Hi and Thanks for listening to episode 10 of the the Welding Tips and Tricks Podcast.  We wanted to talk about what people call Cheats.  Whenever we post pictures with a turntable or a larger cup someone always has something to say about it, so we just wanted to bring it out into the open and hear our take on these things.  We hope you enjoy this podcast and learn a thing or two about some things that you might not have known about.  So Download, put those earbuds in, drop your hood, and enjoy!

    Show Times and Notes:    

• 0:00-0:45      Introduction
• 0:45-1:55      No such thing as Cheating
• 1:55-7:50      Turntable Welding
• 7:50-11:40     Chill Blocks
• 11:40-13:28   Purge Blocks and Fixtures
• 13:28-15:01   Aluminum angle blocks
• 15:01-16:31   Rush's angle block
• 16:31-17:30   Corner joint fixture
• 17:30-18:28   Armrest
• 18:28-19:12   The perfect welding chair
• 19:12-23:54   Big Cups
• 23:54-25:00   Purple Titanium
• 25:00-26:40   Back to Big Cups
• 26:40-28:08   Clear Cups
• 28:08-31:09   Scotchbright Diffuser
• 31:09-35:12   Bent tungstens
• 35:12-39:22   Palm slider
• 39:22-40:05   Flame Tech resistant torch track
• 40:05-40:22   Make something to try it
• 40:22-41:27   JD's shop and running your own shop
• 41:27-43:25   A good table
• 43:25-44:29   Cold wire feeder
• 44:29-46:05   Tig Pen
• 46:05-47:20   Wire straightener
• 47:20-47:57   Bodo Hand Wire Feeder 
• 47:57-49:01   Pie cut tacking fixture
• 49:01-49:58   Rush's back purging tacking
• 49:58-50:44   Closing

    Where you can find us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Fupa Cup?

 

If you're thinking of buying a Fupa Cup that we had talked about head over to Weldmongerstore.com and pick up a set.  You wont be disappointing in this purchase.  I like to use a Fupa cup for all my stainless welding.  The gas flow that comes out of this cup is great!  Really helps stabilize puddle control and flow.  Again, you wont be disappointed with this purchase.  After you weld with one you'll wonder why you waited so long.   -Roy Crumrine  Crummy Welding  

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!   Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thanks for listening to episode 10 of the the Welding Tips and Tricks Podcast.  We wanted to talk about what people call Cheats.  Whenever we post pictures with a turntable or a larger cup someone always has something to say about it, so we just wanted to bring it out into the open and hear our take on these things.  We hope you enjoy this podcast and learn a thing or two about some things that you might not have known about.  So Download, put those earbuds in, drop your hood, and enjoy!

    Show Times and Notes:    

• 0:00-0:45      Introduction
• 0:45-1:55      No such thing as Cheating
• 1:55-7:50      Turntable Welding
• 7:50-11:40     Chill Blocks
• 11:40-13:28   Purge Blocks and Fixtures
• 13:28-15:01   Aluminum angle blocks
• 15:01-16:31   Rush's angle block
• 16:31-17:30   Corner joint fixture
• 17:30-18:28   Armrest
• 18:28-19:12   The perfect welding chair
• 19:12-23:54   Big Cups
• 23:54-25:00   Purple Titanium
• 25:00-26:40   Back to Big Cups
• 26:40-28:08   Clear Cups
• 28:08-31:09   Scotchbright Diffuser
• 31:09-35:12   Bent tungstens
• 35:12-39:22   Palm slider
• 39:22-40:05   Flame Tech resistant torch track
• 40:05-40:22   Make something to try it
• 40:22-41:27   JD's shop and running your own shop
• 41:27-43:25   A good table
• 43:25-44:29   Cold wire feeder
• 44:29-46:05   Tig Pen
• 46:05-47:20   Wire straightener
• 47:20-47:57   Bodo Hand Wire Feeder 
• 47:57-49:01   Pie cut tacking fixture
• 49:01-49:58   Rush's back purging tacking
• 49:58-50:44   Closing

    Where you can find us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Fupa Cup?

