Hi and Thanks for listening to the episode 19 of the Welding Tips and Tricks Podcast.  For this episode we had the pleasure of talking with Rory May also known as Dirty Smith.  We had a great time chatting with Rory about the art of being a Blacksmith.  To us this was a very interesting because we're all metal workers but a Blacksmith is a true metal worker.  So hit download on your favorite podcast platform, pop those earbuds in, hit play, drop your hood, and enjoy.

  Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody   Show Times and Notes  

• 0:00-0:42               Introduction
• 0:42-1:36               Starting something new
• 1:36-6:37               How Rory got started
• 6:37-7:16               Wrong direction
• 7:16-10:51             Forge welding
• 10:51-12:47           Mixed gas forge?
• 12:47-14:57           Flux
• 14:57-17:35           What if we try this
• 17:35-19:58           What do you make?
• 19:58-21:52           Solid bronze
• 21:52-25:19           Aluminum
• 25:19-27:20           Starting a job
• 27:20-29:17           Jimmy Diresta
• 29:17-31:03           Make it all?
• 31:03-34:12           The math
• 34:12-35:57           Thinking differently 
• 35:57-38:37           5 hour
• 38:37-40:51           What to start with
• 40:51-43:09           Starter tools
• 43:09-46:25           Making tools and Materials
• 46:25-50:43           Power Hammer and Heat treating
• 50:43-55:27           Favorite type of work?
• 55:27-56:58           Tell me how to
• 56:58-1:01:35        YouTube
• 1:01:35-1:05:46     Someones Got to Do It
• 1:05:46-1:06:39     Shout out to Mike
• 1:06:39-1:12:30     Getting started
• 1:12:30-1:16:57     The Forge Weld Podcast
• 1:16:57-1:18:48     Making It Podcast
• 1:18:48-1:21:47     Best advise
• 1:21:47-1:23:37     Where can you find Rory?
• 1:23:37-1:24:59     Closing 

  Where can you find Rory?   On Instagram @dirtysmith On the Web Dragon Forge LTD  dirtysmith.com  Podcast  The Forge Weld      Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thanks for listening to the episode 19 of the Welding Tips and Tricks Podcast.  For this episode we had the pleasure of talking with Rory May also known as Dirty Smith.  We had a great time chatting with Rory about the art of being a Blacksmith.  To us this was a very interesting because we're all metal workers but a Blacksmith is a true metal worker.  So hit download on your favorite podcast platform, pop those earbuds in, hit play, drop your hood, and enjoy.

  Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody   Show Times and Notes  

• 0:00-0:42               Introduction
• 0:42-1:36               Starting something new
• 1:36-6:37               How Rory got started
• 6:37-7:16               Wrong direction
• 7:16-10:51             Forge welding
• 10:51-12:47           Mixed gas forge?
• 12:47-14:57           Flux
• 14:57-17:35           What if we try this
• 17:35-19:58           What do you make?
• 19:58-21:52           Solid bronze
• 21:52-25:19           Aluminum
• 25:19-27:20           Starting a job
• 27:20-29:17           Jimmy Diresta
• 29:17-31:03           Make it all?
• 31:03-34:12           The math
• 34:12-35:57           Thinking differently 
• 35:57-38:37           5 hour
• 38:37-40:51           What to start with
• 40:51-43:09           Starter tools
• 43:09-46:25           Making tools and Materials
• 46:25-50:43           Power Hammer and Heat treating
• 50:43-55:27           Favorite type of work?
• 55:27-56:58           Tell me how to
• 56:58-1:01:35        YouTube
• 1:01:35-1:05:46     Someones Got to Do It
• 1:05:46-1:06:39     Shout out to Mike
• 1:06:39-1:12:30     Getting started
• 1:12:30-1:16:57     The Forge Weld Podcast
• 1:16:57-1:18:48     Making It Podcast
• 1:18:48-1:21:47     Best advise
• 1:21:47-1:23:37     Where can you find Rory?
• 1:23:37-1:24:59     Closing 

  Where can you find Rory?   On Instagram @dirtysmith On the Web Dragon Forge LTD  dirtysmith.com  Podcast  The Forge Weld      Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and thanks for listening to episode 18 of the Welding Tips and Tricks Podcast.  For this weeks episode we wanted to talk about the importance of tolerances.  Just because you can lay a nice bead doesn't mean the part is good if you can't hold dimensions.  Hope you can pick up a few tips from this talk to help up your game or just realize the importance of paying attention to dimensional details.  So download, pop in those earbuds, hit play, drop your hood, and enjoy!

  Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody Show Times and Notes  

• 0:00-1:30              Introduction
• 1:30-2:44              Welding sequence
• 2:44-4:46              Go to the Max
• 4:46-6:41              It shrinks
• 6:41-8:41             Welding Distortion Fundamentals
• 8:41-9:33              Better to be a little over to start
• 9:33-10:08            Mr. Shrink
• 10:08-10:57          What works for you
• 10:57-12:34          Magic hammer
• 12:34-16:00          Has to go back together right
• 16:00-20:52          Jonathan's tolerances
• 20:52-21:56          Know the parts you're on
• 21:56-27:45          Stacking Tolerances
• 27:45-29:28          One tape pull
• 29:28-44:08          Fixtures
• 44:08-46:02          Tolerances on prints
• 46:02-48:58          Machinist tolerances
• 48:58-53:13          Tolerances change the price
• 53:13-54:56          Just make it thicker
• 54:56-57:02          Writing on a controlled document 
• 57:02-58:35          Reference Only
• 58:35-1:00:21       Tape differences
• 1:00:21-1:02:00    Calibrated tools 
• 1:02:00-1:06:48    Check your squares
• 1:06:48-1:07:26    Calibrating a tape
• 1:07:26-1:08:48    Look at the finale product
• 1:08:48-1:13:39    Simple tools
• 1:13:39-1:15:55    Go/No Go gauges
• 1:15:55-1:18:35    Metrology/GD&T/Six Sigma
• 1:18:35-1:20:26    Measure twice cut once
• 1:20:26-1:21:31    Step back and look
• 1:21:31-1:24:35    First Article  Inspections
• 1:24:35-1:26:26    Drives the pay up
• 1:26:26-1:28:17   Thaddeus Stevens College of Technology
• 1:28:17-1:30:02    Wrapping it up
• 1:30:02-1:30:48    Sponsor Large Time Fab's Welder's Coffee
• 1:30:48-1:31:57    Closing

   Thank you to our Sponsor!   Thank you Welder's Coffee for sponsoring this episode.  If you have not tried Large Time Fab's Welder's Coffee you need to give it a go.  Every order is roasted after it has been ordered for peak freshness and flavors.  So head over to to largetimefab.bigcartel.com and order a pound or two!  You wont regret it!  YOu can find him on Instagram at @largetimefab Be sure to tell him Welding Tips and Tricks Podcast sent you.       Where can you find Us?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

  

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free

Hi and thanks for listening to episode 18 of the Welding Tips and Tricks Podcast.  For this weeks episode we wanted to talk about the importance of tolerances.  Just because you can lay a nice bead doesn't mean the part is good if you can't hold dimensions.  Hope you can pick up a few tips from this talk to help up your game or just realize the importance of paying attention to dimensional details.  So download, pop in those earbuds, hit play, drop your hood, and enjoy!

  Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody

Show Times and Notes  

• 0:00-1:30              Introduction
• 1:30-2:44              Welding sequence
• 2:44-4:46              Go to the Max
• 4:46-6:41              It shrinks
• 6:41-8:41             Welding Distortion Fundamentals
• 8:41-9:33              Better to be a little over to start
• 9:33-10:08            Mr. Shrink
• 10:08-10:57          What works for you
• 10:57-12:34          Magic hammer
• 12:34-16:00          Has to go back together right
• 16:00-20:52          Jonathan's tolerances
• 20:52-21:56          Know the parts you're on
• 21:56-27:45          Stacking Tolerances
• 27:45-29:28          One tape pull
• 29:28-44:08          Fixtures
• 44:08-46:02          Tolerances on prints
• 46:02-48:58          Machinist tolerances
• 48:58-53:13          Tolerances change the price
• 53:13-54:56          Just make it thicker
• 54:56-57:02          Writing on a controlled document 
• 57:02-58:35          Reference Only
• 58:35-1:00:21       Tape differences
• 1:00:21-1:02:00    Calibrated tools 
• 1:02:00-1:06:48    Check your squares
• 1:06:48-1:07:26    Calibrating a tape
• 1:07:26-1:08:48    Look at the finale product
• 1:08:48-1:13:39    Simple tools
• 1:13:39-1:15:55    Go/No Go gauges
• 1:15:55-1:18:35    Metrology/GD&T/Six Sigma
• 1:18:35-1:20:26    Measure twice cut once
• 1:20:26-1:21:31    Step back and look
• 1:21:31-1:24:35    First Article  Inspections
• 1:24:35-1:26:26    Drives the pay up
• 1:26:26-1:28:17   Thaddeus Stevens College of Technology
• 1:28:17-1:30:02    Wrapping it up
• 1:30:02-1:30:48    Sponsor Large Time Fab's Welder's Coffee
• 1:30:48-1:31:57    Closing

