly on a common platform. 
    • Initial setting up is key to the accuracy of cohesive data in the ongoing BIM.
    • Via this 3D visualisation and integration with all aspects of the project, problems can be recognised and circumvented easily.
    • Most collaborators within the project will have different varieties of software to visualise the 3D model. Integration is important when choosing software and all integration should be approached carefully.  
    • Accuracy, specialist expertise and scope are important in the early stages of creation.  

    BEST MOMENTS
    ‘You will be working on an integrated platform. So that will really streamline and improve communications.’
    ‘You can even use this, in my view, for all the data management of the whole project. So all the documentation, all the contracts, everything else should be able to go on to the common data environment.’
    ‘Each program has its own unique set of features and capabilities. Each program has capabilities of scaling or not. Some of the smaller packages really are only capable of being used on smaller projects.’ 
    ‘You need to have a solid common data environment in terms of what is going on.’

    VALUABLE RESOURCES
    https://www.ianjrogers.com/

    ABOUT THE HOST
    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD
    https://www.ianjrogers.com/

    Hosted on Acast. See acast.com/privacy for more information.

    23 min
  • BIM 2D Basic Flat Plan

    In this, the second part of Ian’s series on Building Information Modelling (BIM) and its various areas of data, referred to as ‘dimensions’, he will focus on the 1st and 2nd Dimensions which are pertaining to the Basic Flat Plan. BIM is the process of managing and generating building data during its complete life cycle to allow full project collaboration and integration.

    KEY TAKEAWAYS

    • 1D is process of governance, including laws, contracts, mandatory use of BIM that controls the whole BIM process.
    • 2D is the flat plan in the earliest form of any construction models expressed on a simple XY axis.
    • There is no integration between disciplines because each one has its own set of drawings. There is no easy visualisation so it is difficult for people to preview the project.

    BEST MOMENTS        

    ‘It (BIM) is an integrated workflow that enables architects and engineers and builders to explore a project digitally before it is built.’

    ‘1D is the essence of what BIM is about, how it works, what your particular modalities are, how you’re going to use it. In some instances like in the UK government and the US government it is now mandatory.’

    ‘I remember the story that the engineers head this piece of pipe and it appeared at the beginning of their set of drawings so they didn’t know what it was about so they just drew it through their section of the development. They found that it had been drawn on a piece of paper and had no purpose.’

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

     https://www.ianjrogers.com/

    Hosted on Acast. See acast.com/privacy for more information.

    10 min
  • Implementing BIM And Data Management

    In this first episode on Building Information Modelling (BIM), Ian will demonstrate the tremendous potential of BIM even on small projects. BIM is a process of generating and managing building data during its complete life cycle, from conceptual design through operation of the building and on to its eventual end. It is a centralisation of data allowing much closer collaboration between the various different areas of the construction process and provides comprehensive information gathering from one accessible source.
    Ian will look at the impacts and benefits of BIM, the process, collaboration, and the intrinsic function of life cycle and BIM. 

    KEY TAKEAWAYS

    • BIM is a sophisticated 3D model that  enables you to look at all aspects of the design and enable people to collaborate via one platform.
    • The key aspect of BIM operation is information management. The Common Data Environment (CDE) is where all the data is kept and may require many programs and software to enable the input, access and normalisation of the data.
    • A 3D model is stored within BIM and is incorporated with 4D scheduling, to generate schedules of construction, 5D cost estimation, 6D sustainability and energy, and 7D facilities management.
    • The adoption of BIM in the organisation involves persuading the stakeholders and team members of the substantial advantages it offered. The initial setup will be complex so it is important to have everybody agreeing on implementation.
    • It is advisable to create a structured BIM implementation plan. This document will enable everyone's role to be defined and the goals and requirements to be established. 
    • Research, test, trial and understand the available software before you commit to a final BIM implementation package. For smaller projects fully integrated BIM software is available and can be much more cost effective.
    • Monitor, evaluate, adjust and repeat. Once your BIM is in place you should be consistently improving your processes to streamlined and accurate usage.  