 

If you're thinking of buying a Fupa Cup that we had talked about head over to Weldmongerstore.com and pick up a set.  You wont be disappointing in this purchase.  I like to use a Fupa cup for all my stainless welding.  The gas flow that comes out of this cup is great!  Really helps stabilize puddle control and flow.  Again, you wont be disappointed with this purchase.  After you weld with one you'll wonder why you waited so long.   -Roy Crumrine  Crummy Welding  

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!  
Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thank you for listening to the Welding Tips and Tricks Podcast.  This is episode 9 and we have Rush Kane as our guest.  We get to know Rush a bit more than the the photos we see on Instagram by hearing about what got him into welding and some of the special tools he has up his sleeve.  If you haven't heard of @KaneKid we strongly recommend you go check his page out while you listen to this podcast.  Hope you learn a few things from this interview because we know we sure did!  So go ahead download, pop those earbuds in, drop that hood, and Enjoy!

    Show Times and Notes    

• 0:00-0:35      Introduction
• 0:35-1:30      Active Gas
• 1:30-4:30      4047 Tig Rod
• 4:30-6:23      Helium Mix?
• 6:23-8:22      Flame off the torch from hydrogen
• 8:22-10:11    Water cooled fixture
• 10:11-11:02   What kind of chiller?
• 11:02-12:15   Controlled Shrinkage  
• 12:15-13:23   Corner Fixture
• 13:23-16:45   Rush's back story
• 16:45-19:54   Tungsten preparation
• 19:54-21:00   What machine are you using?
• 21:00-21:52   Amps for .006 wall tubing
• 21:52-23:12   Scratching your tungsten 
• 23:12-24:15   Jonathan's Cup
• 24:15-24:45   Industry Rush works in?
• 24:45-26:46   Hand rolling tubes
• 26:46-27:59   Sunk in welds?
• 27:59-29:40   Welds live on on Instagram 
• 29:40-33:05   Rush's original jewelry 
• 33:05-34:44   Feeding wire
• 34:44-35:45   Torch cushion
• 35:45-38:08   Helium testing parts
• 38:08-38:45   Job stress 
• 38:45-38:59   Surface preparation
• 38:59-41:20   Worst type of work?
• 41:20-43:40   Hand slider
• 43:40-45:15   MTV Bike welding project   
• 45:15-47:35   Struggle with the welding 
• 47:35-48:50   Unlimited amounts of continuous improvement
• 48:50-51:04   Side puddle feeding wire
• 51:04-52:04   Size of filler wire 
• 52:04-53:23   Outside of work fun
• 53:23-54:15   Thanks Rush for being on
• 54:15-54:54   Closing

  Where can you find Rush Kane?   Instagram @Kanekid Facebook  Rush Kane GTAW Email  [email protected]      Where you can find us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thank you for listening to the Welding Tips and Tricks Podcast.  This is episode 9 and we have Rush Kane as our guest.  We get to know Rush a bit more than the the photos we see on Instagram by hearing about what got him into welding and some of the special tools he has up his sleeve.  If you haven't heard of @KaneKid we strongly recommend you go check his page out while you listen to this podcast.  Hope you learn a few things from this interview because we know we sure did!  So go ahead download, pop those earbuds in, drop that hood, and Enjoy!

    Show Times and Notes    

• 0:00-0:35      Introduction
• 0:35-1:30      Active Gas
• 1:30-4:30      4047 Tig Rod
• 4:30-6:23      Helium Mix?
• 6:23-8:22      Flame off the torch from hydrogen
• 8:22-10:11    Water cooled fixture
• 10:11-11:02   What kind of chiller?
• 11:02-12:15   Controlled Shrinkage  
• 12:15-13:23   Corner Fixture
• 13:23-16:45   Rush's back story
• 16:45-19:54   Tungsten preparation
• 19:54-21:00   What machine are you using?
• 21:00-21:52   Amps for .006 wall tubing
• 21:52-23:12   Scratching your tungsten 
• 23:12-24:15   Jonathan's Cup
• 24:15-24:45   Industry Rush works in?
• 24:45-26:46   Hand rolling tubes
• 26:46-27:59   Sunk in welds?
• 27:59-29:40   Welds live on on Instagram 
• 29:40-33:05   Rush's original jewelry 
• 33:05-34:44   Feeding wire
• 34:44-35:45   Torch cushion
• 35:45-38:08   Helium testing parts
• 38:08-38:45   Job stress 
• 38:45-38:59   Surface preparation
• 38:59-41:20   Worst type of work?
• 41:20-43:40   Hand slider
• 43:40-45:15   MTV Bike welding project   
• 45:15-47:35   Struggle with the welding 
• 47:35-48:50   Unlimited amounts of continuous improvement
• 48:50-51:04   Side puddle feeding wire
• 51:04-52:04   Size of filler wire 
• 52:04-53:23   Outside of work fun
• 53:23-54:15   Thanks Rush for being on
• 54:15-54:54   Closing