   Thank you to our Sponsor!   Thank you Welder's Coffee for sponsoring this episode.  If you have not tried Large Time Fab's Welder's Coffee you need to give it a go.  Every order is roasted after it has been ordered for peak freshness and flavors.  So head over to to largetimefab.bigcartel.com and order a pound or two!  You wont regret it!  YOu can find him on Instagram at @largetimefab Be sure to tell him Welding Tips and Tricks Podcast sent you.       Where can you find Us?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

  

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free

Hi and Thanks for listening to the Welding Tips and Tricks Podcast.  This is a special episode where we talk with Jody while he is at FabTech 2016.  Just a brief overview of what's going on.  Hope you enjoy this little chat!  Wish we could have recorded a live episode there.  Maybe next year in Chicago!  Let us know if you'd like that!

 

Hi and Thanks for listening to the Welding Tips and Tricks Podcast.  This is a special episode where we talk with Jody while he is at FabTech 2016.  Just a brief overview of what's going on.  Hope you enjoy this little chat!  Wish we could have recorded a live episode there.  Maybe next year in Chicago!  Let us know if you'd like that!

 

Hi and Thank you for listening to episode 17 of the Welding Tips and Tricks Podcast.  For this episode we had the pleasure of talking with Jason Moser from Moser Fab.  If you're not familiar with Jason's work you need to check him out of Instagram @Moser_Fab.  We had a great time hearing about Jason's past and plans for the future.  So hit download, pop those earbuds in, hit play, drop your hood, and enjoy.  

  Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody   Show Notes and Times  

• 0:00-0:36              Introductions
• 0:36-1:54              Instagram name change
• 1:54-4:20              FabTech Meeting
• 4:20-6:27              What got Jason started
• 6:27-8:42              Jumping off point
• 8:42-10:56            Instagram is Humbling
• 10-56-11:59          Really never know
• 11:59-14:05          Make it look Cool
• 14:05-15:22          Always learning
• 15:22-16:13          Equipment Jason uses
• 16:13-19:27          Plasma or Flame
• 19:27-20:35          Average thickness
• 20:35-21:07          Dual Shield Fluxcore
• 21:07-24:49          Certifications needed 
• 24:49-26:35          Approaching a job 
• 26:35-27:34          Repeat repairs
• 27:34-28:41          How did you do that!?!
• 28:41-29:36          Moser Fab
• 29:36-31:24          Tig welding copper and brass
• 31:24-35:35          Different types of work
• 35:35-36:39          Favorite type of work
• 36:39-37:57          Pulser
• 37:57-40:47          Aluminum Spool Gun 
• 40:47-47:01          Jason dislikes 
• 47:01-51:06          Best advise
• 51:06-51:42          Different processes
• 51:42-52:20          #WeaveWednesday
• 52:20-56:27          What got Jason onto Instagram
• 56:27-59:27          Fun outside of work
• 59:27-1:01:40       The podcast
• 1:01:40-1:03:13    Full time Moser Fab
• 1:03:13-1:07:44    HR Looking at Social Media
• 1:07:44-1:09:16    Replacement 
• 1:09:16-1:11:15    Eye opener for new weldors
• 1:11:15-1:13:00    Tips on positioner work
• 1:13:00-1:13:48    Wrapping it up
• 1:13:48-1:14:11    Where to find Jason
• 1:14:11-1:15:05    Closing 

    Thank you to our Sponsor!   Thank you Welder's Coffee for sponsoring this episode.  If you have not tried Large Time Fab's Welder's Coffee you need to give it a go.  Every order is roasted after it has been ordered for peak freshness and flavors.  So head over to to largetimefab.bigcartel.com and order a pound or two!  You wont regret it!  YOu can find him on Instagram at @largetimefab Be sure to tell him Welding Tips and Tricks Podcast sent you.       Where can you find Jason Moser?    Instagram @Moser_Fab On the Web at Moser Fab   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thank you for listening to episode 17 of the Welding Tips and Tricks Podcast.  For this episode we had the pleasure of talking with Jason Moser from Moser Fab.  If you're not familiar with Jason's work you need to check him out of Instagram @Moser_Fab.  We had a great time hearing about Jason's past and plans for the future.  So hit download, pop those earbuds in, hit play, drop your hood, and enjoy.  

  Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody  
Show Notes and Times  

• 0:00-0:36              Introductions
• 0:36-1:54              Instagram name change
• 1:54-4:20              FabTech Meeting
• 4:20-6:27              What got Jason started
• 6:27-8:42              Jumping off point
• 8:42-10:56            Instagram is Humbling
• 10-56-11:59          Really never know
• 11:59-14:05          Make it look Cool
• 14:05-15:22          Always learning
• 15:22-16:13          Equipment Jason uses
• 16:13-19:27          Plasma or Flame
• 19:27-20:35          Average thickness
• 20:35-21:07          Dual Shield Fluxcore
• 21:07-24:49          Certifications needed 
• 24:49-26:35          Approaching a job 
• 26:35-27:34          Repeat repairs
• 27:34-28:41          How did you do that!?!
• 28:41-29:36          Moser Fab
• 29:36-31:24          Tig welding copper and brass
• 31:24-35:35          Different types of work
• 35:35-36:39          Favorite type of work
• 36:39-37:57          Pulser
• 37:57-40:47          Aluminum Spool Gun 
• 40:47-47:01          Jason dislikes 
• 47:01-51:06          Best advise
• 51:06-51:42          Different processes
• 51:42-52:20          #WeaveWednesday
• 52:20-56:27          What got Jason onto Instagram
• 56:27-59:27          Fun outside of work
• 59:27-1:01:40       The podcast
• 1:01:40-1:03:13    Full time Moser Fab
• 1:03:13-1:07:44    HR Looking at Social Media
• 1:07:44-1:09:16    Replacement 
• 1:09:16-1:11:15    Eye opener for new weldors
• 1:11:15-1:13:00    Tips on positioner work
• 1:13:00-1:13:48    Wrapping it up
• 1:13:48-1:14:11    Where to find Jason
• 1:14:11-1:15:05    Closing 

    Thank you to our Sponsor!   Thank you Welder's Coffee for sponsoring this episode.  If you have not tried Large Time Fab's Welder's Coffee you need to give it a go.  Every order is roasted after it has been ordered for peak freshness and flavors.  So head over to to largetimefab.bigcartel.com and order a pound or two!  You wont regret it!  YOu can find him on Instagram at @largetimefab Be sure to tell him Welding Tips and Tricks Podcast sent you.       Where can you find Jason Moser?    Instagram @Moser_Fab On the Web at Moser Fab   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 

Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

HI and Thanks for listening to episode 16 of the Welding Tips and Tricks Podcast!  We have had a very common theme with all the guests we've had on so far.  Everyone has all said paying attention to all the small details is one of their main reasons for being a successful weldor.  Rush Kane had said 95% is the prep and %5 is the welding.  When you see his work you know he can't be wrong.  We wanted to really dive into this theory and explain how we Sweat the Details on our jobs and with our welding.  This mindset can be very important and really step your game up to the next level in welding.  Sometimes it can be as simple as stepping back and thinking about what to do before doing it.  So download this episode, hit play, drop your hood, and Enjoy!       Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody   Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Show times and Notes  

• 0:00-0:42            Introduction
• 0:42-1:54            What is Sweating the Details?
• 1:54-3:06            Details for Tig
• 3:06-6:58            Having your own setup
• 6:58-9:38            Wire brushes
• 9:38-10:35          Separated shop
• 10:35-12:45        Clean the edge
• 12:45-13:34        Do the steps needed
• 13:34-17:34        Do your job Right!
• 17:34-19:00        Chemical cleaning
• 19:00-22:17        Details for Aluminum 
• 22:17-24:48        Cleaning your wire
• 24:48-26:48        What is Etching?
• 26:48-29:27        Ultrasonic cleaning
• 29:27-30:34        Exposer rates
• 30:34-36:02        Details with Mig and Mill Scale
• 36:02-37:01        3M Bristle Brush Wheel
• 37:01-38:44        Know the end results
• 38:44-40:26        What is DA Grinding?
• 40:26-41:18        Managers never understand
• 41:18-43:27        Time in a Can
• 43:27-46:13        Right wire size
• 46:13-47:01        Jonathan's details
• 47:01-55:42        Changing your liners and tips
• 55:42-56:34        Doing your own Liner Pull Test
• 56:34-59:02        Down and Dirty Tip
• 59:02-1:02:26     Clips the wire or not
• 1:02:26-1:03:32  Take care of the shop you're in
• 1:03:32-1:04:19  Watch the scratches 
• 1:04:19-1:06:13  Welding on a Table!
• 1:06:13-1:09:30  Getting a good ground 
• 1:09:30-1:10:41  Boat owners
• 1:10:41-1:11:55  Stick Details (ICWeld Tips)
• 1:11:55-1:17:29  Wrapping it up
• 1:17:29-1:18:30  Closing