    BEST MOMENTS
    ‘As a result of that (collaboration) you have greater ability to sort out clashes and issues and not miss things, so that when the design eventually gets on site, it is much more robust and unlikely to have variations and issues.’
    ‘Some of the 5D cost estimation models actually do have tender modules built in so it can produce all your tender documentation.’
    ‘There are rumoured future dimensions coming. The one that’s often bandied around is 8D which is Health and Safety so you can bolt in all your Health and Safety systems around your construction model.’ 
    ‘Equip yourself with an understanding of all the available features so you can choose the right software for your needs.’
    ‘When starting out with new software it is necessary for the project leader to ensure that their staff get the appropriate training for using the software.’
    ‘I must stress that you have to implement it correctly at the very beginning. You need to get your naming conventions in, you need to get everybody on to the same page.’ 

    VALUABLE RESOURCES
    https://www.ianjrogers.com/

    ABOUT THE HOST
    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD
    https://www.ianjrogers.com/

    Hosted on Acast. See acast.com/privacy for more information.

    20 min
  • Leadership In The Built Environment

    Following on from the last episode of Property Done Properly on Leadership Styles, Ian concentrates more specifically on the built environment and the challenges and benefits regarding the leadership within construction. He will cover how good leaders can improve the industry, capability and scaling up, finding the best people, inspiring your team with the vision, frequent and effective communication, enabling and empowering your workforce, deepening your knowledge with questions and review, making decisions based on available insights and data and becoming a strong leader.

     

    KEY TAKEAWAYS

    • The most potent challenges are balancing technical abilities and leadership skills. You need to come from a basis of substantive knowledge.
    • Good leaders can improve the industry with the right people with the right core values, a strong strategy that differentiates you from the companies they compete with, a drive to deliver with flawless execution and good time management.
    • Having the right mix of in-house capability and reliable top-grade vendors can ensure success with a dependable strong team.
    • As a leader, the team relies on you to set the vision of the project and communicate to motivate their activities. A strategic vision shared by all will require your communication skills as a leader.
    • A good leader needs to enable and empower their workforce to succeed. They need the resources and support they need to do their best work. Empower your team to make problem-solving decisions.
    • Work to develop a deeper understanding of the project that you're working on. Understand how each team's objectives play into completing the project effectively.
    • Leaders must make effective decisions when unexpected problems arise. Your ability to assess a problem and its potential impact on the project and work independently, or with your team, to mitigate the issue is a key aspect of great leadership.  

    BEST MOMENTS        

    ‘The Construction Industry is one of the most costly and risky endeavours that you can probably undertake. It is also technically demanding and commonly involves long time frames. From inception to realisation can be many, many years.’

    ‘Unfortunately within the construction industry in particular there are a lot of dictatorial type leadership styles, managed by fear, control and that sort of thing.’

    ‘Clear and concise communication can improve teamwork and project collaboration. Poor communication can lead to confusion and misunderstandings causing delays and issues in the project process.’

    ‘It will grow them as individuals so that you can grow as a team. I was always taught that you can’t go to the next stage in your career until you’ve got somebody in your team who is capable of doing your current job.’

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole-life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

     https://www.ianjrogers.com/

     

     

     

     

    Hosted on Acast. See acast.com/privacy for more information.

    17 min
  • Leadership Style

    Knowing the characteristics of different leadership styles can help business leaders adapt and lead effectively in any situation. As human beings, we are all different and so we all have different leadership styles. It is advantageous to understand these and how we interact together so we can create a homogenous team.

    Ian will cover the most common types of leadership and how they can affect you and how you develop and recognise different styles.

    KEY TAKEAWAYS

    • Strong leadership is central to any business success including property. Achieving this requires the flexibility to switch between different relevant leadership styles.
    • Coaching leaders view their teams as reservoirs of talent to be developed. Individuals' strengths are nurtured and motivated.
    • Servant leaders consider their job to be empowering their teams to succeed. In a team setting, they set clear targets and discuss and provide the circumstances to meet that goals. If the team falls behind, the leader pitches in.
    • Autocratic leaders establish a clear vision and end goal and how to achieve it. They have clear expectations on what, when and how tasks should be done. They expect people to act on their instructions immediately.
    • Laissez-faire leaders trust employees to meet their own goals with their methods and creativity.
    • Democratic leaders tend to seek employees input before making a decision and work from within the team.
    • The Pacesetter coaches team members to run hard and fast. They work with the team to set examples and high expectations.
    • The Visionary Leader is strongly committed to purpose and big-picture end goals. They set objectives with the finish line in mind and set a future vision to engage and energise employees.
    • Transactional leaders are about efficiency and sustainability. Employees are rewarded for positive performance and punished for negative. It presumes the worker is motivated only by compensation.
    • Bureaucratic leaders are rule-keepers and serve a secure operating framework. They oversee the function and rarely express creativity.
    • Facilitative leaders put employees first. They focus on creating harmonious and peaceful collaboration. They are effective morale raisers and conflict resolution specialists.

    BEST MOMENTS        

    ‘To motivate teams and harness talent, leaders must effectively communicate with, delegate to, and mentor employees while inspiring them to pursue the company’s business purpose and mission.’

    ‘Coaching leadership is most effective when leaders have the time to devote to individual employees.’

    ‘The pros to a servant leader is they create independent teams and positive company culture.’

    ‘The phrase you’re most likely to hear from a bureaucratic leader is ‘that’s not the way we do things around here, it's always been this way and that’s how we get on with it.’’

    ‘Exclusively positive feedback can stifle an employee's learning and growth.’

    ‘Leadership style is usually rooted in personal preferences which can be difficult to change. That doesn’t mean it’s not worth trying.’

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

     https://www.ianjrogers.com/

     

     

     

     

    Hosted on Acast. See acast.com/privacy for more information.

    24 min
  • Financing PPP projects

    As the final part of his Public Private Partnership series, Ian follows on from his in depth look at Structured Finance in the last episode by explaining the different structures that can be put in place to finance a project. He will discuss the aim of project finance, non-recourse project finance, the flow of funds, alternatives to non-recourse project finance, Islamic finance and the various sources of finance available.

     

    KEY TAKEAWAYS

    • The specific project company (SPV) formed raises the finance through a combination of equity provided by the shareholders of the company and debt provided by the banks.
    • If the equity investors are a big enough corporation the EPC (Engineering Procurement and Construction) and ONM (Facilities Management) can be affiliated, although the SPV always remains a separate entity to mitigate risk.
    • The aim of Project Finance for the shareholders is to minimise the cost of finance for the project.
    • Equity finance is higher risk, thus higher return at 10-14%. Debt finance returns at a lower rate of 5-8%. Equity finance is kept in the project to completion.
    • Islamic finance is a specific kind of finance and represents a relatively untapped market as the Islamic world has a significant amount of money available for funding projects.
    • Debt finance can be sourced from commercial lenders, institutional investors, export credit agencies, bilateral or multilateral organisations, bond holders, or the government or authority concerned themselves.

    BEST MOMENTS        

    ‘Primarily what is called ‘step in rights’, which the lenders will have if the project company defaults, the lenders will be able to step in directly with the Contracting Authority to make sure that their debt is repaid.’

    ‘When I was doing a lot of PPPs before the financial crisis the common way of doing this was through a bond structure that then had what’s called an insurance wrapper around it to protect the bond holders.’

    ‘In my opinion, PPP structured finance don’t really work below a $50 million or £50 million value. Yes, I’ve done projects at the $20-30 million and its sort of worked but it’s not ideal.’  

    ‘Repayment of debt is generally tied to a fixed or floating rate of interest and periodic payments, very similar to your house mortgage.’

    VALUABLE RESOURCES

    https://www.ianjrogers.com/

    ABOUT THE HOST

    Ian Rogers is an entrepreneur running businesses in the Real Estate, Construction and Facilities Management arena. Ian has over 40 years’ industry experience, as he was effectively born into construction with his father having his own building company and Ian spending time working on sites from the age of 11!. As a result Ian has seen the industry from a trades person perspective, as a chartered quantity surveyor working on large commercial projects, as a project manager and then working on structured project finance through PFI/PPP deals. This has given Ian a unique whole life approach to any project by considering the end game at the beginning.

    CONTACT METHOD

     https://www.ianjrogers.com/

     

     

     

     

    Hosted on Acast. See acast.com/privacy for more information.

    23 min

About Property Done Properly

From the publisher's feed

PODCAST DESCRIPTION 
An educational and entertainment podcast in Real Estate, Construction and Facilities management covering the whole life cycle of a project from inception to…