  Where can you find Rush Kane?   Instagram @Kanekid Facebook  Rush Kane GTAW Email  [email protected]      Where you can find us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thanks for listening to the Welding Tips and Tricks Podcast episode 8.  We wanted to answer some of your questions so we posted a photo on Instagram asking you, our listeners, to post questions in the comments.  The listeners came through with flying colors.  We had way more than what we could get to so we picked a few to discuss.  We had a lot of fun talking about these questions and are looking forward to doing this again.  So download, put those earbuds in, drop the hood, and enjoy!  

  Show Notes and Times:  

• 0:00-0:28       Introduction
• 0:28-1:46       Hurricane weather
• 1:46-8:02       Our wives
• 8:02-11:28      Best gear to have to start
• 11:28-12:23    Get it up off the floor
• 12:23-13:53    Welding gas tanks
• 13:53-14:38    Do what you need to do
• 14:38-15:35    Outfit your shop as needed
• 15:35-16:18    Reinvest into you company
• 16:18-17:25    Jonathan's startup shop
• 17:25-19:07    Type of welder to get?
• 19:07-22:22    Taking out a loan?
• 22:22-23:15    Skin in the game
• 23:15-24:48    Buy a welder you can afford
• 24:48-28:30    New equipment we'd like
• 28:30-30:30    Portable/Stowable welding table
• 30:30-31:20    Storage
• 31:20-32:45    Make a table
• 32:45-34:00    Taking a class?
• 34:00-39:40    Schools focusing more on fabrication
• 39:40-41:39    Blueprints
• 41:39-42:23    Engineers 
• 42:23-44:15    Local Career Center
• 44:15-46:00    Manning the job 
• 46:00-46:56    The Fab School
• 46:56-48:25    Always learn!
• 48:25-50:43    Use wood fixturing
• 50:43-58:21    Respirators for welding and grinding
• 58:21-59:02    Weldor be aware
• 59:02-59:47    Thanks everyone for questions
• 59:47-1:01:00 Closing

 

Links to what we talked about 

 

James F. Lincoln Foundation

3m 6500 Half Face Piece

2097 Pink Filters

6000 series Full Face Respirator

Jimmy Diresta

  Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

 

Hi and Thanks for listening to the Welding Tips and Tricks Podcast episode 8.  We wanted to answer some of your questions so we posted a photo on Instagram asking you, our listeners, to post questions in the comments.  The listeners came through with flying colors.  We had way more than what we could get to so we picked a few to discuss.  We had a lot of fun talking about these questions and are looking forward to doing this again.  So download, put those earbuds in, drop the hood, and enjoy!  

  Show Notes and Times:  

• 0:00-0:28       Introduction
• 0:28-1:46       Hurricane weather
• 1:46-8:02       Our wives
• 8:02-11:28      Best gear to have to start
• 11:28-12:23    Get it up off the floor
• 12:23-13:53    Welding gas tanks
• 13:53-14:38    Do what you need to do
• 14:38-15:35    Outfit your shop as needed
• 15:35-16:18    Reinvest into you company
• 16:18-17:25    Jonathan's startup shop
• 17:25-19:07    Type of welder to get?
• 19:07-22:22    Taking out a loan?
• 22:22-23:15    Skin in the game
• 23:15-24:48    Buy a welder you can afford
• 24:48-28:30    New equipment we'd like
• 28:30-30:30    Portable/Stowable welding table
• 30:30-31:20    Storage
• 31:20-32:45    Make a table
• 32:45-34:00    Taking a class?
• 34:00-39:40    Schools focusing more on fabrication
• 39:40-41:39    Blueprints
• 41:39-42:23    Engineers 
• 42:23-44:15    Local Career Center
• 44:15-46:00    Manning the job 
• 46:00-46:56    The Fab School
• 46:56-48:25    Always learn!
• 48:25-50:43    Use wood fixturing
• 50:43-58:21    Respirators for welding and grinding
• 58:21-59:02    Weldor be aware
• 59:02-59:47    Thanks everyone for questions
• 59:47-1:01:00 Closing

 

Links to what we talked about 

 

James F. Lincoln Foundation

3m 6500 Half Face Piece

2097 Pink Filters

6000 series Full Face Respirator

Jimmy Diresta

  Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

 

Hi and thank you for listening to the Welding Tips and Tricks Podcast episode 7.  For this podcast we were able to catch up with Joel Buschmann to ask him a few questions about his life from a snotty nosed college kid to starting his business Overkill Racing and Chassis.  We had a lot of fun talking with Joel and we think that you'll enjoy hearing his story of life altering decisions that may inspire you to follow your dreams, as he did.  So download this episode, put those earbuds in, drop your hood, and enjoy!  