    Thank you to our Sponsor!   Thank you Welder's Coffee for sponsoring this episode.  If you have not tried Large Time Fab's Welder's Coffee you need to give it a go.  Every order is roasted after it has been ordered for peak freshness and flavors.  So head over to to largetimefab.bigcartel.com and order a pound or two!  You wont regret it!  YOu can find him on Instagram at @largetimefab Be sure to tell him Welding Tips and Tricks Podcast sent you.       Where can you find Us?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

  

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

HI and Thanks for listening to episode 16 of the Welding Tips and Tricks Podcast!  We have had a very common theme with all the guests we've had on so far.  Everyone has all said paying attention to all the small details is one of their main reasons for being a successful weldor.  Rush Kane had said 95% is the prep and %5 is the welding.  When you see his work you know he can't be wrong.  We wanted to really dive into this theory and explain how we Sweat the Details on our jobs and with our welding.  This mindset can be very important and really step your game up to the next level in welding.  Sometimes it can be as simple as stepping back and thinking about what to do before doing it.  So download this episode, hit play, drop your hood, and Enjoy!       Like what you hear? Would you like to help support the Welding Tips & Tricks Podcast? We now have a page over on Patreon. You can be Patron of our podcast at many levels and rewards for those levels. The three of us love helping the welding community but there are costs involved in producing it. Go over to www.patreon.com/weldingtipsandtrickspodcast and become one of our Patrons. Every dollar helps and we sincerely appreciate it.  Jonathan, Roy and Jody   Remember to subscribe to the podcast on your favorite platform and leave us a comment.  It really helps us out in the ranking on iTunes!  Our goal, with your help, is to be the best educational podcast for the trades on all platforms.  We really appreciate all the support we have been getting and it helps us keep moving for with this podcast!   Show times and Notes  

• 0:00-0:42            Introduction
• 0:42-1:54            What is Sweating the Details?
• 1:54-3:06            Details for Tig
• 3:06-6:58            Having your own setup
• 6:58-9:38            Wire brushes
• 9:38-10:35          Separated shop
• 10:35-12:45        Clean the edge
• 12:45-13:34        Do the steps needed
• 13:34-17:34        Do your job Right!
• 17:34-19:00        Chemical cleaning
• 19:00-22:17        Details for Aluminum 
• 22:17-24:48        Cleaning your wire
• 24:48-26:48        What is Etching?
• 26:48-29:27        Ultrasonic cleaning
• 29:27-30:34        Exposer rates
• 30:34-36:02        Details with Mig and Mill Scale
• 36:02-37:01        3M Bristle Brush Wheel
• 37:01-38:44        Know the end results
• 38:44-40:26        What is DA Grinding?
• 40:26-41:18        Managers never understand
• 41:18-43:27        Time in a Can
• 43:27-46:13        Right wire size
• 46:13-47:01        Jonathan's details
• 47:01-55:42        Changing your liners and tips
• 55:42-56:34        Doing your own Liner Pull Test
• 56:34-59:02        Down and Dirty Tip
• 59:02-1:02:26     Clips the wire or not
• 1:02:26-1:03:32  Take care of the shop you're in
• 1:03:32-1:04:19  Watch the scratches 
• 1:04:19-1:06:13  Welding on a Table!
• 1:06:13-1:09:30  Getting a good ground 
• 1:09:30-1:10:41  Boat owners
• 1:10:41-1:11:55  Stick Details (ICWeld Tips)
• 1:11:55-1:17:29  Wrapping it up
• 1:17:29-1:18:30  Closing

    Thank you to our Sponsor!   Thank you Welder's Coffee for sponsoring this episode.  If you have not tried Large Time Fab's Welder's Coffee you need to give it a go.  Every order is roasted after it has been ordered for peak freshness and flavors.  So head over to to largetimefab.bigcartel.com and order a pound or two!  You wont regret it!  YOu can find him on Instagram at @largetimefab Be sure to tell him Welding Tips and Tricks Podcast sent you.       Where can you find Us?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

  

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download