The Infill Podcast - The Place For 3D Printing

In this video we’re joined by Ankur Verma of 3DUnplugged and the DAKSH toolchanger project. Brought to you by PCBWay. Register at https://jle.vi/pcbway and get a $5 welcome bonus!
Starting off by building his (and India's first) Voron 2.4 printer in the pandemic days, Ankur has been involved in exploring multi-material 3D printing over the last few years. His first foray into this exciting and challenging world was the IDEX Switchwire printer with two independent heads in 2022 - the first one to bring Hybrid CoreXY/CoreXZ kinematics into Klipper.
Shifting his focus next to the multi-headed tool changer ecosystem, he designed and released the WP-DAKSH V1 Tool Changer with six independent tool heads. It utilized an innovative servo-based locking mechanism along with 3D printed parts to deliver a reliable and fast tool changer experience.
The latest release from him, DAKSH V2 Tool Changer, further brings down the tool change time from v1's 9 seconds to an ultra-fast sub-4 seconds, while adding to the reliability and fast printing aspects. DAKSH V2 Tool Changer is also fully mechanical without the need for a servo or motor-based locking mechanism and can be fully assembled using only 3D printed parts and off-the-shelf components, bypassing the need for machined parts.
A software engineer by training, he has also been working on incorporating intelligence into the multi-material printing workflow with predictive toolhead management and error detection systems built into the DAKSH Tool Changer.
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 3DUnplugged on YouTube: https://www.youtube.com/@ankurv2k8
👉 DAKSH 3D Printed Tool Changer: https://github.com/ankurv2k6/daksh-toolchanger-v2
👉 Voron India's Discord: https://discord.gg/Sp7APbVPFf
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this video we’re joined by Fedor Sosnin of 3DPrintSOS. Brought to you by PCBWay. Register at https://jle.vi/pcbway and get a $5 welcome bonus!
Fedor came from a Graphic/UX/Web Design background. He started getting into 3D printing when the Ender 3 was released. Shortly after he got addicted to building and testing machines and tried his hand at making YouTube videos.
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS MENTIONED IN THE VIDEO: 🔗
👉 3DPrintSOS on YouTube: https://www.youtube.com/@3DPrintSOS/
👉 Support 3DPrintSOS: https://www.patreon.com/3dprintsos
👉 Follow Fedor on Instagram: https://www.instagram.com/3dprintsos
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this video we’re joined by Anthony Dragone of Positron3D. Brought to you by PCBWay. Register at https://jle.vi/pcbway and get a $5 welcome bonus!
Anthony, also known as The Nomad, is the General Manager of the Positron Project. He was brought onto the team by Kralyn to help him manage and maintain the business side of things.
When Kralyn and him started working together, they decided to focus on creating a team similar to the Voron team, letting their designs be open source, and working with manufacturers like LDO to create kits for sale. Since then, he's been working closely with the LDO team as well as with the community to shepherd the Positron Project towards success.
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 Postron3D: https://positron3d.com/
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this video we’re joined by Alan Mandic of @MandicReally . Brought to you by PCBWay. Check them out for all your professional fabrication needs at https://jle.vi/pcbway
You guys are going to love this episode - I sure did. We talk 3D printers, what's worth keeping, what isn't, which ones we're excited about, and more. Stick around for a discussion of the current state of CANBUS, as well as a broader discussion of what it's like "behind the scenes" for two 3D printing content creators.
Enjoy, and please let us know in the comments if you enjoy this format!
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 MandicReally on YouTube: https://www.youtube.com/@MandicReally
👉 Alan's new channel, https://www.youtube.com/@MandicLabs
👉 Support Alan: https://www.patreon.com/MandicReally
👉 MandicReally on Thangs: https://thangs.com/designer/MandicReally
👉 Alan's links and socials: https://www.mandicreally.com/links
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this video we’re joined by Jonathan Kobylanski of @Keep-Making . Brought to you by PCBWay. Check them out for all your professional fabrication needs at https://jle.vi/pcbway
Throughout this episode, Jonathan shares with us his story of becoming a full time digital creative and maker, making a living with his designs, as well as his biggest project to date, the MultiBoard. He also shares some tips on what to watch out for if YOU want to create a paid project, what's working, and what hasn't worked.
If you'd like to check out the MultiBoard, and support this channel, visit https://jle.vi/multiboard - this costs Jonathan nothing.
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 Keep Making on YouTube: https://www.youtube.com/@Keep-Making
👉 Maker Tales on YouTube: https://www.youtube.com/makertales
👉 MultiBoard website: https://multiboard.io
👉 Follow Jonathan on Instagram: https://www.instagram.com/KeepMakingOn
👉 Follow Jonathan on X: https://twitter.com/KeepMakingOn
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this video we’re joined by Clayton Parker aka Uncle Jessy. Brought to you by PCBWay. Check them out for all your professional fabrication needs at https://jle.vi/pcbway
If you're looking to break a 3D Printer or have an unhealthy Magneto obsession then Uncle Jessy might be the youtuber for you!
