Woodworking Hand Tools & Techniques

On today’s show, I discuss  jointing really long boards, making curved moldings by hand, using thinner lumber to make a thick workbench top, rounding the corners of plane irons, and starting a woodworking related side business.

On today’s show, I discuss  paring yellow pine end grain, using cambered irons to square board edges, making moldings with a combination plane, more on reference surfaces, and sliding dovetails.

On today’s show, I discuss  a method for ensuring that large workbench leg mortises are square, controlling rust on items that can't be stored in a tool chest, saw wrests, and and proper use of reference surfaces.

On today’s show, I discuss  mouth opening on wooden planes, marking knives, leveling the bottoms of deep mortises, cambering a plane iron with a honing guide, and sharpening systems.

On today’s show, I discuss drawboring large tenons for workbenches, tools for spoon carving, plow planes, and camber on bench planes.

On today’s show, I discuss workbenches, butterfly keys, setting up a dado plane, chopping mortises square to the edge of the stock, and four common woodworking myths.

On today’s show, I discuss two-piece chip breakers, smoothing plane setup for controlling tearout, when to use haunched tenons, troubleshooting a smoothing plane, and scratch stocks.

On today’s show, I discuss pins first dovetail layout, fishtail chisels, setting up a toothing plane, miter boxes, beginner projects, and lessons learned from revisiting old projects.

On today’s show, I discuss planing the edges of thin stock, dado planes, replacing the blade and chipbreaker in a transitional plane, woods, glues and finishes for outdoor projects, and dealing with wood movement woes.

On today’s show, I discuss finishing both sides of a board, book matching veneer, cooper's jointer planes, workbench designs, pins vs. tails, hand tool jigs, boring straight with a brace and bit, and experimenting with historical practices in your shop.