Technically Speaking - A Building Podcast

[1:09] The three types of shrinkage cracks and how to determine if a crack in concrete is structural or cosmetic.

[3:06] How chlorides and other contaminants cause corrosion in a structure’s steel frame.

[4:43] A crack in concrete is akin to an open wound in the structure.

[6:41] Understanding freeze-thaw cracks, restraint cracks, and other common causes of concrete cracks.

[12:06] Examining the possible hazards if cracks in concrete are left unrepaired.

[14:04] Evaluating cracks in concrete structures.

[17:32] Repair options, maintenance cycles, and subsequent protection for concrete cracks.

Resources:

ETC Website

American Concrete Institute

Listen to more 

Behind the Masonry Wall

 Podcast Episodes

[1:34] How long a retaining wall will last depends on whether it is built with timber, concrete or masonry, or segmental block.

[7:46] Recommended maintenance for retaining walls.

[10:26] Typical cost associated with installing or replacing retaining walls.

[13:00] Top three considerations when choosing a retaining wall replacement.

[18:01] Geotechnical reports and permits are common requirements before installation or replacement of a retaining wall.

[20:39] Changed Use and Fall protection guidelines for retaining walls.

Resources:

ETC Website

Listen to more 

Behind the Masonry Wall

 Podcast Episodes

[1:13] Before removing a stain, find the origin.

[3:20] Take care when pressure washing common white calcium stains.

[5:33] Advice for removing graffiti from high-traffic areas.

[7:46] Painting a brick building is inadvisable and costly to reverse.

[12:03] Tips for reducing the cost of external building maintenance.

[16:01] Rules-of-thumb for repointing a masonry wall.

[21:28] Flashings can reduce water intrusion around tops of walls and coping stones.

Resources:

ETC Website

Listen to more Behind the Masonry Wall  Podcast Episodes

[1:09] Simple upgrades that do not require a permit or approval to increase the eye appeal of a building or units.

[3:04] Tips for upgrading kitchens and storage areas to increase rental income.

[8:00] Puck lighting creates an attractive ambiance under kitchen cabinets.

[9:21] Bumper stops and hinges can refine cabinets and doors.

[11:51] Prospective renters notice enhanced fixtures in kitchens and baths.

[14:02] Corridor and common area considerations for apartment buildings.

[21:56] A hefty investment is no longer needed to offer desirable amenities.

[25:28] Recommendations for beautifying bedrooms.

[1:01] The structural failure possibilities of water infiltration due to inadequate installation of control joints.

[3:38] How to fix cracks due to the lack of control joints.

[7:28] Cracks in parapet walls and the Brick Industry Association recommendations for control joints.

[8:17] The importance of the binding of brick to mortar, and wall ties.

[13:06] Antiquated header courses increase the structural failure rate.

[15:45] Common problems with corrugated wall ties.

[16:30] Ninety percent of water intrusion issues are due to flashings and lack of end dams.

[22:01] Benefits and concerns about mortar nets.

Engineering and Technical Consultants (ETC) is a team of engineers, architects and building professionals helping property managers & owners identify and correct building problems. We share practical information, along with industry tips-and-tricks from the challenging construction world. There's no hidden agenda - we're just here to serve as your trusted advisors. @etc-web.com