We're wrapping up our WLED board design (https://www.youtube.com/watch?v=M4Ybd8CdQYM) and the last part we need to spec out is the 3.3V regulator. Since we are utilizing USB PD or DC in, we could be running from 5V ~ 24VDC. For the 5V output, we only need a few mA, so we're going to pick the same LDO family we sourced earlier (https://www.youtube.com/watch?v=H_0Kua2UZCs) but for the 3.3V we need at least 500mA of current for the ESP32 chip, so a switching supply is necessary! Let's find something inexpensive with 1A+ output, 24V+ input, and we're also going to need something small so minimal passives and high frequency.

See the chosen part on DigiKey https://www.digikey.com/short/rt5jw5qj

-----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com

LIVE CHAT IS HERE! http://adafru.it/discord

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/