 

Show Note and Times:

 

• 0:00 - 0:32           Intro 
• 0:32 - 3:16           What does Joel build 
• 3:16 - 4:16           Mig or Tig 
• 4:16 - 6:33           Frame repairs 
• 6:33 - 9:00           Heat treating Chromolly 
• 9:00 - 10:45         Wire for Chromolly 
• 10:45 - 12:30        Hastelloy with repair 
• 12:30 - 14:17        Physics 
• 14:17 - 15:18        What machines are you running 
• 15:18 - 18:35        Air cooled/Water cooled 
• 18:35 - 32:07        Joel's backstory 
• 32:07 - 33:22        Searching Mig Welding online 
• 33:22 - 34:52        José Gomez @lostartforge 
• 34:52 - 35:40        Quick study 
• 35:40 - 36:32        The original Mig welding video 
• 36:32 - 38:00        Perfect practice makes perfect 
• 38:00 - 43:40         Tungsten grinder and prep 
• 43:40 - 48:15         Types of tungsten 
• 48:15 - 49:25         Help code 
• 49:25 - 54:45         Approaching a new truck 
• 54:45 - 58:36         What got you on Instagram 
• 58:36 - 59:24         WT&T App #sharemyweld 
• 59:24 - 1:01:38      4th grader asking a 5th grader 
• 1:01:38 - 1:02:20    Future social media 
• 1:02:20 - 1:04:01    Fabtech shot 
• 1:04:01 - 1:04:30    @frankfleurquin
• 1:04:30 - 1:09:15    Joel's best advise 
• 1:09:15 - 1:10:36     PH.D. 
• 1:10:36 - 1:13:00     Physics 
• 1:13:00 - 1:13:43     Information age 
• 1:13:43 - 1:19:17     Thanks Joel and closing 

 

Where you can fine Joel?

You can find Joel on Instagram @overkillracingandchassis

On the web at www.overkillchassis.com

 

Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and thank you for listening to the Welding Tips and Tricks Podcast episode 7.  For this podcast we were able to catch up with Joel Buschmann to ask him a few questions about his life from a snotty nosed college kid to starting his business Overkill Racing and Chassis.  We had a lot of fun talking with Joel and we think that you'll enjoy hearing his story of life altering decisions that may inspire you to follow your dreams, as he did.  So download this episode, put those earbuds in, drop your hood, and enjoy!  

 

Show Note and Times:

 

• 0:00 - 0:32           Intro 
• 0:32 - 3:16           What does Joel build 
• 3:16 - 4:16           Mig or Tig 
• 4:16 - 6:33           Frame repairs 
• 6:33 - 9:00           Heat treating Chromolly 
• 9:00 - 10:45         Wire for Chromolly 
• 10:45 - 12:30        Hastelloy with repair 
• 12:30 - 14:17        Physics 
• 14:17 - 15:18        What machines are you running 
• 15:18 - 18:35        Air cooled/Water cooled 
• 18:35 - 32:07        Joel's backstory 
• 32:07 - 33:22        Searching Mig Welding online 
• 33:22 - 34:52        José Gomez @lostartforge 
• 34:52 - 35:40        Quick study 
• 35:40 - 36:32        The original Mig welding video 
• 36:32 - 38:00        Perfect practice makes perfect 
• 38:00 - 43:40         Tungsten grinder and prep 
• 43:40 - 48:15         Types of tungsten 
• 48:15 - 49:25         Help code 
• 49:25 - 54:45         Approaching a new truck 
• 54:45 - 58:36         What got you on Instagram 
• 58:36 - 59:24         WT&T App #sharemyweld 
• 59:24 - 1:01:38      4th grader asking a 5th grader 
• 1:01:38 - 1:02:20    Future social media 
• 1:02:20 - 1:04:01    Fabtech shot 
• 1:04:01 - 1:04:30    @frankfleurquin
• 1:04:30 - 1:09:15    Joel's best advise 
• 1:09:15 - 1:10:36     PH.D. 
• 1:10:36 - 1:13:00     Physics 
• 1:13:00 - 1:13:43     Information age 
• 1:13:43 - 1:19:17     Thanks Joel and closing 

 

Where you can fine Joel?