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 Subscribe to Uncle Jessy on YouTube: https://www.youtube.com/channel/UC8i8e7likh-EYMq1bZ0ttHw
👉 Support Uncle Jessy on Patreon: https://www.patreon.com/UncleJessy
👉 Shop Shop 3D Printed Replica Props / Cosplay & More by Uncle Jessy: https://www.etsy.com/shop/UncleJessy4Real
👉 Follow Uncle Jessy on X: https://twitter.com/UncleJessy4Real
👉 Follow Uncle Jessy on Instagram: https://www.instagram.com/unclejessy4real/?hl=en
👉 Like Uncle Jessy on Facebook: https://www.facebook.com/UncleJessy4Real/
👉 Follow Uncle Jessy on TikTok: https://www.tiktok.com/@unclejessy4real
👉 My LDO Positron V3 review: https://youtu.be/6qdbGFrwt8U
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this video we’re joined by Bob Clagett, the man behind I Like to Make Stuff. Brought to you by PCBWay. Check them out for all your professional fabrication needs at https://jle.vi/pcbway
It doesn’t matter what the material is, or what it’s for… Bob Clagett loves making stuff. He loves showing other people how he works, to hopefully inspire them, and empower them to make whatever it is that they’re passionate about.
In this episode, Bob shares a TON of incredibly valuable insights and experiences. My biggest takeaway was just understanding how, after 11 years of "making stuff" every day, Bob is still passionate and engaged... and how YOU can be, too!
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 I Like To Make Stuff: https://iliketomakestuff.com/
👉 Support I Like To Make Stuff on Patreon: https://www.patreon.com/iliketomakestuff
👉 Subscribe to I Like To Make Stuff's YouTube channel: https://www.youtube.com/@Iliketomakestuff
👉 Like I Like To Make Stuff on Facebook: https://www.facebook.com/iltms/
👉 Follow I Like To Make Stuff on Instagram: https://www.instagram.com/iliketomakestuff/?hl=en
👉 Follow I Like To Make Stuff on X: https://twitter.com/iliketomakestuf?lang=en
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this video we’re joined by Lars Brubaker of MatterHackers. Brought to you by PCBWay. Check them out for all your professional fabrication needs at https://jle.vi/pcbway
Lars Brubaker was one of the three original founders of MatterHackers, establishing the company in 2012. He has served in many roles over the course of MatterHackers' evolution, including customer support, sales, shipping, investor relations, hiring, software development, systems design, and management coaching. During the company's history, he has done whatever was needed to help build MatterHackers into the largest independent 3D printer reseller in the U.S.
Prior to his position at MatterHackers, Lars was the CEO of Reflexive Entertainment, Inc., a company he co-founded with three partners in 1997. In addition to managing the company, he was a key member in the development of over a dozen games and a game distribution platform—the Reflexive Arcade. Reflexive Entertainment was acquired by Amazon Inc. in 2008. Over the following three years with Amazon, Lars was a senior manager running operations at Amazon’s new game subsidiary—the precursor to what would ultimately become Amazon Game Studios. He also served as a Principal Engineer, assisting with the technical evaluation of several companies and products, attending senior management meetings to advise on the gaming industry, and contributing to teams building new technologies for Amazon's mobile, tablet, and Kindle businesses.
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 https://jle.vi/matterhackers (referral link!)
👉 Follow MatterHackers on Facebook: https://www.facebook.com/MatterHackers/
👉 Follow MatterHackers on Instagram: https://www.instagram.com/matterhackers/?hl=en
👉 Follow MatterHackers on X: https://twitter.com/MatterHackers
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this episode, we’re joined by the founders of Construct3D, an innovative 3D printing company out of the UK. Brought to you by PCBWay: https://jle.vi/pcbway
Jacob and Thérèse Lord are a mother-son team focused on creating innovative, high-performance 3D printers, made in the UK. In this episode, we’ll explore their story, their products, and learn about the challenges of starting a 3D printing company in Europe in 2023.
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 Construct3D's website: https://construct-3d.com
👉 Follow Construct3D on X: https://twitter.com/Construct3D_AM
👉 Follow Construct3D on Facebook: https://www.facebook.com/profile.php?id=100077461339554
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

In this episode, we host another one of my favorite content creators, Travis from @ShopNation . Brought to you by PCBWay. Check them out for YOUR next project at https://jle.vi/pcbway
Travis Lathrop is a mechanical engineer, full time content creator, and a 3D printing entrepreneur. His background is in manufacturing, industrial 3D printing, and CNC machine tools. He currently runs a production print farm composed of over 50 3D printers manufacturing parts that he sells.
🤫 Get behind the scenes and exclusive content on my Patreon: https://patreon.com/thenextlayer
💬 JOIN MY DISCORD: https://jle.vi/tnl-discord
🔗 LINKS 🔗
👉 Subscribe to Travis' YouTube channel: https://www.youtube.com/@ShopNation
👉 Visit Shop Nation's website: www.shopnationstore.com
👉 Check out Shop Nation on Etsy: https://www.etsy.com/shop/ShopNationStore
👉 Follow Shop Nation on Instagram: https://www.instagram.com/dreamshopnation/?hl=en
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: https://kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: https://kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: https://jle.vi/polymaker
📍 My favorite 3D printer right now: https://jle.vi/voronkits | https://jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: https://jle.vi/sovol
📍 Check out the official TNL merch: https://shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: https://jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: https://youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: https://patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: https://jle.vi/links
💬 Join My Discord: https://jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter