CircuitPythonista Jepler requested that the QT Py have a spot for external flash chip on the bottom for expansion. Your wish is my command! Voila rev B, with a SOIC 8 on the bottom connected to a hardware SPI port. Not much else changed here, it is ready for another prototype revision and maybe a pretty silkscreen!

...and! here is the QT Py with lots of STEMMA QT devices: OLEDs and sensors - oh my! The QT Py is a SAMD21 board that can plug n play with any of our 50+ STEMMA QT boards, like this 128x128 OLED, PM2.5 Air Quality sensor, pressure/humidity/temp sensor and 9-DoF IMU. No soldering required, this is the easiest way to build electronics...coming soon to the adafruit shop!

http://adafruit.com/qtpy

#circuitpython

#adafruit

#qtpy

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------