You can find Joel on Instagram @overkillracingandchassis

On the web at www.overkillchassis.com

 

Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thank you for listening to Welding Tips and Tricks Podcast Episode 6.  We have been asked a few times to do a topic on pricing of jobs, so we thought we would go ahead and share our experiences.  We talk about our experiences and how we like to price jobs.  There's many different ways to price jobs and how to run your company, this is just how we have done it.  So download, put those earbuds in, drop your hood, and Enjoy!  

    Show Times and Notes:  

• 0:00-0:40          Introduction
• 0:40-3:46          Working smarter
• 3:46-6:30          Name of the Game
• 6:30-11:10         Net 75
• 11:10-13:05       Cash Flow
• 13:05-15:30       Minimal up front cost jobs
• 15:30-17:00       Tolerances can make or break a job
• 17:00-20:35       Customer communication  20:35-24:33       Large part tolerances
• 24:33-25:35       Fudge Factor
• 25:35-27:01       Thinking you're friends
• 27:01-28:19       No Print = No Quote
• 28:19-29:25       Sometimes you need to say No
• 29:25-33:30       Hourly rate/ Piece work/ Day rate
• 33:30-34:13       You will be working for $1.00 per hour
• 34:13-36:06       John Grimsmo Rule of Pi
• 36:06-39:02       It's not the jobs you get that make your life                            miserable
• 39:02-48:00       Instagram comment question answer
• 48:00-57:04       How we price our jobs
• 57:04-58:47       No one size fits all
• 58:47-1:01:48     Charge for rush jobs
• 1:01:48-1:03:16  Different rates for different work
• 1:03:16-1:07:10  Taxes
• 1:07:10-1:10:23  You are a real company!
• 1:10:23-1:12:25  Garage Shops
• 1:12:25-1:15:06  The right customers for you
• 1:15:06-1:18:25  Purchase orders
• 1:18:25-1:19:17  Closing and Thank You 

 

Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download

Hi and Thank you for listening to Welding Tips and Tricks Podcast Episode 6.  We have been asked a few times to do a topic on pricing of jobs, so we thought we would go ahead and share our experiences.  We talk about our experiences and how we like to price jobs.  There's many different ways to price jobs and how to run your company, this is just how we have done it.  So download, put those earbuds in, drop your hood, and Enjoy!  

    Show Times and Notes:  

• 0:00-0:40          Introduction
• 0:40-3:46          Working smarter
• 3:46-6:30          Name of the Game
• 6:30-11:10         Net 75
• 11:10-13:05       Cash Flow
• 13:05-15:30       Minimal up front cost jobs
• 15:30-17:00       Tolerances can make or break a job
• 17:00-20:35       Customer communication 
  20:35-24:33       Large part tolerances
• 24:33-25:35       Fudge Factor
• 25:35-27:01       Thinking you're friends
• 27:01-28:19       No Print = No Quote
• 28:19-29:25       Sometimes you need to say No
• 29:25-33:30       Hourly rate/ Piece work/ Day rate
• 33:30-34:13       You will be working for $1.00 per hour
• 34:13-36:06       John Grimsmo Rule of Pi
• 36:06-39:02       It's not the jobs you get that make your life                            miserable
• 39:02-48:00       Instagram comment question answer
• 48:00-57:04       How we price our jobs
• 57:04-58:47       No one size fits all
• 58:47-1:01:48     Charge for rush jobs
• 1:01:48-1:03:16  Different rates for different work
• 1:03:16-1:07:10  Taxes
• 1:07:10-1:10:23  You are a real company!
• 1:10:23-1:12:25  Garage Shops
• 1:12:25-1:15:06  The right customers for you
• 1:15:06-1:18:25  Purchase orders
• 1:18:25-1:19:17  Closing and Thank You 

 

Where can you find us at?     You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.   Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram

 

Where can you find a Tig Finger?

You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.

 

This Podcast has been brought to you by Weldor's for Weldor's so that you can listen to Weldor's talk about Welding while you're Welding!       Podcast music can be found at https://www.youtube.com/watch?v=j3UyYZ85Tiw Doctor Vox -Endgames   Royalty Free Download